Machine Tools Tenders

State Government

CTN :43117003

17 Dec, 2025 NA

Delhi - Delhi

Tender For enhancing the water supply by replacement of damaged e/m items of various tube wells installed vilaspur camp and mohan baba nagar under badarpur constituency ac-53. - s/o motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection, time delay power on programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa up to 10 hp. make: gain guard/skope/any reputed make., supply of mccb 63 amp, 4 pole, breaking capacity at 415 v: 35-36 ka, adjustable thermal setting (70- 100%) and fixed magnetic settings. make: - l&t/c&s/djb approved., providing & fixing of indicating lamps ryb along with complete wiring of above electrical components and with suitable size copper conductor wire (6sq mm, 4 sqmm , 2.5 sq mm & 1.5 sq mm) and suitable size ferrule/socket of required size insulating board i/c replacement of old and damaged components with above mentioned materials. job i/c testing & commissioning of complete panel board on load as per site requirement., s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable. make: - tata/jindal, s/o pvc insulated pvc sheathed flat cable with plain copper conductor having 3 cores for submersible motor of 4 sq mm size (each roll of 100 mtrs.) make: - grandlay/havells/gloster/djb approved, s/o ms nut bolts off size as per requirement., s/o rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

State Government

CTN :43117011

17 Dec, 2025 NA

Delhi - Delhi

Tender For augmentation of water supply by improvement of e/m equipments of various tube wells at neel giri apartment area under greater kailash constituency ac-50. - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.djb sor 2024-25 item code 45.1.93 make: - tata/jindal, s/o pvc insulated pvc sheathed flat cable with plain copper conductor having 3 cores for submersible motor of 4 sq mm size (each roll of 100 mtrs.) make: - grandlay/havells/gloster/djb approved, providing & fixing of indicating lamps ryb along with complete wiring of above electrical equipment and with suitable size copper conductor wire ( 6 sq mm,4 sq mm,2,5 sq mm & 1.5 sq mm) and suitable size ferrule /socket of required size insulating board i/c replacement of old and damaged component s with above mentioned material .job i/c testing & commissioning of complete panel board on load as per site requirement., providing and fixing of motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection, time delay power on programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa up to 10hp. make: gain guard/skope., s/o ms nut bolts off size as per requirement., s/o rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t & p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. beyond the depth of 250 feet.

State Government

CTN :43117016

17 Dec, 2025 NA

Delhi - Delhi

Tender For augmentation of water supply by improvement of e/m equipments of various tube wells in jj colony khanpur under ambedkar nagar constituency ac-48. - supply of mccb 63 amp, 4 pole, breaking capacity at 415 v: 35-36 ka, adjustable thermal setting (70- 100%) and fixed magnetic settings. make: - l&t/c&s/djb approved., s/o motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection, time delay power on programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa up to 10 hp. make: gain guard/skope/any reputed make., providing & fixing of indicating lamps ryb along with complete wiring of above electrical components and with suitable size copper conductor wire (6sq mm, 4 sqmm , 2.5 sq mm & 1.5 sq mm) and suitable size ferrule/socket of required size insulating board i/c replacement of old and damaged components with above mentioned materials. job i/c testing & commissioning of complete panel board on load as per site requirement., s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable. make: - tata/jindal, s/o pvc insulated pvc sheathed flat cable with plain copper conductor having 3 cores for submersible motor of 4 sq mm size (each roll of 100 mtrs.) make: - grandlay/havells/gloster/djb approved, s/o ms nut bolts off size as per requirement., s/o rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

State Government

CTN :43117050

17 Dec, 2025 NA

Delhi - Delhi

Tender For augmentation of water supply by improvement of e/m equipments of various tube wells in dda flats madangir under ambedkar nagar constituency ac-48. - s/o motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection, time delay power on programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa up to 10 hp. make: gain guard/skope/any reputed make., supply of mccb 63 amp, 4 pole, breaking capacity at 415 v: 35-36 ka, adjustable thermal setting (70- 100%) and fixed magnetic settings. make: - l&t/c&s/djb approved., providing & fixing of indicating lamps ryb along with complete wiring of above electrical components and with suitable size copper conductor wire (6sq mm, 4 sqmm , 2.5 sq mm & 1.5 sq mm) and suitable size ferrule/socket of required size insulating board i/c replacement of old and damaged components with above mentioned materials. job i/c testing & commissioning of complete panel board on load as per site requirement., s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable. djb sor 2021-22 item code -45.1.93 make: - tata/jindal, s/o pvc insulated pvc sheathed flat cable with plain copper conductor having 3 cores for submersible motor of 4 sq mm size (each roll of 100 mtrs.) make: - grandlay/havells/gloster/djb approved, s/o ms nut bolts off size as per requirement., s/o rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includeshiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

State Government

CTN :43117057

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of e/m equipment of various tube wells installed at sarai kale khan area under jangpura constituency ac-41. - supply of double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends and welded support l-type ms bracket in both flange with slot of submersible cable.make: tata/ jindal. , supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of weldedconstruction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long). make: granlay / havells./gloster/any djb approved make., supply of nut bolts, washer 1/2 dia 1 long full threaded., supply of rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gl pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gl pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

corporations/Associations/Others

CTN :43123169

11 Dec, 2025 NA

Chennai - Tamil Nadu

Tender For auction sale of condemned - tree wood cut pieces(as its condition),condemned - tree wood cut pieces (as its condition),condemned - air filters (as its condition),condemned - damaged air baloon (as its condition),condemned - waste gi scrap (as its condition),condemned - empty plastic barrel(as its condition),condemned - self motor (assorted)(as its condition),condemned - brake shoes with brake lining (assorted)(as its condition),condemned - atomizer (assorted)(as its condition),condemned - bs iii radiator core (alu.) (as its condition),condemned - electrical items (as its condition),condemned - bs iii tyre lock ring)as its condition,condemned - axle shaft (assorted) (as its condition),condemned - gear box (as its condition),condemned - radial tyre nylon tyre)(as its condition)

Central Government/Public Sector

CTN :42935037

15 Dec, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of non ferrous castings e e - e9710014064-packing ring adapter , oe9710743007bushing , oe9710743015-bushing , oe9710744046bushing, oil well comm no 06-027-676 , oe9710744054bushing, oil ewll comm no 06-027-678 , oe9710744135bushing, dia 53 - 25 lg , oe9710744143-bushing, , oe9710744178-bushing , oe9710744216-bush , oe9710744240-bushing , oe9710744259-bushing , oe9712384004-shoe - shifter fork , oe9714863139spray nozzle , oe9716614411-lantern ring , oe9716614420-lantern ring , oe9717363005-packing spacer , oe9718584030-water tube -e1400-fully machined , oe9751093015-bushing, oil well comm no 45-802-283 , oe9751093023-bushing, oil well comm no 45-220-004

Central Government/Public Sector

CTN :42549862

12 Dec, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras tender for supply of filter element : : - filter element , hydac code 003 0d010bn4hc or equivalent with filtration 10 microns , size l 94 mm , od 35 mm , mounting dia 11.5 mm , filter element (wire mesh type ) hydac code 0060d 025 w/hc or equivalent with filtration 25 micron , size l 84mm , od 47mm , mounting dia 21.5mm , filter element , hydac code 011 0d010bn4hcc or equivalent with filtration 10 microns , size l 153 mm , od 47 mm , mounting dia 22.2 mm , filter element hydac code 014 0 d 010 bn4hc or equivalent with filtration 10 micron , size l 193 mm , od 47mm , mounting dia 21.5mm , filter element hydac code 016 0 d 020 bn4hc or equivalent with filtration 20 micron , size l 116 mm , od 69mm , mounting dia 33.5mm , filter element (wire mesh type ) hydac code 0160 d 025 w/hc or equivalent with filtration 25 micron , size l 117 mm , od 69mm , mounting dia 33.5mm , filter element , hydac code 0240-d-020-bn4hc or equivalent with filtration 25 micron , size l 173mm , od 69mm , mounting dia 34.2mm , filter element for return line filter hydac code 0060 r 010 bn4hc or equivalent with filtration 10 micron , size l 101 mm , od 51.5mm , mounting dia 21mm , filter element for return line filter hydac code 0160 r 010 bn4hc or equivalent with filtration 10 micron , size l 145 mm , od 73mm , mounting dia 32.5mm , filter element for return line filter hydac code 0330 r 020 bn4hc or equivalent with filtration 20 micron , size l 195 mm , od 95mm , mounting dia 48mm , filter element for return line filter hydac code 0500 r 005 bn4hc or equivalent with filtration 5 micron , size l 277 mm , od 95mm , mounting dia 48mm , filter element for return line filter hydac code 0660 r 020 bn4hc or equivalent with filtration 20 micron , size l 335 mm , od 114.5mm , mounting dia 67.5mm , suction strainer hydac code 0025 s 125 w/-b0.2 or equivalent with filtration 125 micron , size l 144 mm , od 63mm , mounting size 3/4 inch bsp-14 tpi thread , suction strainer hydac code 0050 s 125 w/-b0.2 or equivalent with filtration 125 micron , size l 159 mm , od 63mm , mounting size 1 inch bsp- 11 tpi thread , suction strainer hydac code 0100 s 125 w/-b0.2 or equivalent with filtration 125 micron , size l 229 mm , od 86.5mm , mounting size 1 1/2 inch (1.5 inch) bsp- 11 tpi thread , filter element , mahale code pi 4105 ps 25 or equivalent with filtration 25 micron , size l 93 mm , od 47 mm , mounting dia 25.5 mm , filter element (wire mesh type ) sofima code cch153fv1 or equivalent with filtration 60 micron , size l 210 mm , od 45mm , mounting dia 24mm , suction strainer omt code sf4 6b-12-gr125 or equivalent with filtration 125 micron , size l 106 mm , od 46mm , mounting size 1/2 inch -14 tpi bsp thread , suction strainer omt code sf6 4b-100-gr125 or equivalent with filtration 125 micron , size l 139 mm , od 64mm , mounting size 1 inch-11 tpi bsp thread , suction strainer omt code sf8 6b-112-gr125 or equivalent with filtration 125 micron , size l 200 mm , od 86mm , mounting size 1 1/2 inch (1.5 inch) - 11 tpi bsp thread , filter element for return line filter (wire mesh type) omt code cr112r90a or equivalent with filtration 50 micron , size l 137 mm , od 70mm , mounting dia 28mm , suction strainer with filtration 125 micron , size l 169 mm , od 86mm , mounting size 1 1/2 inch (1.5 inch) -11 tpi bsp thread , spin on filter element , omt code cs 10 en or equivalent with filtration 125 micron , size l 183mm , od 129mm , mounting dia 1 1/4 inch-11 tpi bsp thread , filter element for return line filter hydac code 0330 r 050 bn4hc or equivalent with filtration 50 micron , size l 195 mm , od 95mm , mounting dia 48mm

CTN :42842817

29 Dec, 2025 16.90 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28- ea-0957)against tn-sc-638/2025-26(mm) - high pressure hose reel with 60mm lg x 19 mm ( ) with fog gun and spray type, low pressure hose reel with 19 mm x 50 mm long hose with duel purpose shut off nozzle., extension ladder 10.5 meter, delivery hose 63 mm rubber lined in 30 m length (type b of is 636/79/5) complete with instantaneous coupling., long line 50 mm circumference 30 m long as per is 1084., short line 50 mm circumference 15m length as per is 1084., protective clothing for fireman complete with golves, boots, helmets with suitable face shield mad out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame. the suit will be of sufficient size to accommodate a breathing apparatus to users (item should be packed in hard body box)., fire hook, fire man axe, sledge hammer, carpenter saw, pick axe, celling hook, crow bar made of carbon steel, self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit), dividing breeching, collecting breeching, pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long., suction strainer for item 2, basket strainer suitable for item 4 , is : 3582, dividing breaching with control arrangement as per is : 5131, collecting breaching as is : 905, hose bandages rubberized is : 5612, hose clamps is : 5612, water curtain nozzle made of m .s .plate with g . m instantaneous connection, branch pipe short ( chromium plated) is : 903, a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ), adapter for 100mm suction female thread and 63mm male instantaneous, adaptor double female instantaneous pattern 63mm ., adaptor double male instantaneous pattern 63mm, hand lamp ( 4cells ), rubber gloves 33kv 1 pair, fire beater, foam pick up tube, rubber gloves as per is 4770 - 1991 for 5000 volts, leather gloves is 6994 1977, jack hydraulic for 20 ton capacity with handle, hand controlled branch for 63 mm size hose coupling, hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy., bolt cutter 600mm long, shovel with handle, minimum 12v halogen fog & spot lamps, hose ramp

CTN :42933290

15 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 1000446272 procurement of filters from oem ms bhagwati filters pvt ltd for bpcl mr ta 2026 : : - glass fibre filter elemnt 10mic , bhagwati , element , filter , bhagwati , mm 541 p25 , strainer , suction , bhagwati , element , filter , 25 micron , bhagwati , element , filter , oil , governing , bhagwati , element , filter , bhagwati , mm 541 p25 , element , filter , 25 micron , bhagwati , element , filter , oil , governing , bhagwati

By Cities

By States

By Agencies

By Ownerships

By Sectors