Non Classified Tenders

Central Government/Public Sector

CTN :40699508

23 Jun, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of sealing materials (sealing cord) for metallic threaded joints in contact with 1st,2nd and 3rd family gases and hot water non-hardening jointing compounds conforming to bs specification en 751-2- 1997 class arp compound with dvg w/csa/nsf/ansi-61/ as-nzs-4020 approval. material required in packing of 150 meters spool. [ warranty period: 30 mon ths after the date of delivery ]

Central Government/Public Sector

CTN :40700930

17 Jun, 2025 NA

Kanakapura - Karnataka

Tender For set of carline assly for 3 phase memu tc coach, as per drawing: mpmemut3cla version 4, packing instruction: carline assly the supplier shall pack the three c/set (segme nts) of carlines in a suitably designed robust returnable metallic cage/structure in su ch a way that carlines shall not get entangle, damaged, twisted, dented during trans portation, storage, handling and lifting and to avoid scratches on outer surface suit able environment friendly cushioning material is to be placed between two segments, t ransit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear appr oximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature pr ofile of bottom carline should match with the profile of packing cage and it can acco mmodate fork lifter arms for lifting and transportation. it should have standard cla mping/fastening mechanism to facilitate easy unpacking & unloading. it should have fir m's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open s ky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warra nty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40701004

30 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of heavy duty aluminium ferrules of size 95sq.mm,compression type, suitable to acco mmodate aluminium cable of size 95sq.mm,rated voltage up to 11kv,designation .it shall be of silver colour ,surface finish-galvanized,usage-industrial,shape?round,size-95sqmm. dimensions:- inner dia:-(13.0 -13.3) mm; outer dia:-(17.3-17.5)mm; length-not less than 60mm accepted make:- swastik,tlc,ascon,dowel ls or similar [ warranty period: 30 months after the date of delivery ]

CTN :40628731

16 Jun, 2025 NA

Sirsa - Haryana

Tender For corrigendum : rate contract for medicine/ coivd items/ortho implants 2025-2026, district sirsa - anti hemophillic factor vii injection 1mg,vial/ampoule, anti hemophillic factor vii injection 2mg,vial/ampole, anti hemophillic factor viii inhibitor bypassing agent injection 500 iu,vial/ampoule, purified freeze dried human coagulation factor viii, virus inactivated injection 250 iu, purified freeze dried human coagulation factor viii, virus inactivated injection 500 iu, anti hemophillic factor ix vial injection size 500 /600 iu, actinomycin injection 0.5 mg, adrenaline intracameral injection for eye, agfa x-ray cassette without i.p 10x12, agfa x-ray cassette without i.p 14x17, albumin kit 5x50ml (j. mitra), albumin kit 5x50ml (tulip), alkaline phosphatase kit liquix-m 6x6 ml (j. mitra), alkaline phosphatase kit liquix-m 6x6 ml (tulip), amh (clia) 2*100t (mindray), amh (clia) 2*50t (mindray), anti ab 1 x 10ml (erba), anti ahg 5 ml(erba), anti ahg 5 ml(j. mitra), anti d 10 ml (j. mitra), anti d blend (erba), anti d blend (j. mitra), anti d igg/igm 1 x 10ml (erba), anti d igg/igm 1 x 10ml (j. mitra), anti h 5 ml (erba), anti h 5 ml (j. mitra), anti h lectin 1 x 5ml (erba), anti h lectin 1 x 5ml (j. mitra), anti lectin a1 (j. mitra), antibiotic disc - polymyxin b (himedia), atropine eye ointment 1%, 5g, automated extraction kits (for thermo scientifix for kingfisher flex automated extraction system ,96 well) rt-pcr lab, automated extraction kits (for thermo scientifix for kingfisher flex automated extraction system ,96 well) rt-pcr lab, balance salt solution (bss solution) - clearsol, bandage contact lens (bcl), bar code print label roll 50mm x 25mm x 100metres, beaker glass 2 ltr, bilirubin kit 60mlx4 (j. mitra), bilirubin kit 60mlx4 (tulip), biopsy punch (set) (ss, cylindrical with 0.5,0.8 & 1cm)(ss/304 min.), blood agar (himedia) 200gm, blood culutre bottle 20ml-glucose broth ((himedia), blood culutre bottle 50ml-glucose broth ((himedia), blood culutre bottle 5ml-glucose broth ((himedia), blood glucose kit 2x200ml (j. mitra), blood urea kit 20mlx5 (j. mitra), borosil reagent bottle 500ml, borosilicate glass 3 ltr, borosilicate glass 5ltr., brain-heart infusion agar (himedia) 200gm, brain-heart infusion broth (himedia) 100gm, brain-heart infusion broth (himedia) 200 gm, brain-heart infusion broth (himedia) 500gm, bunsen burner, bupivacaine injection 0.5%, 5ml amp.(neon), calcium hydroxide , paste system based and catalyst -radiopaque (dentsply/dpi/gc), calcium hydroxide + iodoform paste for root canal treatment (meta biomed/ pervest/spetodont), calcium hydroxide, powder (dentsply/ prevest), capsular tension ring (morcher 14), capsulorhexis ultrafine forceps, carbachol 3 % opthalmic solution, chocolate agar (himedia) 200gm, chocolate agar (himedia) 100gm, cholestrol kit 5 x 20ml (j.mitra), citrate agar (himedia) 200gm, cleaner for cell counter erba h-360, 50ml., cleaner for rapid-3200, 100ml, conjugated estrogen 0.625mg tablet, crp kit (erba), crp kit (j. mitra), crp rapid card (erba), crp rapid card (j. mitra), cryo box (moxcare), cryo marker, cryo tags (moxcare), cryo vial 1.8ml (moxcare), d-dimer control kit for ecl 412, d-dimer control kit for tulip turbosmart, d-dimer kit for tulip turbosmart, deltamethrin 2.5% wp per kg, digital balance board with tab, diluent for rapid-3200, 20ltr, dna blood extraction kit, doxycycline (himedia), ecg electrodes (neonate), ecg machine chest electrode (metal clamp), empagliflozin tablet 10 mg, erba am kit for em-200, erba am kit for em-360/xl-360, ethanol absolute 500ml (nice), fentanyl injection 50 mcg/ml, 2ml ampoule, ferritin (2*100 t/kit) (mindray), ferritin (2*50 t/kit) (mindray), ferritin calibrator 3*2ml mindrey, fields stain solution a bottle 125 ml (nice), fields stain solution b bottle 125 ml (nice), filter pipette micro-tips (sterile) 10 ul, filter pipette micro-tips (sterile) 20 ul, filter pipette tips (sterile) 100 ul, filter pipette tips (sterile) 1000 ul, filter pipette tips

CTN :40701923

30 Jun, 2025 NA

Patiala - Punjab

Tender For supply of white tag cotton 45 cm length shoes lace pattern with mettalic ferrules l ength of ferule should be between 20 mm to 30 mm. [ warranty period: 30 months after the date of delivery ]

CTN :40694604

18 Jun, 2025 1.50 Lacs

Bagpat - Uttar Pradesh

Tender For purchase of paking and jointing - paking and jointing [make excel, ferrolite and champion], jointing compressed asbestos fiber jointing sheets for (a) steam - (i) metalic (ii) non metalic (b) high pressure steam - (i) metalic (ii) non metalic (c) red/gray graphited - (i) metalic (ii) non metalic (d) for superheated high pressure steam - (i) metalic (ii) non metalic (e) for oil - (i) metalic (ii) non metalic (f) for acid - (i) metalic (g) in all jointings except the acid - (i) metalic (ii) non metalic, packing: (a) white asbestos yarn (non metalic) (i) 1.6 to 6.0 mm 1/2 kg spools (ii) 1.6 to 6.0 mm 1 kg spools (b) asbestos graphited yarn (i) 1/2 kg spool (ii) 1 kg spool (c) white dry asbestos plated packing (d) asbestos graphited and lubricated packing (non metallic) (e) self lubricating asbestos packing (f) self lubricating asbestos plated packing non metallic graphited (g) ptfe asbestos plated packing (teflon)

Central Government And Public Sector

CTN :40403522

20 Jun, 2025 NA

Surat - Gujarat

Tender For corrigendum : supply of industrial x ray film - very fine grained, high contrast, type- ndt-4 industrial xray film. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , very fine grained, medium speed, high contrast class-1 industrial x-ray film, type- ndt-5. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , fine grained, high contrast, high speed class-ii industrial x-ray film, type- ndt-7. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , film cutter, size 16inch or 40cm or higher but less than 20inch or 50cm. , x-ray film pvc cassette double envelope inner and outer size 12inch x 15inch with lead intensifying screen front 0.10mm and back 0.15mm. , x-ray film pvc cassettes double envelope inner and outer size 3inch x 5inch with lead intensifying screen front 0.10mm and back 0.15mm. , x-ray film pvc cassettes double envelope inner and outer size 3inch x 7.5inch with lead intensifying screen front 0.10mm and back 0.15mm. , x-ray film pvc cassettes double envelope inner and outer size 4inch x 6inch with lead intensifying screen front 0.10mm and back 0.15mm. , astm e-747 wire type iqi or penetrameter 1a, ss material. , astm e-747 wire type iqi or penetrameter 1b, ss material. , astm e-747 wire type iqi or penetrameter 1c, ss material. , astm e-747 wire type iqi or penetrameter 1d, ss material. , astm hole type pentameter as per astm-e1025 with calibration certificate, material carbon alloy and stainless steel. no. 5,7,10,12,15,17,20,25,30,35,40,45,50, 5 numbers each. , set of lead number 0 to 9 for industrial radiography testing, size 5mm to 6mm. , set of lead number 0 to 9 for industrial radiography testing, size approx. 10mm. , set of lead letter a to z for industrial radiography testing, size 5mm to 6mm. , set of lead letter a to z for industrial radiography testing, size approx. 10mm. , developer powder make to 13.5 ltrs., industrial radiography film processing chemical. , fixer with hardener powder make to 13.5 ltrs., industrial radiography film processing chemical. , wetting agent for industrial radiography film processing, wash purpose, make to 200 ltrs. , industrial yellow chalk. , industrial x-ray film, typendt-2. size 12inchx15inch or 30cm x 40cm in pack of 50 sheets. , astm hole type pentameter as per astm-e1025 with calibration certificate, material aluminum. no. 5,7,10,12,15,17,20,25,30,35, 40,45,50, 5 numbers each.

CTN :40674167

02 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of cctv camera - 4 mp ptz camera mega sensor 1 oblic 2 point 8 inch , 4 mp bullet camera , poe indicator light yellow , 32 channel nvr user interface gui , 8 tb ssd 560 oblic 530 mbps and 15 gbps interface , 2u rack rack 4 u mini wall mounted rack with lock , 42 inch color display with securing clamps , cat 6 awg copper shielded cable , 3 core x 2 point 5 sqmm multistatndered copper shield cable , cable lying charges including gland opening and packing , heavy duty input output metallic boxes with face plates for cat 6 cable , installation and connectorasation

CTN :39815976

12 Jun, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For bid to ras bid to ras repair and overhauling service - 4254 installation of new equipment and degutting of aber equipment onboard ins kora; aber equipment; no; buyer premises-1 degutting of deep fat fryer job 1, (a) marking of cables prior de-connectorisation, (b) de-connectorisation of power supply from the jds/dbs as indicated by ss. precaution, to be exercised while working on jb and work to be carried out in presence of ship staff to, ensure that the said jb is not live., (c j degutting of all associated power and interface cables., (d) loosening/ removal of al foundation bolts for degutting of the equipment. any hot, work/heat assistance required for opening/cutting of foundation bolts is to be catered by, (e) removal of all equipment and subassemblies from foundation and shifting of item to, place as indicated by nsry (svp). assistance in form of crane. fork lift, trailer etc will be, provided by nsry (svp), however, slings, d shackles or any other lifting setup required, is to be catered by vendor., (f) gland packing is to be undertaken post degutting of cables at all effected locations with, compound as indicated, installation of new deep fat fryer, (g) placement of the equipment at the indicated location/foundation by using chain, pulley/trolley etc. due caution is to be exercised so as to not damage the new equipment, while shipping., i(h) tightening of foundation bolts post placement of the equipment, i(j) laying of cables as per bpslwlds from various interfaces/dbs/jbs as indicated, (k) marking of the cables is to be undertaken to identity to and from of the cables, (i) putting of new cable trays for securing of the cables with aluminum clamps and nut, bolts., (m) manufacture and fitment of metallic cable and equipment tallies as per dimension and, test provide by nsry(svp), 2 degutting of cooking range oven with control panel 14.5 kw job 1, (a) marking of cables prior de-connectorisation, (b) de-connectorisation of power supply from the jds/dbs as indicated by ss. precaution, to be exercised while working on jb and work to be carried out in presence of ship staff to, ensure that the said jb is not live., (c) degutting of all associated power and interface cables., (d) loosening/ removal of al foundation bolts for degutting of the equipment. any hot, work/heat assistance required for opening/cutting of foundation bolts is to be catered by, (e) removal of all equipment and subassemblies from foundation and shifting of item to, place as indicated by nsry (svp). assistance in form of crane. fork lift, trailer etc will be, provided by nsry (svp), however, slings, d shackles or any other lifting setup required, is to be catered by vendor., (f) gland packing is to be undertaken post degutting of cables at all effected locations with, compound as indicated, installation of new cooking range oven with control panel 14.5 kw, (g) placement of the equipment at the indicated location/foundation by using chain, pulley/trolley etc. due caution is to be exercised so as to not damage the new equipment, (h) tightening of foundation bolts post placement of the equipment, (j) laying of cables as per bpslwlds from various interfaces/dbs/jbs as indicated, (k) marking of the cables is to be undertaken to identity to and from of the cables, (i) putting of new cable trays for securing of the cables with aluminum clamps and nut, bolts., (m) manufacture and fitment of metallic cable and equipment tallies as per dimension and, test provide by nsry(svp), 3 degutting of cooking range 7 kw job 1, ja) marking of cables prior de-connectorisation, (b) de-connectorisation of power supply from the jds/dbs as indicated by ss. precaution, to be exercised while working on jb and work to be carried out in presence of ship staff to, ensure that the said jb is not live., i(c) degutting of all associated power and interface cables., (d) loosening/ removal of al foundation bolts for degutting of the equipment. any hot, work/heat assistance required for open

Central Government/Public Sector

CTN :40681661

13 Jun, 2025 NA

Kanakapura - Karnataka

Tender For set of carline assly for 3 phase memu tc coach, as per drawing: mpmemut3cla version 4, packing instruction: carline assly the supplier shall pack the three c/set (segme nts) of carlines in a suitably designed robust returnable metallic cage/structure in su ch a way that carlines shall not get entangle, damaged, twisted, dented during trans portation, storage, handling and lifting and to avoid scratches on outer surface suit able environment friendly cushioning material is to be placed between two segments, t ransit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear appr oximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature pr ofile of bottom carline should match with the profile of packing cage and it can acco mmodate fork lifter arms for lifting and transportation. it should have standard cla mping/fastening mechanism to facilitate easy unpacking & unloading. it should have fir m's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open s ky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warra nty period: 30 months after the date of delivery ]

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector