Other Machinery Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Corporations And Associations And Others

CTN :45488872

06 Jul, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrie

Central Government/Public Sector

CTN :45722727

06 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

Central Government/Public Sector

CTN :45722728

06 Jul, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - scrap and unserviceable condemned mix m.s. coach cutting items & various types of similar items such as , body side door m.s., p.o.h. coaches realised corroded pieces,air brake,clamp,pipe pin,m.s. door of battery box ,m.s.ventilation door,foot plate,ice box,m.s. spring,m.s. angle,and m.s. lader with rubber coating,coach cuttings, coach doors , seat frames , bearth/seat frames, light head stock cuttings, train lighting fittings,, side lamps lamp hand signal, fittings, tail lamp fittings, cft/tl light fittings, ictp/ icfp empty swich boxes tail lamps, tube light fittings, tube light jali, fan blades, fan jali, fan guards fan ribs, fan rings, empty power pannels, signal platform, destination board, valley board, letter board,ms signal base, loc, inercooler, nut bolts and other hardwares, m s furniture.m s wheel stand,window grill, ms measuring cans, tins, racks, break pipes, silencer of tower wagon, dust bin, ms pipe and cut pcs. of ms pipes, rods, ms bars released from broken constructin, compressor spring, wire /coil springs, ms rope wire, pcs. of brake beam pipes, stands, m s ferrous light junk kachra related scrap i.e ms angles, chanels, flats pcs. of cable racks/laders ms brackets, dust bin stand, tin fuse box, fire extinguisher, empty glow sign boards, empty electrical pannel, ms stand, oven, earthing patti, empty cable tray, fly catcher, galvanized patra / sheet and their cut offs, cut pieces of ms cupboards, rack etc, plain/ corrugated / toughened sheets and its cut pcs. such as strips, patties, patties, patra, rings, coils, boxes, ms brake control cover, patra, angle, small springs, pins, wire, electric point, shunt signal unit and post. signal ladder , location box, earth electrode , signal post and base , signal unit, point roddings , junction route indicator and cut pieces in mijscellaneous, coil, collapsible doors and shutters and their parts/cut offs, grills , channel grills, compound /bridge jali with or without frame, ms fencing and their parts, fencing patties, angle pcs., frames,wire mesh, g.i./ms pipes and tubes , tubes and their cut pcs, damaged gi/ ms pipes/ rods/ tubes and their pcs. , ms/galvanised boxes, junction box, switch boxes, empty convertor, payary (steps), filters, rings, nut bolts, u clips, pipe pin, gate m/c dismentled, liquid container, damaged video boxes and their cut offs, crt cabinet, location boxes , jumper, jumper box,ground connections , basket steel, water cane/ material carring trolley,steel baskets, containers, trays, frames, stretchers, nets/ jali , released ground connection, halogen, panto pans, compressor spares, dust guard, air filters and filter covers, ms/gi duct and its parts,insulating armature of signal cable, hand lamps, side lamps, signal lamps petromax, hs lamp, clamps, signal post,signal platform, signal base, ms/ gi wire/ coil, funnels, wall protectors, boxes, iron bar pcs released from broken construction , desmantelled weighing machines parts/ covers etc. ms pipe with or without ci attachment, bins, plates, rings, spares/ parts /body of weighing machine , platform weighing machine and its parts, pressure switches and other switches , signal parts, location boxes,panel board,fuse box,mdb board,pedestial for lc gate and their cut parts and other ferrous miscellaneous scrap items with or without minor nf/ss/ wooden / rubber / rexine attachments of sorts and sizes, broken and damaged, u/s for rly. use, excluding items: rail and rail pcs., axles and axle pcs., wheel tyre and pcs., cam shafts, helical springs, bolster springs, buffer plungers, face plates, axle box housings/ casings, brake beams, fish plates, screw couplings/draw bar hooks, break beams, reservoir tanks, st sleepers and other various types of similar ms items etc. note: 1. hammering/ pressing/ cutting is permitted for easy loading only, 2. if found any non-ferrous item will not be delivered (qty approx)

CTN :45606519

03 Jul, 2026 NA

Coonoor - Tamil Nadu

Tender For corrigendum : supply of machinery spares and workshop tools to all tantea factories - machinery spare, uj cross (srmt make) rll 793 type 47mm x 134mm (big cup), uj cross (srmt make) rll 790 type (small cup), uj cross 39.69 mm x 115.65 mm, uj cross 34.94 mm x 125 mm, propeller shaft - for sennova ctc, teflon bellow for kilnburn drier ff model 5500 mm x 250 mm x endless, teflon bellow 250 mm width x 5240 mm endless, teflon bellow 250 mm width x 5250 mm endless, teflon bellow 4000 mm x 250 mm x endless, teflon bellow 4400 mm x 250 mm x endless, gun metal gable bush for 18" rotor vane (l-160mm, id-79mm, od-112mm), arm centre gun metal bush for 18" rotor vane (l-75mm, od-68mm, id-48mm), coupling set for 18" dia rotor vane shaft (78 mm bore 22 mm x 6 mm key size) (vikram make), coupling set for 18" dia rotor vane shaft (95 mm bore 26 mm x 6 mm for gear box shaft end key size (vikram make), gable bush (gun metal) od-95mm, id- 69.5mm, l-125mm, gable bush (gun metal) od-106 mm, id- 80 mm, l-160 mm, arm centre bush (gun metal od-75 mm, id-38mm,l-100 mm, arm centre bush (gun metal od-63 mm, id-50.8 mm, l- 76mm, rotor vane 18" coupling rubber bush, rotor vane 15" coupling rubber bush, rotor vane 18" coupling pin, rotor vane 15" coupling pin, hammer (for impact pulverizer), beater (for kaysons pulverizer), bucket elevator conveyor, elevator bucket (s.steel), round type rubber bush, square type rubber bush, gun metal split bearing for middleton (split bush), frp - strip (teflon) size 2"x1/4"x13", frp strips 2"x13"x 5mm thick, 12"x2"x6mm frp teflon blade for green leaf sifter, shredder blade l- (17.5mm) 445mm, bore - 45mm, width - 75mm, thickness - 6mm, m.s. sheet-8x4x18g, gun metal bush od-39 mm, id- 19mm, l-45mm, nylon bush od-39 mm, id- 19mm, l-45mm, gun metal bush od-30 mm, id- 12mm, l-45mm, workshop tools, 52 lh single angle milling cutter m+15 (addision make), 55 lh single angle milling cutter m+15 (addision make), 62 lh single angle milling cutter m+15 (addision make), 65 lh single angle milling cutter m+15) (addision make), 60 lh single angle milling cutter m+15 (addision make), 70 lh single angle milling cutter m+15 (addision make), 10 tpi v profile grooving chaser m+15-102 th (addision make), 8 tpi v profile grooving chaser m+15 -120th (addision make), 8"x1"x1/2" green colour grinding wheel rough & smooth, 8" dia grinding wheel rough & smooth, 4" dia disc grinding wheel, grinding stone 8"x1"x5/8" rough and smooth, cup shape grinding stone, 16" x4" grinding wheel 1" thick, 4" cut off wheel, 24" measuring scale - metal, mesuring tap 3 mtr

Central Government/Public Sector

CTN :45701750

03 Jul, 2026 NA

Ajmer - Rajasthan

Tender For auction sale of depot miscellaneous scrap - scrap u/s various type of hand drill machine, hand grinder, and cutter (small = 181 nos and big = 69 nos)of sorts and sizes. all 250 nos. will be delivered. loading by purchaser. e- waste certificate is required. location: gd no. 2 bin no 251

CTN :45673277

03 Jul, 2026 1.50 Lacs

Garhwal - Uttarakhand

Tender For supply of hard case for sound speaker , strapping packing machine , garhwal rifle regimental flag , territirial army flag , stainless steel insulated flask capacity 2 ltr

CTN :45666916

03 Jul, 2026 NA

Ambala - Haryana

Tender For supply of bagasse and cane carrier chains, spares and slates 150mm pitch bagasse carrier chain, 229 mm pitch forged block type chain, 150 mm pitch cane carrier chain

State Government

CTN :45455477

06 Jul, 2026 29.66 Lacs

Bidar - Karnataka

Tender For corrigendum : supply of equipments & goods to veterinary college, bidar - table top weighing scale (call-2), platform weighing scale (call-2), mixer grinder (call-2), tilting grinder (call-2), exhaust system installation charges (call-2), mug starter for blower (call-2), gi ducting (call-2), ss filters (call-2), exhaust hood (call-2), centrifugal blower (call-2), three sink unit with splash back (call-2), insect killer (call-2), coconut scrapper with stand (call-2), onion/potato bin (call-2), stainless steel rack of 5 shelves (call-2), spoon sterilizer(call-2), two shelves trolley (call-2), platform trolley (call-2), hood type dishwasher (call-2), four vessel bain marie with tray slide (call-2), vegetable cutting machine with 6 nos. blades (call-2), four door reach in freezer (call-2), water dispenser with in built uv purifier - cold, normal and hot 3 taps (call-2), dough ball making machine (call-2), semi automatic chapathi making machine (800-1000/hour) (call-2), semi automatic chapathi making machine (500 - 600/hr) (call-2), dosa tawa (call-2), two burner cooking range (call-2), single burner bulk cooking range (call-2), steam system installation charges (call-2), ss ball valve 3/4 in (call-2), steam pipe line (call-2), idli box with stand (call-2), sambar vessel with stand (call-2), rice vessel with stand (call-2), steam boiler call-2

Central Government/Public Sector

CTN :45638468

30 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For gp-11:- cheque pass book first class %u201ca%u201d foreign line containing 100 leaves (1x100 of 02 counter foil). size- 5.5x11.0 inch. paper to be used %u2013 indian railway logo watermark paper white 58 gsm conforming to is-1848/2007 or latest for text pages and paper kraft 130 gsm to is : 1397/1990 or latest for cover. printing- the book to be printed both side in hindi & english bilingual with black ink and be machine serial numbered in 06-08 digits in alpha numeric series at two places on each page strictly as per specimen and allotted serial number. binding- lump bound two wire stitches on left. the art work for printing and sample book complete should be got approved from consignee before bulk supply. packing :- 04 bundles each of 10 books shall be packed in suitable size five ply corrugated paper constructions carton box conforming to is : 2771 (part-1) 1990 with amendment no.1 and 2 and style 0620 od is : 6481/1971. the carton box shall be then closed with gum paper tape 50 mm wide (min.) and finally secured by 02 nos nylon strapping of size 13mm wide each side. the edges of nylon strap should be heat sealed overlapping each other by minimum 25 mm. packing slip to be pasted on carton box indicating po no. & other details. as per drg.no. denoting number gp 8 specn: spec:as mention in description above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector