Plastic Tubes And Pipes Tenders

State Government

CTN :45480381

15 Jun, 2026 12.32 Lacs

Delhi - Delhi

Tender For replacement of old damaged 150mm dia hdpe water line by providing and laying of 150mm dia new d.i water line to improve the water supply network in tigri ward in deoli ac-47 under ee(c)-30.

State Government

CTN :45480382

15 Jun, 2026 16.35 Lacs

Delhi - Delhi

Tender For replacement of old damaged 150mm dia hdpe water line by providing of 150 mm dia new d.i water line for filling the c-block booster in tigri in deoli ac-47 under ee(c)-30.

State Government

CTN :45475772

22 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For purchase of modern irrigation system material with installation - , tube od 16 mm cl 2 linear low density polyethylene lldpe -is 3395, mini sprinkler 1.20 m rod 8mm extention tube 1.2 m with assembly, poly grommet take off 16 mmx 13 mm (material- high quality plastic or rubber), lateral end stop " 8" shape for 16 mm tube (material -pvc), line joiner 16mm working pressure 1kg/cm2 (material- high quality plastic or pvc), mini valve 16mm x 16mm( material- pvc/hdpe), barbed poly tee 16 mm diameter (material- pvc/hdpe), barbed elbow 16 mm diameter (material- pvc/hdpe), flush valve 75mm, working pressure 6kg/cm2 (material- pvc), control valve, size 63mm outer dia., molded seal plain, double union (material- pvc/hdpe) pn10, pvc non return valve, size 75mm dia., plain, double union (material- pvc/hdpe) pn 10, water supply sand filter 75mm, 8kg/cm2 pressure, agricultural & industrial use, , tube od 16 mm cl 2 linear low density polyethylene lldpe -is 3395, mini sprinkler 1.20 m rod 8mm extention tube 1.2 m with assembly, poly grommet take off 16 mmx 13 mm (material- high quality plastic or rubber), lateral end stop " 8" shape for 16 mm tube (material -pvc), line joiner 16mm working pressure 1kg/cm2 (material- high quality plastic or pvc), mini valve 16mm x 16mm( material- pvc/hdpe), barbed poly tee 16 mm diameter (material- pvc/hdpe), barbed elbow 16 mm diameter (material- pvc/hdpe), flush valve 75mm, working pressure 6kg/cm2 (material- pvc), control valve, size 63mm outer dia., molded seal plain, double union (material- pvc/hdpe) pn10, pvc non return valve, size 75mm dia., plain, double union (material- pvc/hdpe) pn 10, water supply sand filter 75mm, 8kg/cm2 pressure, agricultural & industrial use, , tube od 16 mm cl 2 linear low density polyethylene lldpe -is 3395, mini sprinkler 1.20 m rod 8mm extention tube 1.2 m with assembly, poly grommet take off 16 mmx 13 mm (material- high quality plastic or rubber), lateral end stop " 8" shape for 16 mm tube (material -pvc), line joiner 16mm working pressure 1kg/cm2 (material- high quality plastic or pvc), mini valve 16mm x 16mm( material- pvc/hdpe), barbed poly tee 16 mm diameter (material- pvc/hdpe), barbed elbow 16 mm diameter (material- pvc/hdpe), flush valve 75mm, working pressure 6kg/cm2 (material- pvc), control valve, size 63mm outer dia., molded seal plain, double union (material- pvc/hdpe) pn10, pvc non return valve, size 75mm dia., plain, double union (material- pvc/hdpe) pn 10, water supply sand filter 75mm, 8kg/cm2 pressure, agricultural & industrial use, , tube od 16 mm cl2 linear low density polyethylene (lldpe) -is-3395, mini sprinkler 1.20 m rod, 8mm extention tube 1.2 m with assembly, take off 16 mm x 13mm (material - high quality plastic or rubber ), lateral end stop "8" shape for 16 mm tube (material- pvc), line joiner 16mm, working pressure 1kg/cm2 (material - high quality plastic or pvc ), mini valve 16mm x 16mm, (material- hdpe), barbed poly tee 16 mm diameter (material- pvc/hdpe), barbed elbow 16 mm diameter (material- pvc/hdpe), flush valve 75mm, working pressure 6kg/cm2 (material- pvc), control valve, size 63mm outer dia., molded seal plain, double union (material- pvc/hdpe) pn10, pvc non return valve, size 75mm dia., plain, double union (material- pvc/hdpe) pn 10, water supply sand filter 75mm, 8kg/cm2 pressure, agricultural & industrial use

Central Government / Public Sector

CTN :45478545

26 Jun, 2026 1.17 Crore

Dhanbad - Jharkhand

Tender For tender for supply of electrical consumable and miscellaneous items for hurl sindri c - cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-100mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-200mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length 300mm, material nylon 66, pack size 100. electrical contact cleaner spray, quick dry, packing size for liquid(ml)-500ml galvanized zinc spray, finish type-bright silver, zinc-enriched coating to repair surface damage protection against corrosion, special feature-rust resistance, packing size for liquid(ml)-500ml. silica gel, colour of silica gel-blue, particle size -9 to 12 mm, air tight container for packing of silica gel-plastic. silicon sealant, physical state- viscous paste, appearance-translucent/ opaque, color-clear/black/white/gray, surface cure-5-10 min, packing size(ml)-300ml m-seal, shelf life 12 months, hardness 75-80, impact strength - 2.5 * 3kg / c * m setting time at 30 deg c min-60 min, working temp limit 80 deg. c component resin and hardness, packaging size-1 kg gap filling pu foam spray(puf seal), application fill the gap between wall & tray, conduit pipe and wire sealing, packing size for liquid(ml)-750ml. silicon sealant gun, feed type: push-fed gun, type: cordless-corded glue gun pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour red, length-6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive- rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour yellow, length 6.5 mtr, voltage resistance-lipto 600v. pvc tape, material-pvc, adhesive- rubber bases adhesive, adhesive side-single side, temperature range (-40 degree c to 125 degree c), colour blue, length 6.5 mtr, voltage resistance-upto 600v pvc tape, material -pvc, adhesive rubber bases adhesive, adhesive side- single side, temperature range(-40 degree c to 125 degree c), colour-black, length 6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour green, length 6.5 mtr, voltage resistance upto goov ht-tape, self bonding electric tape, for high-voltage(upto 69kv), corona and ozone resistant, moisture and corrosion resistant, overload temperature 130 deg. c. roll size 9.15 meters. teflon tape, packing type-piece, elongation % 50-60, length of tape-9 mtr, application of colour tape white al foil tape, color-sever, type-aluminium foil tape 2 inch, cello tape type single sided, tape dispenser type-high bond, self adhesive, cello tape roll size-15 meters waste cotton doth emery paper, grit size grit 40-60, material emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel. roll length-40 inch. emery paper, grit size-grit 220-400, material-emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel roll length 280 mn trubble gum, strong glue trap, type- glue board, container type-sachet, protection against-rats titanium putty, 1 kg 1.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 200 2.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 100 4 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 10 1.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 200 2.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 20

State Government

CTN :45490699

18 Jun, 2026 3.35 Lacs

Midnapore - West Bengal

Tender For operation and maintenance of rising main and delivery main pipe line (ci/di/hdpe/upvc) with all related structure of pitanow w/s scheme within gopiballavpur sub-division, under jhargram division phe dte. (for 12 months).

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

State Government

CTN :45490623

19 Jun, 2026 1.51 Lacs

Jhargram - West Bengal

Tender For maintenance of rising main, delivery main pipe line ci di hdpe upvc, f.h.t.c all related structure of 5 nos mini pipe water supply scheme out of 269 nos mini pwss of nayagram block within jhargram sub-division under jhargram division, phe dte.

State Government

CTN :45488922

25 Jun, 2026 NA

Kolkata - West Bengal

Tender For sdi of submersible pm with necessary allied works at newly sunk tubewell and laying of upvc pipe line at sarat chandra chattopadhyay government medical college and hospital, formerly known as uluberia s.d. hospital, howrah under ed phed

State Government

CTN :45475453

10 Jun, 2026 3.00 Lacs

Kota - Rajasthan

Tender For supply of sanitary and joinery items to government quarters located in civil lines. - wire nails, coarse sand (zone iii), fine sand (zone iv), portland cement, oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges75x47x1.70 mm, chromium plated brass handles 125 mm with plate 175 x32 mm, chromium plated brass handles 100 mm with plate 150 x 32 mm, stainless steel butt hinges 125x64x1.9 mm is : 12817 marked, stainless steel butt hinges 100x58x1.9 mm is : 12817 marked, stainless steel butt hinges 75x47x1.8 mm is : 12817 marked, stainless steel butt hinges 50x37x1.5 mm is : 12817 marked, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel door latch 300x20x6 mm, oxidised mild steel door latch 250x20x6 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, glue, ms hold fast, white cement based putty, g.i. limpet washer, bitumen washer, g.i. plain washer thick, c.i. grating 100x100 mm, indian type white glazed vitreous china ist quality w.c. orissa pan size 580x440mm., brackets, low level flushing cistern of 10 litres capacity : pvc with pvc bend as per is : 7231, m.s. clamps, european type white glazed vitreous china ist quality w.c. pan, wvc (10 litres) low level flushing cistern cover only., g.i. tees (equal) 25 mm, g.i. union 15 mm nominal bore, vitreous china flat back wash basin size 510 mm x 440 mm, c.p. brass waste coupling 32 mm, magenatic catcher double strip horizontal type., mortice lock of approved make godrej or equivalent with pair of cp handles, almirah lock of approved make godrej or equivalent, ss waste coupling 125 mm, p.v.c waste pipe with c.p nut 32 mm, p.v.c waste pipe with pvc nut 32 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm)., hydraulic door closer bottle type m.s. body with necessary accessories and screws complete, 6 mm thick commercial ply, 9 mm thick commercial ply, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, flexible (coil shaped) pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 75 mm dia., u-pvc pipes (working pressure 4 kg / cm^2) single socketed pipe 110 mm dia., upvc coupler for upvc drainage pipes 75 mm, upvc coupler for upvc drainage pipes 110 mm, upvc bend 87.5o 75 mm bend, upvc bend 87.5o 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass angle valve 15 mm, 15 mm ptmt bib cock, p.t.m.t. bib cock with nozzle 15mm, 15 mm ptmt bib cock long body with flange, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt ball cock 15mm complete with epoxy coated aluminium road & h.d. ball, ist qulality mat and glossy finished ceramic tiles size : 300mm x 450mm, ist quality heavy duty vitrified polished digital tile size:600mmx600 mm, ceramic mat finished tiles ist quality size 300 mm x 300 mm in white, gray, ivory, fume red brown, light green, light blue and other light shades, 15 mm nominal bore and 30 cm length pvc connection pipe with p.t.m.t. nuts, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, stainless steel screws 50 mm, stainless steel screws 40 mm, stainless steel screws 30 mm, stainless steel screws 20 mm, premium quality water closet seat cover solid pvc (isi marked) grade-i white for ewc, premium quality low level flushing cistern of 10 litres capacity pvc with pvc bend as per is : 7231, hydraulic seat cover for europeon wc, premium quality two way bib cock with wall flange, tooth paste & brush holder c.p. brass (heavy and superior quality.), stainless steel kitchen s

State Government

CTN :45487865

23 Jun, 2026 1.67 Lacs

Dediapada - Gujarat

Tender For providing, supplying and laying of upvc pipe of 15 mm and 25 mm dia. & construction of supporting platform for hdpe tank and providing and supplying of hdpe rectangular 500 ltr/capacity tank for 8 nos ta.dediapada, sagbara, garudeshwar district : narmada

By Cities

By States

By Agencies

By Ownerships

By Sectors