Pumps And Motor And Compressors Tenders

State Government

CTN :45596950

08 Jul, 2026 NA

Delhi - Delhi

Tender For supply of title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , drinking water coolers (v4) isi marked to is 1475 (q2) , automatic line voltage correctors (step type) for domestic use (stabilizer) conforming to is 8448 (q2) srtc of 50lph ro with following specifications: 1) capacity: 50 lph suitable ro membrane for input tds 2) booster pumps: dual pump (copper winding) 3) input tds: minimum 4000 ppm 4) pre-filtration: 20 pp sediment filter activated carbon filter 5) post-treatment: * uv (8 11w) * tds controller / mineral cartridge ensures maintenance for daily users. 1 year warranty with trusted service comes with a comprehensive 1-year warranty backed reliable service network., supply & installation of extension board/switch board of 16 amp. 3 socket outlets with switch with incomer mcb for connection of ro and water cooler complete as required, supplying, installation, testing and commissioning of air cooled hi wall split type air conditioners complete with indoor unit(idu), outdoor unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant, wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. the system shall be able to deliver 100% of the rated capacity upto 42 0c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply: * /bid number : gem/2026/b/7677973 + /dated: 17-06-2026 ' ' / bid document 1 / 18

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45609233

09 Jul, 2026 50.00 Lacs

Hyderabad-T - Telangana

Tender For supply of cpvc pipe 1and half inch , cpvc pipe 2 inch , cpvc pipe half inch , cpvc coupling 1and half inch , cpvc coupling 2 inch , cpvc tee half inch , cpvc elbow half inch , tap connections and fittings , 2000 liters ss tank , 3hp feed transfer pump , starter with timer or sensor , laying and installation charges for pipes fittings and tank

Corporations/Associations/Others

CTN :45607473

29 Jun, 2026 3.63 Lacs

Sirsi - Karnataka

Tender For work to repair the cubicle structure in the yard of the electrical transformers located in marigadde, addalli, amanagudda, khb colony and kendre pump houses of the water supply department and construct sheds for the protection of the said electrical transformers from rainwater.

State Government

CTN :45586306

22 Jun, 2026 NA

Katol - Maharashtra

Tender For supply of electrical and water supply material for gp paradsinga foryear 2026-27 3rd call - materiyal list water and electric, pvc pipe 4kg 63 mm, pvc pipe 4kg 75 mm, pvc pipe 4kg 90 mm, pvc pipe 4kg 110 mm, pvc pipe 4kg 140 mm, pvc pipe 4kg 160 mm, pvc pipe 6kg 63 mm, pvc pipe 6kg 75 mm, pvc pipe 6kg 90 mm, pvc pipe 6kg 110 mm, pvc pipe 6kg 140 mm, pvc pipe 6kg 160 mm, pvc pipe 10kg 63 mm, pvc pipe 10kg 75 mm, pvc pipe 10kg 90 mm, pvc pipe 10kg 110 mm, pvc pipe 10kg 140 mm, pvc pipe 10kg 160 mm, bleaching powder 25 kg bag, gi pipe 1/2", gi pipe 3/4", gi pipe 1", gi pipe 2", gi pipe 2 1/2", gi pip 3", gi pipe 4", pvc cappling 4kg 1/2", pvc cappling 4kg 3/4", pvc cappling 4kg 1", pvc cappling 4kg 2", pvc cappling 4kg 2 1/2", pvc cappling 4kg 3", pvc cappling 4kg 4", pvc cappling 4kg 5", pvc cappling 4kg 6", pvc cappling 6kg 1/2", pvc cappling 6kg 3/4", pvc cappling 6kg 1", pvc cappling 6kg 2", pvc cappling 6kg 2 1/2", pvc cappling 6kg 3", pvc cappling 6kg 4", pvc cappling 6kg 5", pvc cappling 6kg 6", pvc cappling 10kg 4", pvc cappling 10kg 5", pvc cappling 10kg 6", gi cappling 1/2", gi cappling 3/4", gi cappling 1", gi cappling 2", gi cappling 2 1/2", gi cappling 3", gi cappling 4", pvc elbo 6kg 1/2", pvc elbo 6kg 3/4", pvc elbo 6kg 1", pvc elbo 6kg 2", pvc elbo 6kg 2.5", pvc elbo 6kg 3", pvc elbo 6kg 4", pvc elbo 6kg 5", pvc elbo 6kg 6", gi bend 1/2", gi bend 1", gi bend 2", gi bend 2.5", gi bend 3", gi bend 4", gi bend 3/4", pvc bend 4kg 5", pvc bend 4kg 6", pvc bend 4kg 1/2", pvc bend 4kg 3/4", pvc bend 4kg 1", pvc bend 4kg 2", pvc bend 4kg 2 1/2", pvc bend 4kg 3", pvc bend 4kg 4", pvc bend 6kg 2 1/2", pvc bend 6kg 3", pvc bend 6kg 4", pvc bend 6kg 5", pvc bend 6kg 6", pvc tee 4kg 1/2", pvc tee 4kg 3/4", pvc tee 4kg 1", pvc tee 4kg 2", pvc tee 4kg 2.5", pvc tee 4kg 3", pvc tee 4kg 4", pvc tee 4kg 5", pvc tee 4kg 6", pvc tee 6kg 2.5", pvc tee 6kg 3", pvc tee 6kg 4", pvc tee 6kg 5", pvc tee 6kg 6", gi tee 1/2", gi tee 3/4", gi tee 1", gi tee 2", gi tee 2.5", gi tee 3", gi tee 4", pvc end cap 1/2", pvc end cap 3/4", pvc end cap 1", pvc end cap 2", pvc end cap 2.5", pvc end cap 3", pvc end cap 4", pvc end cap 5", pvc end cap 6", gi end cap 1/2", gi end cap 3/4", gi end cap 1", gi end cap 2", gi end cap 2.5", gi end cap 3", gi end cap 4", pvc mta 1/2", pvc mta 3/4", pvc mta 1", pvc mta 2", pvc mta 2.5", pvc mta 3", pvc mta 4", pvc mta 5", pvc mta 6", pvc pta 1/2", pvc pta 3/4", pvc pta 1", pvc pta 2", pvc pta 2.5", pvc pta 3", pvc pta 4", pvc pta 5", pvc pta 6", saidal piece 2"x1/2", saidal piece 2.5"x1/2", saidal piece 3"x1/2", saidal piece 4"x1/2", saidal piece 5"x1/2", saidal piece 6"x1/2", saidal piece 2"x3/4", saidal piece 2.5"x3/4", saidalpiece 3"x3/4", saidal piece 4"x3/4", saidal piece 5"x3/4", saidal piece 6"x3/4", gi sulisevalue 2", gi sulisevalue 2 1/2", gi sulisevalue 3", gi sulisevalue 4", gi sulisevalue 5", gi sulisevalue 6", flang gi 2", flang gi 2 1/2", flang gi 3", flang gi 4", flang gi 5", flang gi 6", air value 2", air value 2.5", air value 3 ", air value 4 ", air value 5 ", air value 6", pvc reducer 1/2" x 3/4", pvc reducer 3/4" x 1", pvc reducer 2" x 2 1/2", pvc reducer 2 1/2" x 3", pvc reducer 3" x 4", pvc reducer 4" x 5", pvc reducer 5" x 6", gi reducer 1/2" x 3/4", gi reducer 3/4" x 1", gi reducer 2" x 2 1/2", gi reducer 2 1/2" x 3", gi reducer 3" x 4", gi reducer 4" x 5", gi reducer 5" x 6", p.v.c. valve 2", p.v.c. valve 2 1/2", p.v.c. valve 3", p.v.c. valve 4", open well submarsible pump 10 hp, open well submarsible pump 7.5 hp, open well submarsible pump 5 hp, open well submarsible pump 3 hp, bore well submarsible pump 3 hp, bore well submarsible pump 10 hp, bore well submarsible pump 7.5 hp, bore well submarsible pump 7.5 hp, bore well submarsible pump 12.5 hp, bore well submarsible pump 15 hp, starter ltlk 5 hp, starter ltlk 15 hp, starter ltlk 7.5 hp, ltlk star delta motor starter 10 hp, ltlk star delta motor starter 12.5 hp, cable submersible 2.5 mm copper, cable submersible 4 mm copper, cable subme

State Government

CTN :45607047

26 Jun, 2026 4.04 Lacs

Mahendragarh-Hr - Haryana

Tender For repair of pumping machinery of various tubewells water works boosting stations for village karira bharaf and chelawas year 2026 27

State Government

CTN :45607850

22 Jun, 2026 NA

Rohtak - Haryana

Tender For rohtak town annual maintenance works for water supply - pumping machinery - clear water pump , pump set 450 lpm 40 mtr head 7.5 hp / in campus of 3rd water works in rohtak town

State Government

CTN :45588786

19 Jun, 2026 NA

Kurukshetra - Haryana

Tender For ladwa town annual maintenance works for stp/sewage. - miscellaneous item / contractor profit 5% , one job / hiring of driver for sewer jetting machine for the month 11/2026

State Government

CTN :45588800

19 Jun, 2026 NA

Kurukshetra - Haryana

Tender For ladwa town annual maintenance works for stp/sewage. - miscellaneous item / contractor profit 5%, hiring of driver for sewer jetting machine for the month of 07/2026

State Government

CTN :45611771

24 Jun, 2026 5.35 Lacs

Ambala - Haryana

Tender For repair of pumping machinery of existing 12 nos. tube wells including submersible cable and starter and allother works contingent thereto

By Cities

By States

By Agencies

By Ownerships

By Sectors