Get complete information related to latest Refractories Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Refractories Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Refractories Tenders.
Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol
Tender For dry brick road kunwar pradhan house to pragyan international school in village rampur banger (jewer) ,yea wc-06 - name of work:-dry brick road kunwar pradhan house to pragyan international school in village rampur bangar (jewar)yea
Tender For providing and laying interlocking tiles dry bricks and c c road brick/rcc drain in village milak karimabad yeida.wc-06 - name of work:-providing and laying interlocking tiles dry bricks and c c road brick /rcc drain in village milak karimabad yeida
Tender For supply of refractory material - accoset-50 fire cement (alumina content above 45%) tata make isi/iso standard., castable refractory normal (alumina content above 45%) tata make isi/iso standard., castable refractory super (alumina content above 45%) tata make isi/iso standard., standard fire bricks(alumina content above 45%) 9" x 4 " x 3" isi/iso standard., special fire bricks as per drawing allumina content above 45%. isi/iso standard., hysil block h-800 size- 900 x 600 x 50mm. isi/iso standard.
Tender For package-04 wss sharian wala, chugga, baghu wala, block guruharsahai - name of scheme : dnit internal improvement works of cluster section no. 362-c (package no. 4) for water supply scheme sharin wala, chugga & baghu wala, (3 nos. schemes & 6 nos. villages) block guruharsahai, distt. ferozepur (under state share/jjm) -"1 nos. repair of existing 150 cum ohsr, 2 nos. repair of existing 50 cum ohsr, disinfection unit electrically based and construction of pump chamber 3.05 x 3.70m including gravil pit and construction of ihhl complete in all respects, 2 nos. repair of existing pump chamber 3.70 x 4.30 mtr., providing, laying, cutting, jointing & testing of upvc pipe (type-a) 6kg/cm2 for distribution. including cost of excavation, dismantling & relaying of dry brick on edge paving and dismantling of metalled road, cc flooring, dismantling of interlocking tiles with pcc base and restoration in original condition with interlocking tiles, house hold water connection with water meter & development of water works site etc. complete in all respect and all other works contgent there to". (completion period 6 month)
Tender For diamond cut off blade 450 mm (18 inch) diameter as per is: 10519 (latest), type-a or equivalent indian or european standard. the blade shall be suitable for chipper masonry saw for cutting refractory bricks of the following chemical composition:-alumina (al2o3)-70% min, iron oxide (fe2o3)-2.5% max., alkalis (na2o+k2o)-1.0% max. note: 1) the firm has to submit mtc alongwith the supply. 2) each blade shall serve for cutting of bricks required for minimum 30 ladles (15-20 bricks per ladle). full supplied quantityshall be accepted/ rejected based on shop floor trail of 01 blade. in case of lesser performance of trail blade, proportionate payment shall be made for the used trail blade.3) the firm has to submit guarantee for 30 ladles. in case of lesser performance after acceptance, the firm has to replace un used blades wihh in 30 days of receipt of oomplaint. 4) no bonus shall be paid for performance exceding 30 ladles. ]
Tender For supply of 02 x store shelter with all etc completed c c - mm 0 point 63 mm , pre coated galvanized plain steel sheet gi based of 600mm x 2460 mm 0 point 50mm , sunshade made of will be of pre painted galvalume aluminium zinc coating gi based plain steel sheet 0 point 63 mm , self driven power screw of 3mm in dia and 55mm long in built rubber washer and gi washer , pre painted steel doors of size 1 point 50 x 2 point 10m double leaf with angle iron frame 40x40x6mm with two cleats welded to the frame as door , pre painted steel window made out of 1 point 25 mm thick pressed steel frame as per drg, outer shutter of 4 mm , s for wind driven turbine air ventilator of 21inch dia made up of stainless steel , building metrial for fly ash oblique burnt clay bricks of size 230mm x 115mm x 75mm. bricks shall have crushing strength of not less than 75 kg , building metrial for cement bags opc 43 grade conforming to is8112 to 1989 packed in hdpe bag of 50 kg , building metrial for coarse sand conforming to is 383 1970 the sand shall be hard dense strong durable , building metrial for fine sand continue to see specification as per appendix , building metrial for graded stone aggregate of size 40 to 63mm continue to see specification as per appendix , building metrial for graded stone aggregate of size 40mm continue to see specification as per appendix , building metrial for graded stone aggregate of size 20mm continue to see specification as per appendix , building metrial for graded stone aggregate of size 12 point 5 mm continue to see specification as per appendix , hardware material for thinner continue to see specification as per appendix , hardware material for water proofing compound continue to see specification as per appendix , hardware material for plastic dividing strips of 38 mm wide and 1 point 5mm thick continue to see specification as per appendix , hardware material for red oxide zinc chromate continue to see specification as per appendix , hardware material for synthetic enamel paint continue to see specification as per appendix , hardware material for curtain rod of 20mm dia with 2 brackets and 12 nos of curtain rings compete for 1 point 50 mtr long with screws for fixing the brackets , hardware material for fire extinguisher 5 kg capacity with mounting brackets , electric material for led tube rod 4 feet x 20 w continue to see specification as per appendix , electric material for ceiling fan 1200mm sweep complete with electronic dimmer 450w , electric material for hook for hanging of ceiling fan , electric material for bulk head fitting complete with glass and led light 9 watt , electric material for ceiling rose 2 to 3 terminal , electric material for switch piano type 5 amps , electric material for 5 pin 15 amps switch socket combination with pvc mounting box , electric material for 5 pin 5 amps switch socket combination with pvc mounting box , electric material for mcb db spn 12 way , electric material for mcb dp 32 amps continue to see specification as per appendix , electric material for miniature circuit breaker mcb 6 amp to 32 amps , electric material for pvc switch mounting box 6inch x 8inch , electric material for exhaust fan 450mm with louvers , electric material for wire pvc insulated cable 1point 5sqmm multistranded copper conductor single core 1100v continue to see specification as per appendix , electric material for wire pvc insulated cable 2 point 5sqmm multistranded copper conductor single core 1100v continue to see specification as per appendix , electric material for cable pvc insulated aluminium solid conducter served with an inner sheathing of pvc tape armoured , electric material for pvc casing capping 20 mm size , electric material for pvc casing capping 25 mm size , electric material for 20mm dia pvc conduit pipe med grade , electric material for pvc tee //bid details 2 / 68 conduit pipe med grade , electric material for pvc tee 20mm casing capping , electric material for pvc tee 25mm casing cappin
Tender For call for all kind of road and building materials - cements isi marks 53 gread p. p. c., cements isi marks 53 gread o. p. c., cements isi marks 43 gread p. p. c., cements isi marks 43 gread o. p. c., pever block, pever block ruber coted 800mm, stell isi mark (8 mm ), stell isi mark (10 mm ), stell isi mark (12 mm ), stell isi mark (16 mm ), murum transport with roylti (locally availuble) p. i. 6%, metal crusher broken (quarry tested with royalty) 6 mm, metal crusher broken (quarry tested with royalty) 12 mm, metal crusher broken (quarry tested with royalty) 20 mm, metal crusher broken (quarry tested with royalty) 40 mm, metal hand broken (with royalty) 80 mm, ceramic tiles, d.s. type soil bricks (w. a. 30%), d.s. fly ash cement bricks, sand ( contend no. sit) specified, isi marks np-2 pipe 1000 mm (with collars), isi marks np-2 pipe 800 mm (with collars), isi marks np-2 pipe 600 mm (with collars), isi marks np-2 pipe 450 mm (with collars), isi marks np-2 pipe 300 mm (with collars), ciment cheair, mixture machine rent, oil pent, sus vall water supply isi mark 90 mm, rolar machine, water tankar, bituman vg 30, bituman vg 40, sintax isi mark 3 & 4 lear coat, ciment dustbin standerd size 3 x3.25, profile sheet 5 mm (size 3.5 x 12 fit), stell angeles isi mark (10 mm ), pvc pipe isi marks 4kg (75mm), pvc pipe isi marks 6kg (90mm), pvc pipe isi marks 6kg (110mm), gi pipe isi marks 75mm, gi pipe isi marks 90mm, pvc pipe isi marks 4kg (50mm), centring