Tender For providing of custom bid for services - laying plb pipe/ duct and associated works by hdd (trenchless technology) / open trench method, optical fibre cable pulling/blowing and splicing works etc., in amravati & nagpur bas for restoration of faulty bbnl incremental ofc to activate pending 4g sat
Tender For provision of new led street lights with allied accessories on existing poles at various dark spots in saidulajab ward no 160 under south zone - led street light fixture, powder coated pressure die cast aluminium body (system lumen efficacy >135 lm/watt). supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, frequency 50/60 hz, operating temp range -5 0c to 50 0c, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driver efficiency >85%,thd 10% as per iec 61000-3-2, p. f. 0.95, ip-66,ik-10, cri >70, under voltage and over voltage protection, emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitary) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation color matching)5, maximum power consumption should not more than the specified rating and fixture shallbe of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductorsingle core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 testreport and all testing required for led fixturesas per bis shall be submitted.. shape size and cct shall be as approved by engineer-in-charge asper requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). 45 watt , supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm
Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt
Tender For providing and fixing of cable and other electric parts at various pump house. - supply of xlpe insulated power cable (conformingis-7098) 1100 volt grade/heavy duty power cable conforming to is1554-1100 volts grade, 2core/3 core/4 core isi marked with alu. stranded /solid conductor armoured 4 core uadd sor no. 14.1.8/p-79, 50 sq.mm(xlpe), 70 sq.mm(xlpe), supplying of isi marked change over switches in sheet encloser confirming to is:4064/ is:13947 (part i & iii) with side handle operated 4 pole with two earthing terminals 7.3/p-36, 100 amps. 415/500 volts.(on load ), 200 amps. 415/500 volts.( off load ), supplying of isi marked and approvedmake of moulded case circuit breaker (mccb) suitable for 3 phase, 3 pole, 50hz, 415 volts, ac supply with respective interrupting capacity (ka) at 415 volts cited against their range standard conforming to is - 88288/p-40, mccb with breaking capacity 35 ka at 415 v current rating 160 amps & adjustable : 70% - 100% thermal & 5-10 times magnetic setting 8.2.1, mccb with breaking capacity 50 ka at 415 v current rating - 400 amps & adjustable : 70% - 100% thermal & 4-10 times magnetic setting, supplying and laying of submersible flat cable isi marked 3 core copper wire of suitable size with proper clamping of approved make.10.0 sq.mm multi strand 11.5/p-165mpphed sor 1st sep. 2023
Tender For supply installation testing and commissioning of lt cables along with necessary excavation laying of dwc pipes fixing replacement of junction boxes with required accessories and allied works for street light poles at various locations across the vnit
Tender For corrigendum : supply and installation of telecom and scada equipments for extending data connectivity to upcoming cgd hookups and lmc connectivity in southern region on annual rate contract basis - supply items under arc for telecom system, supply of mpls tp equipment, supply of ip/mpls type switch, supply of converter, ac-dc (230 v ac to 48 v dc), ac-dc (230 v ac to 24 v dc), dc-dc (48 v dc to 24 v dc), dc-dc (24 v dc to 48 v dc), supply of battery charger with battery backup, supply of porta cabin, supply of lct, supply of equipment racks, supply of solar panel with battery back up 300 w, supply of solar panel with battery back up 200 w, supply of solar panel with battery back up 50 w, supply of explosion proof telephone, supply of weatherproof telephone, supply of acoustic half hood booth, supply of multi-paired armoured cable (10 pair), supply of 6 twisted pair, 1.5 sq. mm ( 12 core ), individual pair andoverall aluminium mylar tape shielded with drain wire, supply of 6 twisted pair, 0.50 sq. mm ( 12 core ) individual pair and overall aluminium mylar tape shielded with drain wire, supply of telemetry interface cabinet (tic), supply of analog phones, supply of fxo gateway, supply of fxs gateway, supply of ethernet switch, supply of rtu, supply of mini rtu, supply of ftc, supply of joint closures, supply of ip camera, supply of spares for telecom, supply of spares for rtu, supply of ethernet to serial converter, supply of optical to serial convereter, supply of rs 232 to rs 422/rs485 converter, supply of optical to ethernet converter, supply of out door equipment panel, supply of field mounted enclosure conforming ip-66, supply of gprs modem, supply of atex switch 8 port, supply of 24f ofc cable, supply of rtu management licenses for makes like husky, schneider, etc, telecom system (works), installation of mpls/tp equipment, integration of mpls/tp equipment with existing nms, installation and commissioning of solar system, installation of porta cabin, laying and termination of multi-paired armoured cable (10 pair), installation and configuration of converter/switch and interfacing of same with flow computer and integration with scada system, installation of tic panel, design, engineering and submission of documents, testing of ofc and submission of reports, earthing works, installation testing & commissioning of instrumentation cable, installation commissioning and integration of rtus in existing scada server, installation commissioning and integration of mini rtus in existing scada server, installation and integration of ip cameras in existing server for each cameras, installation of gprs modems if supplied as free issue, extending of leased lines for 1000 km distance including modems (one ethernet interface & one e1 interface for lan) at both ends, rectification of ofc including supply of joint pit with identification of fault and testing of of cable, installation of outdoor panel, transportation charges for free issue material (per km rate to be quoted), laying of ofc through hdd method, laying of ofc through direct trench method, point to point radio communication (2.4/5.8 ghz licence free ism band), laying of ofc cable ( if ofc supplied as free issue by gail), blowing of ofc in duct, manday charges [post-installation manday charges for rtu/telecom works on an on-call basis, including troubleshooting, system calibration, software updates, configuration adjustments, and performance optimization. ], total amount excluding gst, gst (cgst&sgst/utgst or igst) in percentage (%) on net total amount
Tender For bid to ras bid to ras supply of fabrication and construction of copper plate earthing details of electrodes and earth pit at akashvani rampur, uttar pradesh , interconnecting earth electrodes with providing, fabrication and fixing of 50mmx3mm copper strip at akashvani rampur, uttar pradesh , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at air rampur , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at akashvani rampur. , providing and fixing of nomenclature sign marker for earth pits at akashvani rampur, uttar pradesh , digging of trenches of size 450mmx600mm total length 118mtr for 185 sq mm 3.5core and starting from electricity board energy meter to lt panel inside room and to respectively by digging the path , providing and grouting of 2 nos. of 3inch dia g.i pipes of different length on the cement concrete flooring and along the vertical walls. total length of both pipes is 27 mtr. , providing, grouting and fixing 2 nos. of 4inch dia g.i pipes along the ms stand of main mccb at energy meter. total length of both pipes is 14 mtr. , unwinding roll of 185 sq mm 3.5core al. cable from the cable drum and laying 2 length of this power cable through the trenches and through the gi pipes as laid down at akashvani rampur , reconstructing the cc flooring and repairing the area with cement concrete and stone aggregate mixer and finishing the surface, complete in all respect at akashvani rampur , providing and fixing of lt cable route marker made up of 2.5inch dia signage with 10mm x 2ft long ms rod at akashvani rampur, uttar pradesh fabrication and construction of copper plate earthing details ) /bid number : gem/2026/b/7445375 * /dated: 24-04-2026 & & / bid document 1 / 22
Tender For tenderization for annual rate contract work of laying testing & commissioning of 11/22 kv ug xlpe cable with 11/22 kv cable end termination & st joint kits (to be supplies by agency) along with erection of ht,lt & tc , maintenance works under cfc and if required any other sdn under jurisdiction of sachin division under nd and if required any other scheme.