Two And Three Wheelers Tenders

Central Government/Public Sector

CTN :42409977

17 Dec, 2025 NA

Chakan - Maharashtra

Tender For corrigendum : supply of arai-c2-a - multichannel cell cycler with climatic chamber , icat-c2-b - cell tester - 72 channels , garc_ c2_ c cell cycler with thermal chamber , garc_ c2_ d battery cycler with thermal chamber , natrax_ c2_ e cell cyclers with multiple channels

CTN :41275183

13 Dec, 2025 2.30 Crore

Shillong - Meghalaya

Tender For bid to ras providing of custom bid for services - e-scooter hiring service

CTN :42755398

11 Dec, 2025 5.00 Lacs

Dholpur - Rajasthan

Tender For bid to ras supply of bicycle with safety and performance requirements conforming to is 10613

State Government

CTN :42577549

15 Dec, 2025 8.62 Lacs

Rewa - Madhya Pradesh

Tender For corrigendum : procurement of testing equipment for all power houses at thc sirmour - digital insulation testers (megger)range: 0-100/250/500/1000v, digital insulation testers (megger)range: 0-100/250/500/5000v, digital multimeterfeatures:dc & ac voltage; ac & dc current; continuity & resistance ; capacitance and inductance; checking of diodes/ transistors, single phase variable voltage autotransformers: details of single phase auto transformer 15a rating -input: 220v ac 10%; output: 0 to 270 volts.rating: 15 amps, three phase variable voltage autotransformers: details of three phase auto transformer 15a rating -input: 415v ac 10%; output: 0 to 500 volts, 3 phases.rating: 15 amps., tong tester cum multi meter (digital) (clamp on meter for ac measurements) specification for 0-1000a ac digital tong tester (clamp on meter) - current range: 0 to 1000 a (with settings of 1/10/20/40/100 a/500a/1000a auto ranging); voltage range: 0 to 60/300/600 v ac; accuracy: 0.3% or better, tong tester cum multi meter (digital) (clamp on meter for dc measurements) specification for 0-300a dc digital tong tester (clamp on meter) - current range: 0 to 300a (with settings of 1/10/20/50/100 a/300a auto ranging) ; voltage range: 0 to 60/120/300 v dc.accuracy: 0.3% or better., tong tester cum multi meter (digital) (clamp on meter for ac/dc measurements) specification for 0-100a ac digital tong tester (clamp on meter) - current range: 0 to 100 a (with settings of 00-20ma/100ma/500ma/1a/10a/50a/100a auto ranging); voltage range: 0 to 60/300/600 v ac; accuracy: 0.3% or better, digital phase sequence indicator: dial size: 96x96mm (minimum) ; working voltage: 50 to 500v ac; frequency: 25 to 60 cycles., digital earth resistance clamp meter with leakage current measurement

CTN :42901834

24 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For corrigendum : purchase of equipments - purchase of equipment, 1. configuration design an 8-channel battery analyzer and its accessories 2. power 425 w3. voltage measuring range: 25 mv to 5 v, discharge minimum voltage: 0v or better, accuracy: 0.05% of fs4. current range: 0.5 ma to 6 a, accuracy: 0.05% of fs or better 5. power per channel output power: 30w, stability; +/- 0.1% of fs or better6. time rise time: 1ms (0~full range)7. frequency 10hz8. charge mode of operation: cc, cv, cccv, cp end conditions: voltage, current, relative time, capacity.9. discharge mode of operation: cc, cv, cp, cr, end conditions: voltage, current, test time, capacity, energy.10. pulse mode charge: cp mode, cc mode, discharge: cc mode, cp mode, min pulse width: 500ms, automated switch: automated switch from charge to discharge for each pulse end condition: voltage, relative time11. dcir support for the calculation of the point of the dcir12. cycle cycles: 1 65500 or better, steps: 250 or better, nested function: max three levels of loops13. protective function software, power-down data protection, user-defined safety (upper and lower) tolerance of current, voltage, and delay time14. channel features independent pairs of closed loops for the constant current source and constant-voltage source15. test reports and curves for analysis different types of curves created by software based on user definition. (voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc.), data reports created by the software. comparison of the performance of the batteries tested in channels, both visually and statistically16. channels independent control17. ac input ac 220v 10% / 50hz 18. voltage and current testing sample 4 wire connecting 19. noise 85db20. data management mysql database21. communication means tcp/ip protocol22. data output excel, txt23. communication interface ethernet port24. number of channels per cabinet 825. accessories: 1. bi-potentiostat: electrochemical workstation or moduletechniques the system should be capable of running the rde / rrde technique simultaneously cyclic voltammetry (cv) with simulation/fitting programs linear sweep voltammetry (lsv) with stripping bulk electrolysis with coulometry (be) differential pulse voltammetry (dpv) with stripping normal pulse voltammetry (npv) with stripping tafel plot (tafel), potentiodynamic deactivation, pitting corrosion, corrosion rate, linear polarization, corrosion current, etc. multi-current steps (istep) amperometric i-t curve (i-t) lifetime testing open circuit potential time (ocpt) chrono amperometry (ca) chrono coulometry (cc) chronopotentiometry with current ramp (cpcr) potentiometric stripping analysis (psa) auxiliary signal measurement channel ir compensation external potential input galvanostatic charge discharge single/multiple cycle -chrono potentiometry (cp) with potential limits, polarity by potential or time, no. of cycles etc. voltage vs current density curves single or multiple potential steps with charge limits, single or multiple current steps, mixed voltage/current control using macro. i-v measurements, i max, pmax, fill factor, etc.impedance ac impedance (imp) 10 hz to 3mhz impedance time (impt) (mott-schottky) impedance potential (impe) impedance simulator with fitting open circuit potential time (ocpt)hardware specification of bi-potentiostat workstation/ module: potentiostat / galvanostat module, 2- or 3- or 4-electrode configuration maximum potential: 10v, maximum current: 250 ma peak or better and 2 amps with +/-25 volts for higher current measurement. compliance voltage: > 13v or better, potentiostat rise time: 300 ns or better galvanostat applied current range: 3na to +/- 100ma or better and upto 2 amps applied current accuracy: 20 pa or better input bias current: 1 pa or better cv and lsv scan rate: 0.000001 to 10,000 v/s. ca and cc pulse width: 0.0001 to 1000 sec imp freque

CTN :42769342

10 Dec, 2025 2.53 Lacs

Midnapore - West Bengal

Tender For corrigendum : construction of cycle stand in the premises of office campus of the assistant director of agriculture,daspur ii block at tajpur mouja(jl no173) plot no535 at daspurii block in paschim medinipur district. - construction of cycle stand in the premisses of office campus of assistant director of agriculture daspur-ii block at tajpur mouza (jl no. 173, plot no. 535 at daspur-ii blockin the district of paschim medinipur under ada (admn) ghatal sub-division.

CTN :42268256

11 Dec, 2025 NA

Dehradun - Uttarakhand

Tender For bid to ras corrigendum : supply of tricycle or rickshaw for carrying goods (v2) (q3)

Central Government/Public Sector

CTN :42812900

12 Dec, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of universal dual block thermal cycler : : - universal dual block thermal cycler , nil1 , nil2 , nil3 , nil4 , nil5

CTN :43097873

18 Dec, 2025 NA

Mathura - Uttar Pradesh

Tender For supply of ordnance stores d d--pressure cooker 22 ltr complete, pressure cooker 12 ltr complete, tumbler stainless steel 600 ml, u.c 45 men set degchie 305 mm, bicycle atlas marks tp 24 gent black co

CTN :43095930

16 Dec, 2025 NA

Kollam - Kerala

Tender For supply of electric two wheeler - motorcycle, scooter and moped (q2)

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector