Water Storage And Supply Tenders

Central Government/Public Sector

CTN :40685211

04 Jul, 2025 NA

Dharwad - Karnataka

Tender For supply of compressor to receiver tank piping 3 inch , 20 cubic meters receiver tank , main header 8 inch , tapping point piping 4 inch , control valves isolation 8 inch , control valve or tapping point for endpoint 8 inch , control valve or tapping point for endpoint 4 inch , control valves for building isolation 1inch , control valve or tapping point for endpoint 1 inch , installation of pressure gauges 200 mm dia , installation of pressure gauges 100 mm dia , installation of air filter , installation of hf regulators for tapping points 4 inch , installation of hf regulators for tapping points 8 inch , installation of auto drain valves , installation of safety relief valve , installation of drain valves , tubing , vent valve , air filter , non return valve , ball valve , double stage regulator , point of use regulator single gauge , flash back arrester , flexible hose , smart leak gas detection system , the exhaust of flammable gases exhaust system , tube fittings , supports , consumable items + /bid number : gem/2025/b/6329606 , /dated: 12-06-2025 ( ( / bid document 1 / 30

Central Government / Public Sector

CTN :40709582

14 Jul, 2025 NA

Digboi - Assam

Tender For design, engineering, manufacturing, procurement of materials and bought out components, assembly at shop, inspection including inspection by tpia, testing at manufacturers works, packing, supply of dm water package

Central Government / Public Sector

CTN :40685457

26 Jun, 2025 24.49 Lacs

Panipat - Haryana

Tender For custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Central Government/Public Sector

CTN :40693575

24 Jun, 2025 5.99 Lacs

Imphal - Manipur

Tender For replacement of water storage tank in ty-ii, ty-iii, ty-iv and ty-v qtr of bn hq at mantripukhri

State Government

CTN :40696056

20 Jun, 2025 NA

Pune - Maharashtra

Tender For providing various material to gp valti - supplying and providing material, fruit toy set ph-8001, bird set, ph-8000 begetable tou set, farm animal set ph-1400, puzzle tray, bat ball set, anganwadi charts, sketch notebook, stand board, chappal stand, table glass, 5 ltr harpic can, 5 ltr handwash can, nail cutter, comb, mirror, carpet, 3 side handwash station, proteion powder childern, crayons colour box, hooks for school bags, samsung tab a7 lite (3/32gb ) t225 with syllabus, storage box, solar street light 24 watt led street light 60w panel 12ah battery 6 mtr pole with bracket transport, computer hp aio 12th gen.i3/8gb ram/500gb ssd/23.8 fhd, colour printer epson scan/copy print, water tank 1000 ltr, colour printer epson scan/copy/print, 3 side hanwash station, 16 ltr water filter

State Government

CTN :40691754

19 Jun, 2025 15.86 Lacs

South Tripura - Tripura

Tender For supplying and installation of polyethylene water storage tank at manu bazar gp, fulchari vc, south bhuratali gp,kalapania gp, satchand gp,under satchand r.d. block within the dws sub-division,sabroom during 2025-26.

Central Government/Public Sector

CTN :40698694

10 Jul, 2025 NA

Ajmer - Rajasthan

Tender For remove, refit, scraping, painting & hydraulic testing of auxiliary reservoir of air brake system of icf bg coaches demu/memu-tc coaches and lhb coaches in carriage workshop ajmer (as per scope of work)"

corporations/Associations/Others

CTN :40713307

03 Jul, 2025 28.45 Lacs

Chennai - Tamil Nadu

Tender For improvement works to ash water storage tank of unit i ii near ash handling plant at nctps i premises.

State Government

CTN :40708622

20 Jun, 2025 3.49 Lacs

Dinajpur - West Bengal

Tender For installation of small water distribution system with solar pump storage tank in the field at abdul jalil land at agapur sansad in bangalbari gram panchayat, hemtabad development block

State Government

CTN :40708623

20 Jun, 2025 3.49 Lacs

Dinajpur - West Bengal

Tender For installation of small water distribution system with solar pump storage tank in the field at nuri jame masjid at dakshin kotagaon sansad in bangalbari gram panchayat, hemtabad development block

By Cities

By States

By Agencies

By Ownerships

By Sectors