Latest ac pump Tenders | Government ac pump Tenders

State Government

CTN :45510739

19 Jun, 2026 NA

Parganas - West Bengal

Tender For repairing and overhauling of pump set no. 2 ( capacity- 270 m3/hr, head- 20 m, 980 rpm, make- wilo mather and platt, type cne 4 ac pump, model no-81268599/30/1 ) and allied works at raw water intake pumping station for 9mld wtp pujali

State Government

CTN :45519065

20 Jun, 2026 8.74 Lacs

Panisagar - Tripura

Tender For maintenance of rws/pdf/15 fc/other panchayat / deposit fund schemes in north tripura district during the year 2026-27/sh:- replacement and mtc of electrical accessories, pump motor etc in/c allied works of different sbdtw within the jurisdiction of jubarajnagar rd block under dws sub-division panisagar.

State Government

CTN :45519066

20 Jun, 2026 8.74 Lacs

Panisagar - Tripura

Tender For maintenance of rws/pdf/15 fc/other panchayat/ deposit fund schemes in north tripura district 2026-27/sh- replacement and maintenanceof electrical accessories, pump motor etc in/c allied works of different sbdtw of panisagar rd block of dws sub-division panisagar

CTN :45525946

22 Jun, 2026 3.39 Lacs

Murshidabad - West Bengal

Tender For service contract for maintenance of cpu, cpu isolating valves, cw, acw pump discharge and scs isolating butterfly valve and scs strainer during unit#4 oh

State Government

CTN :45496827

15 Jun, 2026 NA

Koradi - Maharashtra

Tender For modification work of 3.3 kv, 700kw vertical motor for auxiliary cooling water (acw) pump at 3x660 mw, ktps, koradi.

State Government

CTN :44942940

30 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : overhauling of one no cw and one no acw pum motor installed at pps-iii bawana - overhauling of cw pump motor, dismantling & refitting rotor cw motor, overhauling of cw motor, brg replacement de&nde cw motor, overhauling of acw pump motor, complete dismantling of 6.6kv 200kw acw, work on de/nde side bearing housing of 6, varnishing of stator and rotor 6.6kv 200, dynamic balancing of 6.6kv 200kw acw motor, providing and replacement of bearings 6.

State Government

CTN :45403198

17 Jun, 2026 9.70 Lacs

Dharmanagar - Tripura

Tender For corrigendum : rws/jjm in north tripura district of dws division dharmanagar 2026-27/sh- replacement, maintenance of electrical accessories, pump motor etc. in/c. lowering, lifting, allied works of different sbdtw of kadamtala block of dws sub-division, dharmanagar/gr.-i

State Government

CTN :45434604

11 Jun, 2026 1.36 Crore

Dharmanagar - Tripura

Tender For jjm scheme 2021-22/const. of innovative ws scheme at sarala based on existing cherra of kadamtala rd block/sh- providing, laying distribution pipeline, providing domestic connection etc. of dws sub-division, dharmanagar 2025-26/ gr-c (2nd call) - jjm scheme in north tripura district during the year 2021-22/ construction of innovative water supply scheme at sarala based on existing cherra (bamnia cherra) under kadamtala rd block / site development works, construction of aerator cum sedimentation tank (2.00 lakh gallon), hrf (2x1.5 lakh gallon /day) & ssf (2x1.5 lakh gallon /day), clear water reservoir (2.00 lakh gallon) with pump house & chlorination system , jack well (2 x 6.00 m od) with pump house & electrical accessories, pumping arrangement, boundary wall, toilet block, providing and laying distribution pipe line, providing domestic connection etc and other allied works / sh: providing and laying distribution pipe line, providing domestic connection etc. under dws sub-division, dharmanagar during the year 2025-26/ gr-c (2nd call).

State Government

CTN :45434608

11 Jun, 2026 1.41 Crore

Dharmanagar - Tripura

Tender For jjm scheme 2021-22/const. of innovative ws scheme at sarala based on existing cherra of kadamtala rd block/sh-providing, laying distribution pipe line, providing domestic connection etc. under dws sub-division, dharmanagar 2025-26/gr-d (2nd call) - jjm scheme in north tripura district during the year 2021-22/ construction of innovative water supply scheme at sarala based on existing cherra (bamnia cherra) under kadamtala rd block / site development works, construction of aerator cum sedimentation tank (2.00 lakh gallon), hrf (2x1.5 lakh gallon /day) & ssf (2x1.5 lakh gallon /day), clear water reservoir (2.00 lakh gallon) with pump house & chlorination system , jack well (2 x 6.00 m od) with pump house & electrical accessories, pumping arrangement, boundary wall, toilet block, providing and laying distribution pipe line, providing domestic connection etc and other allied works / sh: providing and laying distribution pipe line, providing domestic connection etc. under dws sub-division, dharmanagar during the year 2025-26/ gr-d (2nd call).

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

Ac Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors