Latest ac servo motor Tenders | Government ac servo motor Tenders

CTN :45448344

15 Jun, 2026 NA

Thiruvarur - Tamil Nadu

Tender For supply of servo amplifier module , servo amplifier alpha i ps 26-b , ac servo motor alpha i s4 5000-b , fanuc pc board with ic part no a02b-0303-c205 , fanuc separate detector interface unit , fanuc 8.4 lcd display , fanuc cable for 8.4 lcd display , fanuc machine operators panel , fanuc servo amplifier , fanuc fan adapter pcb

Central Government/Public Sector

CTN :45430687

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081581/ accnh /rcf 2-wc -081405 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0048. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45430688

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081432/ accnh /rcf 2-wc -081390 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0049. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45430689

16 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-wc-081505/ accnh /rcf 2-wc -081431 accnh/rcf 3-wc -081327 accnh/rcfnote : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/12/0050. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45388880

11 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For supply of item 1 yaskawa make sigma-7 series servo drive 400w; part no: sgd7s -2r8a00a , item 2 yaskawa make sigma-7 series servo drive 750w; part no: sgd7s- 5r5a00a , item 3 ac servo motor, type: sgm7j-08 a (750w, 200vac) along with su itable encoder cable and power , item 4 ac servo motor, type: sgm7j-04 a (400w, 200vac) along with su itable encoder cable and power

CTN :45384476

11 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45363431

12 Jun, 2026 NA

Sivaganga - Tamil Nadu

Tender For purchase of equipments ( s.no 1 to s.no 4 ) for mechanical department - purchase of equipments, slip gauge set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatness / parallelism: 0.5 mstored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes, dc motor type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 poleconstruction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly , bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end covers mounting: bench-mounted / frame-mounted unit, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm,0.8mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

Central Government/Public Sector

CTN :45351215

17 Jun, 2026 NA

Koraput - Odisha

Tender For supply of 20-235 -ac servo motor alpha is 8/4000hv, part no- a06b-236-b401 , 20-240-x-axis power cable, part no- lx660-8077-t267# l7r003

Central Government/Public Sector

CTN :45343198

02 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s scrap contain ferrous, copper, aluminum and pvc consisting, (1) rotary switch all size (16,63a etc), qty- 23 nos, (2) contactor all size (16,32a etc), qty- 30 nos, (3) led light fitting 18w/9w, qty-118 nos,(4) led light fitting b1, qty-110 nos, (5) led tube 9w, qty- 293 nos, (6) pcb for bldc fan 400 mm sweep, qty- 68 nos, (7) tail lamp fitting 110v, qty-07 nos, (8) return air filter 680 mm x 415mm, qty- 70 nos, (9) ac filters all size fresh & return air 620mmx 460 mm & 550mmx 500mm , qty-70 nos, (10) fresh air filters 480mm x 260mm, qty-120 nos (11) compressor scroll r22/r 407, qty- 20 nos, (12) led driver 9w & 18 w, qty-213 nos, (13) mcb & mpcb all size (6,16,32,63a etc). qty- 122 nos, (14) voltmeter 1000v/750v, qty-58 nos, (15) mmr 1000v, qty- 69 nos, (16) electronic thermostat 2-5 w, qty- 04 nos, (17) bldc fan 110 v dc, qty-170 nos (18) rmpu unit 7tr, qty- 02 nos, (19) mini pantry (hot case, 500w), qty- 16 nos, (20) mini pantry (deep freezer,25 ltr), qty- 16 nos, (21) condenser fan blade 21 inch/24 inch, qty-13 nos, (22) feeder contactor for lhb 1000a, qty- 03 nos,(23) contactor 200amp all, qty-22 nos, (24) regulated battery charger 6.5 kw, qty- 01 nos, (25) refrigerator 240/310 ltr, qty- 05 nos, (26) emergency battery charger 2.5 kw, qty-20 nos, (27) control transformer 100va 750v, qty- 40 nos, (28) control transformer 200va, qty- 19 nos, (29) control transformer 400va, qty-04 nos, (30) control transformer 300va, qty- 01 nos, (31) rc filter 415v, qty-24 nos, (32) control led driver pcb, qty-10 nos, (33) uic coupler 13 pin, qty- 43 nos, (34) heater unit complete, qty- 03 nos, (35) d.m plant, qty- 02 nos, (36) alternator 25 kw, qty-02 nos, (37) erru 25 kw, qty-02 nos, (38) 25 kva inverter, qty- 02 nos, (39) spare contactor coil 250v500 ac/dc, qty- 03 nos, (40) capillary 5 way, qty- 01 nos, (41) cfl 4 pin, qty- 50 nos, (42) deep freezer, 100/200 ltr, qty-01 nos, (43) condenser motor 3 ph 415v, qty- 10 nos, (44) mono block pump 3 ph 415v, qty-10 nos, (45) cooling coil lhb, qty-04 nos, (46) condenser coil lhb, qty-04 nos, (47) contactor k44 200a, qty-33 nos, total qty-11720 kg(11.720mt), location- coaching depot indore. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted, custodian- sse-ac-tl-indb, fdp-50 days. note- original e-waste certificate cum passbook will be required at the time of delivery.

CTN :45326580

09 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of instrumentation and control engineering practices (equipment) - motorized control valve trainer kit signal input:4 20 ma or 0 5 v valve characteristic:equal percentage stem movement:maximum 10 mm or 12 mm body material:cast iron trim material:ss 316 trim size: cv value:2 or 5 actuator:servo motor supply voltage:230 v ac, 50 hz connection: flanged or screwed type. digital indicator provided potentiometer provided for varying the 4 20 ma input signal, saybolt viscometer apparatus glass type: high-quality borosilicate glass tube. control type: manual energy regulator control. shape: rectangular bath with cylindrical test chamber. temperature range: ambient to 240 c oil bath temperature. humidity: up to 80% rh (non-condensing). power supply: 230 v ac, 50 hz. measuring range: 32 to 1000 sus(saybolt universal seconds). accuracy: as per astm d-88( 0.2 seconds). mounting type:benchtop. capacity:one cup(approximately 60 ml). control mode:manual operation. port size:standard orifice sizeas per astm d-88. features:oil bath with heater,thermoregulator,insulated outer body,orifice,receiver flask, control valve trainer kit three pneumatic control valves provided with individual hand valves valve characteristics: i) quick opening ii) linear iii) equal percentage. valves connected in parallel configuration for comparative study. pneumatic operation with air supply connection. control valve assembly mounted on trainer panel. power supply: 230 v ac, 50 hz., water level measurement trainer kit using capacitive type transducer tabletop model with transparent acrylic tank of approximately 50 cm height. capacitive type level sensor for continuous level measurement. sensor output: (4 20)ma and/or (0 5)v with built-in signal conditioning. vertical pump for water circulation from sump to tank. flow control valve, overflow, and drainage arrangement. digital display for water level indication in cm. power supply: 230 v ac, 50 hz, single phase. in-built regulated dc power supply for sensor and control circuit. mounted on powder-coated ms frame for laboratory use. suitable for calibration and study of capacitive level measurement.

Ac Servo Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector