Latest accelerometer sensor Tenders | Government accelerometer sensor Tenders

CTN :41670276

09 Sep, 2025 17.14 Lacs

Jaipur - Rajasthan

Tender For supply and instalation of automated polyhouse 1008 square meter along with micro irrigation system and other required facilities

CTN :41668120

15 Sep, 2025 17.14 Lacs

Sawai Madhopur - Rajasthan

Tender For supply and installation of automated polyhouse 1008 square meter along with micro irrigation system and other required facilities for running of these facilities at centre of excellence flower sawai madhopur

Central Government/Public Sector

CTN :40492725

04 Sep, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of micro ohm meter

CTN :41626534

09 Sep, 2025 NA

Gurdaspur - Punjab

Tender For supply of micro servo , video trans meter , video receiver antena , flight controller , radio receiver , remote controller , camera

Central Government/Public Sector

CTN :41625633

11 Sep, 2025 NA

Mangalore - Karnataka

Tender For supply of chemicals & materials silver metal wire abt. 1mm , n-hexane pure, 99% , o-tolidine extrapure ar, exiplus, multi-compendial, 98% , potassium iodide pure, 99% , gallium (iii) nitrate hydrate extrapure, 99.9% , cesium nitrate extrapure, 99% , aluminium nitrate nonahydrate acs, 98.5% , dish, crystallizing, without spout , hot plate magnetic stirrer , condenser, liebig , flask round bottom, two necks (side neck at angle) , receiver adapter - plain bend , flask round bottom, single neck , beaker 1000ml , beaker 500ml , lanthanum nitrate hexahydrate reagent grade, 99% , chromium (iii) nitrate nonahydrate pure, 96% , ph meter , orthophosphoric acid extrapure, 85% , potassium iodide pure, 99% , n hexane , filter funnel, plain, short stem , powder funnel , thermo meter 0-110 , high vacuum silicon grease (vacuum grease) , flask round bottom, single neck , storage vail 5.0 ml , ptfe coated magnetic stirring bar 6x18mm , ptfe coated magnetic stirring bar 25mm , ptfe coated magnetic stirring bar 7x15mm , beaker 1000ml , beaker 500ml , flask, conical (erlenmeyer) graduated 250ml , volumetric flasks 250ml , measuring cylinder 500ml , burette, with straight bore glass key stopcock, 25ml , pipettes, graduated, mohr type, class b 25ml , burette, with screw type ptfe needle valve-50ml , filter funnels 75mm omsons , polyethylene glycol 20000 flakes , polyvinyl alcohol cold mw~85000-124000 , polyvinyl alcohol hot mw~13000-23000 , micro centrifuge tube, pp autoclavable, 2.0ml, 500/pk , centrifuge tube, conical bottom, 50ml, pp with screw cap (sterile) 500/pk , centrifuge tube, conical bottom, 15ml, pp with screw cap (non sterile) 500/pk , sterile disposable petriplates, polystyrene, optically clear, 90mm dia *15mm, individually packed , potassium permanganate emplura , carboxymethylcellulose sodium salt for analysis , microtips, pp autoclavable 2-200ul, 1000/pk , microtips pp autoclavable 200-1000ul, 500/pk , microtips pp autoclavable 0.2-10ul, 1000/pk , digital stop watch , sodium alginate , polyaniline emeraldine base

CTN :41289002

11 Sep, 2025 NA

Shillong - Meghalaya

Tender For corrigendum : supply of supply of consumables /implants /devices/accessories, on consignment basis for ctvs - ventilator, invasive pressure monitoring, iv drip sets, anticoagulation monitoring and airway consumables, bain circuit adultbased on mapleson "d" system, provided with a corrugated tube, expiratory valve and antistatic bag.should have co-axial modification of the basic "t"-piece system, developed to facilitate scavenging of waste gases.the process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube.lightweight anesthesia delivery system., bain circuit pediatricbased on mapleson "d" system, provided with a corrugated tube, expiratory valve and antistatic bag.should have co-axial modification of the basic "t"-piece system, developed to facilitate scavenging of waste gases.the process should include patient inspiring fresh gas from the outer reservoir tube and expiring into reservoir tube.lightweight anesthesia delivery system., corrugated tube connectorshould allow connection between all breathing circuits and the et tube connector.thecorrugatedtubeshouldbeexpandable.shouldallowmovementofbreathingcircuitatpatientend.should be made of medical grade pvc.should be compatible with ett and tracheostomy tube., micro aggregate blood filter for red cell transfusionfilter media should be 40 micron rated polyester screen media with uniform pore sizeshould have total filter surface area of 170 sq.cmshould have average capacity of filtering 10 units of blood., packed red cell & whole blood leucocyte reduction filters.bedside filtration of one & two unit of packed red blood cells or whole bloodshould have universal spike with microbiological recovery ventshould be with attached straight administration set/automatic self leveling drip chamberperformance should consistently average less than 2x105 residual leukocytes per unitred cell recovery should average greater than 90%.filter housing hold up volume should be 25ml for one unit filter and 35ml for two unit filterit should be single use, forced warming blanketshould be disposable and two layered; should consist of non woven propylene fabric for body warming. should be usable with forced air warming units. material should be latex free and should meet flammability standard 16 cpr 1610 for safety. the manufacturer must have all the below listed types of blankets and should quote the prices separately for separate blankets full body adult underbody adult with arm and head openings pediatric full body pediatric underbody blanket. should be compatible withcommon machines. should be ce certified, cuff inflator and pressure gauge itisusedtoinflate& preciselymonitorthecuffpressureofet tube, tracheostomy tube and lma cuff. reducetheriskofpressurenecrosisandmucosal ischemia theriskofaspirationcanbeavoidedeliminatestheuseofsyringestoinflate&deflatethecuffs. should have release valve to adjust the pressure. gaugecalibratedincmh2owiththedetachablelongconnecting tube. shouldhaveinflationbulbfortheinflationofthecuffshouldhavethehookatthebackoffitsintostandardrail.should have widely spaced scale markings with colour coded pressure ranges.ergonomiconehadoperation, intubation pillow reusable intubation pillow for head elevated laryngoscopy position (help) for airway management of obese &l arge framed patients. shouldbemadeupofdensefoam. shouldbesuppliedwithheadcradle shouldbevinylcovered shouldbecemarked, negative insipratory force meter should be disposable, compact, light weight & amp;single patient use negative inspiratory force meter to check the negative inspiratory force of the ventilated patients with the facility of memory indicator point ertore cord reset highest force achieved by the patient individually packed ready for use. shouldbe ,ce marked, capnography co2 sampling mask shouldhavetheprovisionforbreathtobreathmonitoringforboth nose & mouth should have the facility to deliver oxygen; allow sampling of exha

CTN :41508269

10 Sep, 2025 NA

Shahdol - Madhya Pradesh

Tender For supply of botany lab equipment - procurement of botany lab equipment, modular laboratory workstation (with sink, switches) specification steel/ iron made, total size 500sq feet, real time electrophoresis system, with power supply specificationvertical slab gel system polyacrylamide gel, craft s micro imaging system specificationimported camera eyepiece with computer or laptop connectivity with usb port, entomological dissecting microscope specificationlens 83 mm dia. eye-pieces 10x and 20x, donna- pattal making machine specificationfully automatic double die crank machine, raw material banana leaf, palash leaf, etc, 220v, 1hp motor, mild steel , imported e-learn interactive white boards specification75 inches 4k uhd touch screen led tv ultratouch display interactive flat panel monitor(3840 x 2160 pixels) , horizontal laminar flow specification4 2 2 (stainless steel body) 90 lt./per hepais 90 + 20 fpm noise level in very low, working fluorescent light, pcr teaching kit specificationtest efficient and easy to use, colony counter specification4 digit, microlit micropipette specificationmultichannel 8 channel fully auto removable, dahl digestion unit specificatonaluminium heating block and fumes extraction system, digestion of plant, soil sludge, food grams, processing 100 ml tubes, leaf area meter specificationfully automatic, portable water/soil kit specificationph mv conductivity, tds salinity, turbidity, d.o. and temp., magnetic stirrer with hot plate specification2 liters capacity, water bath rectangular specification16" 12" 4" 12 holes of 3" diameter, seed germinator specificationsingle chamber, suitable for conducting experiments on variety of seeds under different conditions of temp. and humidity. inner size 555 910 605 mm s.s. interior having 6 nos. adjustable shelves. tabular heaters are fitted. windowed front glass door outer inner full view acrylic door enabling to keep temp. and humidity level un-interrupted. full feature digital temp. controller cum indicator with voltmeter stainless steel with 14 trays., tissue culture rack specificationfitted with switches and 0-24 hrs. timer made of mild steel duly painted. rack size 48 21 (depth) is covered with thick ubreakableplexi-glass. each rack fitted with 4 fluorescent tubes and four bulbs. it is a unit with four shelf. each shelf with one u.v. tube for sterilization purpose., electronic balances digital specificationkea-210 200 gm 0.001 gm (1 mg) 80 mm , laboratory bod incubator specification12 cu.ft. 900 650 550mm s.s inner capacity 340 liter, fully automatic fume hood specification1500x750x2100mm, universal phase contrast cum dark field/bright field binocular research microscope specificationequipped with double slidder unit and condenser system which enables bright field, dark ground and phase contrast observation by a simple change over procedure. this microscope is designed latest phase techniques for most convenient observation of all colourless and transparent specimens and living bacteria etc. wihout staining. provides excellent contrast and a perfect flat image. coarse motion with universal locking device and highly sensitive fine focusing reading to 0.002 mm. supplied with imported slider phase contrast cum dark field equipment having phase annuls with abbe condenser and set of phase plates and provision for accurate centering. supplied with din standard optics, fluorescence microscope (imported-flurex) specificationepi-fluorescence arm with butyl in two/four (option) filters (uv, v, b, g) dichoric mirror and barrier filters. wf 10x/fov 20 mm (paired). objective plain achromatic objective 4x, 10x, 40x, 100x. fluorescence objective 4x, 10x, 40x, 100x. standard interference filters 1. b excitation (400-490 nm); 2. g excitation (510-550 nm). optional 1. uv excitation (300-400 nm); 2. v excitation (395-415 nm). transmitted tungsten halogen lamp. fluorescent sources 100 w mercury lamp. complete with instruction manual

State Government

CTN :41496185

08 Sep, 2025 7.77 Lacs

Palakkad - Kerala

Tender For corrigendum : kerala water authority funds deposit supply and installationof lab equipments for maintaining quality standards in various schemes under p h division palakkad - supply of lab equipments to various wss and rwss under p h division palakkad, od114374/2025-2026:supply and installation of jar test apparatus with the specifications are (1). number of stirres - 6 minimum, (2). rpm- 25 to 200 rpm or better, (3). capacity of single stirrer unit- 1 l, (4). control -digital control (digital timer & r.p.m counter), (5). stirrer paddle material (with appropriate corrosion protective coating) - stainless steel, (6). power single phase (220 - 240 volts), (7). illumination -fluorescent tube ; llumination should not contribute heat to the system, (8). warranty period -2 years. etc; complete., od114368/2025-2026:supply , installation and calibration of digital nephelo turbidity meter with the specifications are ; (1). range : 0 to i000ntu , (2). range selection : manual /automatic , (3). resolution : 0.1 ntu or better , (4). accuracy : +or- 3% or better, (5). calibration : 4 points minimum (manual/auto selection) , (6). light source : led/tungsten halogen lamp , (7). detector : photodiode , (8). display : lcd/led , (9). power : 230v +or- 10 % , 50 to 60hz, (10). accessories: matching test tubes(4 nos minimum ) and light shield, l000ntu solution 500 ml minimum, (11). instrument manual with specification details(hard copy) , (12). warranty : 2 years for the entire instrument etc ; complete., od114367/2025-2026:supply , installation and calibration of bench top ph meter with the specifications are (i). ph - range : 0.00 to 14.00 ph or better, resolution : 0.01or better, accuracy : +or- 0.02 ph or better, calibration points : 3 points minirnum, buffer options : : standard buffers (ii). mv - range : 0 to +or- l999mv, resolution : i mv or better, accuracy : + or - 1 mv or better (iii). temperature - 0.0 to 99 degree c or better, resolution : 0.1 degree c or better, accuracy : + 0.5 degree c or better (iv). electrode qpecification: single junction ,body-plastic /unbreakable, gel filled electrode atc probe and electrode stand should also be provided. (v). meter features - 1) lcd i led display, 2) dual display of ph or mv with temperature , 3) with auto buffer recognition, 4) off set/slope should be displayed , 5) power 230v +or - 10%, 6) buffer solutions 7 .0, 4.0, 9.2 ph (100m1 minimum) should be provided, 7) should provide all accessories for smooth functioning of the equipment, 8) hard copy of user manual with instrument specification, 9) warranty: 1 year for entire insruments etc; complete., od114377/2025-2026:supply of laboratory equipments including electronic weighing balances,etc. with 2 year warrenty including conveyance charges, od114750/2025-2026:supply and installation of digital conductivity meter 308 with the specifications are (i). conductivity - 1). range : 0.1 us to 100 ms (6 decadic ranges) , 2). accuracy : +or - 1% of fs + or - digit. 3). resolution : 0.001 micro.s (ii). tds - range : 0.1ppm to 100 ppt (6 decadic ranges ), accuracy : + or - 1% of fs (iii). temperature - temperature : 0 degree c to 100 degree c( auto / manual ), resolution : 0.1 degree c. , accuracy : + or - 0.2 degree c. etc; complete with 2 year warrenty, od114370/2025-2026:supply of buffer solution for ph 4 and ph 7(500ml bottle)

Central Government/Public Sector

CTN :41596971

16 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & nuts etc as req

CTN :41586458

16 Sep, 2025 NA

Hyderabad - Telangana

Tender For supply of safety ohm meter, model no: lr-201 , micro ohm meter, model no: lr-2065

Accelerometer Sensor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector