Tender For annual maintenance of gas crematorium equipment at mananthavadi municipality wayanad district proposed under 2025-26 annual plan. project no-1068 - civil work, od319315/2025-2026supply, replacement and servicing of automatic burner and fitting gas line., od319328/2025-2026cleaning of chimney surface, machinery repairing, removal of soot and rust, and applying primer with two coats of epoxy paint., od319385/2025-2026repairing damaged brickwork by removing broken bricks and replacing them with new bricks using cement mortar. the work also covers proper alignment,joint finishing, curing, and cleaning of the repaired area, complete as per direction of engineer-in-charge, od319413/2025-2026servicing and maintenance of the motor electrical system, such as inspection of wiring, terminals, switches and connections. it also covers tightening of loose connections, minor repairs, testiong for proper operation, and ensuring safe and smooth functioning of the motor., od319470/2025-2026reparing damaged or worn-out bed with 18 mm ss rod structures by alignment correction, replacement of defective parts if required, welding or fastening works, and ensuring proper strength and stability., od319499/2025-2026repairing of the gas valve system, such as cleaning , replacement of worn-out seals orcomponents if required, leak testing, and ensuring smooth and safe operation. the work shall be carried out as per safety norms., od319520/2025-2026removal of rust, scale, and old loose paint from equipment surface by wire brushing /scrapng, surface cleaning, application of suitable anti-corrosive primer, and finishing with two coats of approved paint. the work includes all materials, labour, tools and incidental charges required to complete., od319580/2025-2026comprehensive maintenance of the installed equipment for a period of one year, covering routine inspections,servicing, minor repairs,adjustments and ensuring continuous and safe operation. including survice of burner, blower, impeller and chimney. the rate includes labour, tools and incidental charges during the maintenanace period, excluding major replacements unless specified.
Tender For tender enquiry for supply and commissioning of gos system materials for the existing gos structure at kapl factory - supply and installation of 11 kv 400a gang operating switch (gos) with operating (03 no’s), supply and installation of 11 kv hg fuse unit (03 no’s), supply and installation of lightning arrester (03 no’s), supply and installation of coyote conductor with alkathine tube, supply and installation of lugs, pg clamps and hardware materials, 2000 kva & 1250 kva transformers rust removal and painting, 2000 kva & 1250 kva transformers bus duct painting, gos structure rust removal & painting, transformer, bus duct and cable input/out-going naming, supply of efficacy 11 kv earth discharge rod with copper cable 6, meters length frp insulated make:-kusuma
Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint
Tender For custom bid for services - works contract for spare output; works of spares output in txm, block-09, bhel., bhopal has to be carried out. the list of tentative works and technology hours per job, which is to be carried out are as below: -, 1.0 scope of work: following work is to be carried out:, a) opening of wooden case of incoming materials., b) removal of rust preventive for checking of machined components on 3d-cmm for spares output., c) removal of all incoming identifications on all the components for spares handing over., d) putting unique identification mark on all the loose spares with itching machine., e) application of rust preventive on machined components before handing over to warehouse., f) application of wrapper film on each component., g) checking of gear case on checking fixture, reassembly & numbering of gear case, h) numbering, painting & trp of suspension tube & components, i) cable crimping, j) axle cap miscc operations, k) miscc operations of armature fan and other components, 1) pinion locking arrangement for packing for various traction machines, m) drilling and cleaning of rivets.
Tender For uncoupling of barrel fittings with removal of sludge from barrels of btpn tank wagons containing black oil and cleaning of sludge/rust from btpgln wagons at wagon repair shop, w.c. rly., kota for a period of 24 months.
Tender For supply of electrical items - dr. beck epoxy gel coat red(with hardner 100ml), dr. beck thinner (usage for epoxy gel coat red) thinner coad 221, beljium makecrc contact cleaner, 500ml, 2.26electro., wd40 rust removal aerosol spray,420ml, steel grip make 3/4inch pvc insulation tape roll (6.5metres long)red, yellow, blue, green, black each 30 nos., 1 inch fibere glass tape roll,5metres, anabond bearing reatainer grade 412, anchor make: 5a,5 pin socket, anchor make 16a,combined switch and socket, anchor make: 32a,combined switch and socket, crompton make 20w 4ft, led tube light fitting, 230v, aster make 36w led street light fitting, aster make 72w led street light fitting, 36w led drive for street light fitting,output volt 48v dc, 900ma, make finolex/polycab: 2c x 1.5 sq.mm copper multi strand flexible cable, make finolex/polycab: 3c x 2.5 sq.mm copper multi strand flexible cable, make:elmex, high current terminal block bolt nut conector size:50sq mm, dowells make aluminium cable lugs16 sq.mm - 8mm, 25 sq.mm - 8mm, 35 sq.mm - 8mm, 50 sq.mm - 10mm, 70 sq.mm - 12mm, 95 sq.mm - 12mm, 150 sq.mm - 12mm, 185 sq.mm - 12mm, 240 sq.mm - 16mm, dowells make copper socket heavy duty25 sq.mm - 6mm, 50 sq.mm - 10mm, 2.5 sq.mm -round type, 1.5 sq.mm -fork type, 1.5 sq.mm -pin type, fibre glass copper wire multi core(tin coated2.5 sqmm, 4 sqmm, 25 sqmm, 4 mm fibre glass sleeve, 1mtr length, 6 mm fibre glass sleeve, 1mtr length, 8 mm fibre glass sleeve, 1mtr length, 10 mm fibre glass sleeve, 1mtr length, 12 mm fibre glass sleeve, 1mtr length, teknic make push button dia-22.5mmmetalic series mushroom stayput button red, press to lock,(head 40mm) cat no:2aml4, green colour, cat no: 2af3, red colour, cat no: 2af4, push button elementno element green, ordering code: s1, no element red, ordering code: s2, remote push button station with push button and element(1no+1nc ), teknic make - pilot lights with integral led dia-22.5 mmpilot lights with integral led 110v ac, collur red, ordering code: 3plbr4l110ac, pilot lights with integral led 110v ac, collur yallow, ordering code: 3plbr8l110ac, pilot lights with integral led 110v ac, collur blue, ordering code: 3plbr6l110ac, pilot lights with integral led 110v dc, collur red, ordering code: 3plbr4l110dc, pilot lights with integral led 110v dc, collur green, ordering code: 3plbr3l110dc, pilot lights with integral led 110v dc, collur orange, ordering code: 3plbr5l110dc, pilot lights with integral led 110v dc, collur blue ordering code: 3plbr6l110dc
Tender For supply of rust removal spray in 170 ml aerosol containers. make- wd 40 pidilite or similar [ warranty period: 30 months after the date of delivery ] ]