Latest acid transfer pump Tenders | Government acid transfer pump Tenders

Central Government / Public Sector

CTN :45448924

06 Jul, 2026 NA

Kamrup - Assam

Tender For corrigendum : supply of procurement of spares for acid transfer pumps installed in dm plant

Central Government/Public Sector

CTN :45693049

11 Jul, 2026 NA

Surendranagar - Gujarat

Tender For repair replacement and maint of ext water rising supply line dozing plants submersible pump sets centrifugal pump sets starter panels and cleaning of sump oh tanks with connected items at mil stn dhrangadhra

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

CTN :45632746

20 Jul, 2026 NA

Bokaro - Jharkhand

Tender For cat. no: 08805901010 acid transfer pump

CTN :45305462

24 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For corrigendum : supply of ecp bulk acid unloading pumps and bulk acid transfer pumps spares for regular and breakdown maintenance of the equipment in sd-i - casing o ring, neophrene, p.no.30 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange delivery,ci(is:210gr.fg260), p.no.29 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange suction, ci(is:210gr.fg260), p.no.28 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, coupling key, ss (6x6x630) p.no.27 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland plate studs, m8, p.no.26 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing studs, m12, p.no.25 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o-ring far end, (80x30)neoprene, p.no.24 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller gasket, viton, p.no.22 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, thrower, uhmwpe, p.no.21 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o ring (drive end), 90x3 neoprene, p.no.20 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil drain plug, zinc coated ms, p.no.19 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (far end), 30x42x10, p.no.18 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, housing support, ms (is:2062) ,p.no.17 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft, ss 431 ,p.no.14 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, breather, zinc coated m.s., p.no.13 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing mouting ring, ms (is:2062), p.no.10 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (drive end), 35x47x10, p.no.09 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (f e), ci(is:210gr.fg260), p.no.08 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland cover, ss-316, p.no.07 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (d e), ci(is:210gr.fg260), p.no.06 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing housing, ci(is:210gr.fg260)p.no.05 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft sleeve, hostelloy c, p.no.04 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, back plate, uhmwpe, p.no.03 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller, uhmwpe, p.no.02 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller casing, uhmwpe, p.no.01 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440

corporations/Associations/Others

CTN :45529466

20 Jun, 2026 24.94 Lacs

Surat - Gujarat

Tender For supply, installation, testing and commissioning of submerged centrifugal pump set with auto coupling & allied accessories for underground sump & esr of w/s scheme @ appareal park, sachin, gidc, surat.

Central Government/Public Sector

CTN :45565700

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For repair/maint to sluice valve , nrv, cleaning of ug sump and oh tank, centrifugal pump replacement, external water supply pipe line and accessories under ge(af) ta gwalior

Central Government/Public Sector

CTN :45233889

15 Jun, 2026 NA

Surendranagar - Gujarat

Tender For corrigendum : repair replacement and maintenance of external water rising supply line dozing plants submersible pump sets centrifugal pump sets starter panels and cleaning of sump oh tanks with connected items at mil stn dhrangadhra

CTN :45416327

16 Jun, 2026 11.00 Lacs

Payyanur - Kerala

Tender For supply of multi process control trainer setup for instrumentation engineering lab under mhrd scheme - purchase of multiprocess control trainer setup for instrumentation engineering lab under mhrd scheme - multiprocess control trainer set up, multiprocess control trainer set up - specifications:- setup must contain flow, pressure, level, temperature loops also derived loops like cascade and feedforward loops. temperature loop must be independent. setups consist of a circulating closed loop water plant or circulating water system including control valve, tanks, independent pumps and necessary valves including bypass valves and rotameters. using this we can be able to do flow control loop with pid,level control loop with pid,and pressure control pid, as independent experiments.the setup must include the following:1.one linear characteristics diaphragm operated control valve with 15mm stroke 1/2-inch size, type: high-capacity globe seat leakage class (as per ansi/fci 70.2).2.measuring tank with volumetric measurement scale and 1000mm level, in of 25 ltr capacity. sump tank min of 40 ltr capacity. all tanks made of ss304, with sight glass, and finished with mat steel finish.3.2 no s smart dp transmitter for flow and level measurement with hart protocol, display and keys integrated for calibration,0-1000mmh2o measurement range,0.01% accuracy, international iso certified ce approved make,24v supply,4-20ma output, loop powered.4,1nos of magnetic flowmeter with display and keys integrated for calibration,0-2000lph measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, international iso certified ce approved make,24v supply,4-20ma output to measure flow as a independent loop.5,. smart pressure transmitter and temperature transmitters with hart protocol, display and keys integrated for calibration, pressure transmitter 0-10bar measurement range, read out: 0 - 100%, 4-20ma lcd display,0.05% accuracy, temperature transmitter 0-250 rtd type international iso certified ce approved make,24v supply,4-20ma output, loop powered.6, pressure tank of 24 liters with necessary valves for pressure loop.7.1nos orifice plate (ss304) and assembly grade with flange 1/2-inch size for flow measurement.8.2 nos pumps 0.5hp, ss centrifugal pump, minimum 1-inch pipeline of ss or high-pressure withstanding plastic with plastic welding.9. rotameters 2nos 1 inch size flow: 200-2000 l/h,ss thread, clear acrylic type.10, plc control station with 4 analogue inputs and one analogue output with necessary digital inputs and outputs to operate all loops directly from panel side.plc must have ethernet connectivity with supported protocols profinet and modbus tcpip.11.required all pneumatic components to full fill the process loops such as fr,needle valves etc.12,i to p converter 4-20ma to 3-15psi with 1/4" process connection with proper copper copper tubing.13, loop including flow pid control, level pid control, pressure pid control, cascade control (level flow), ratio control (flow flow).14.all loops can be operated using a scada system and independent pushbutton control includes trend of all analogue signals and pid tuning. scada direct profinet connectivity to plc and computer with intel i5 processor, 8gb ddr3 ram,1tb sata hdd,licenced windows 11 professional.15, required a standalone software application that must be installed on pc in which it can used to control and monitor all the functions used in scada. the application must contain process parameter trend graph plot for to study about process loops.16.the whole system setup must be in ms powder coated standalone mobile table with lockable castor wheels. all the components used be industrial. copper tubing for air connection, pressure gauges 4inches 3nos, electrical wiring connection to be flexible for to connect field devices. panel with switches, indicator, test points with banana connectors as required, multistrand wire with proper insulated lugs, ferruling & neat wire dressing & clam

Central Government/Public Sector

CTN :45415812

24 Jun, 2026 48.00 Lacs

Hyderabad-T - Telangana

Tender For repairs/ replacement maintenance of centrifugal pump sets, submersible pumps, bore wells gi/ di/ ppr pipr line distribution system, borewells testing of water and cleaning of oht ug sump, starter, valves, fittings and connected allied work at cdm - name of work: repairs/ replacement and maintenance of centrifugal pump sets, submersible pumps, bore wells gi/ di/ ppr pipr line distribution system, borewells testing of water and cleaning of oht & ug sump, starter, valves, fittings and connected allied work at cdm area under age em i of ge(utility) secunderabad

Acid Transfer Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector