Get complete information related to latest Acoustic Panels Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Acoustic Panels Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Acoustic Panels Tenders.
Tender For supply, installation, testing & commissioning of da set 500kva (336kw), 750v, 3p hase diesel alternator set, cpcb-iv complaint for lhb power car (without power and cont rol panel) conforming to rdso/pe/spec/ac/0084-2008 rev-1, with rcf annex.-a and icf amendm ent-1 along with manual isolating switch as per edml-208, and remote monitoring system a s per mcf/rbl medts-0006, rev-0. the da set shall be with noise reduction features (withou t acousticpanels) as per spec. no. rdso/pe/ms/ac/0045-2008 rev-0, amdt-1 with rcf annex-c. [ warranty period: 30 months after the date of delivery ]
Tender For construction of boundary wall with crs masonary and barbed wire with rcc fencing pole for newly allotted sub station land at baghhayathnagar village (survey.no.207) hayathnagar mandal in saroornagar circle
Tender For bid to ras supply of brass 15mm isi mark , gi nipple 15mm 8 inch long , gi plug 15 mm dia , gi plug 20 mm dia , gi reducer socket 25mm dia to 20mm dia isi marked , gi socket 15 mm isi mark , gi socket 20 mm isi mark , gi tee 15 mm isi mark , gi tubing med gde 20mm is 1239 , gi union 25mm isi mark , glass self corner 12inch by 12inch thicness 5mm with cp railing , glass self straight 20 inch with cp railing 15mm , grating cp 100 mm hole , hack saw single blade 300mm , kitchen rack ss l 24 inch w 30inch d 10inch , kitchen rack ss superior quality size l 36 inch w 36 inch d 10 inch , kitchen sink 36inch by 18inch by 7inch ss with drain board , knob for side board dressing table writing table etc , laminated sheet or sunmica l 8ft w 4ft thick 1mm , magnetic catcher for cupboard or wardrobe l 30mm w 10mm thick 60mm , masonary screw full thread 20mm guage 8 mm , melamine high glossy 1ltr per pack , mirror for dressing table ladies l 48 inch w 15 inch , mirror looking l 20 inch w 16 inch with pvc frame , ms screw wood 35 mm 8 gauge 100 nos in pack , m seal in 100 gm per packet , nails wire steel 100mm , nipple gi 15mm dia 2inch long , nipple gi 15 mm dia 4inch long , nipple gi 15mm dia 6inch long , nipple gi 20mm dia 4inch long , nipple gi 20mm dia 6inch long , paint brush 50mm , particle board prelaminated l 2400mm w1200 mm thickness 12mm , pegs alluminium hook 100 mm , pillar cock fancy type 15 mm cp , ply teak face l 8 ft w 4 ft thickness 4 mm , ply wood commercial l 8 w 4 thickness 8mm bwr , ply wood commercial l 8 ft w 4 ft thickness 12mm bwr , plywood l 8 ft w 4 ft thickness19mm bwr , plywood commercial l 7 ft w 3ft thickness 12 mm bwr , ply wood commercial l 8 ft w 4 ft thickness 4 mm , pvc angle cock 15 mm , pvc pipe 40mm dia 3mtr long , pvc seat for chair dining , pvc stop cock internal thread 15mm , pvc tank nipple 20mm , pvc waste coupling 50 mm for stainless steel kitchen sink , red oxide primer 1 ltr in pack , sand paper grit 150mm l 280mm w 230mm , seat and back for chair school , seat cover plastic for ewc white colour , shower rose 100 mm square with 8 inch arm cp 15 mm , sink mixer wall mounted cp 15mm , stop cock brass 15 mm external thread , stop cock brass 15 mm internal thread , teflon tape white l 1200mm w 12mm , telescopic channel l 18 inch , thinner pack of 1ltr , touch wood in 1 ltrs pack , union socket 15mm , wall mixer 3 in 1 with l bend 15 mm , waste pipe plain pvc 32 mm , white cement 1 kg pack , wire mesh gi width 1200mm 15 mtr length 0 point 56 mm nominal dia of wire and average width of aperature 1 point 18mm weight not less than 3.28 kg per sqmtr , wooden beads for fixing glass 2nd class seasoned size 10mm by 10mm , paint enamelled black in 1 ltr pack , paint enamelled grey in 1 ltr pack , paint enamelled og in 1 ltr pack , paint enamelled white in 1 ltr pack , curtain rod holder lattu 20mm silver
Tender For supply of pbs roll terflet 1m wide and 20m long , plywood 12 mm thick 8ft x 4ft , pvc service tank 1000 ltrs capacity , ply wood 4ft x 8ft 4mm thick , ply wood 8ft x 4ft commercial oblique one side teak face size 4mm , oil emulsion distemper white , float valve 15mm plastic , indigo floor paint terracotta , super flash strip oblique bitumen tape size 2 inch , ply wood 8ft x 4ft commercial oblique one side teak face size 6mm , acrylic weather proof exterior emulsion appex white , pvc service tank 500 ltr , float valve 20mm plastic , paint se black , wooden planks 8inch x 1inch x 8ft teak wood , scantling wooden 3inch x 2inch x 8ft teak wood , plastic emulsion paint off white , thinner , paint red , plastic emulsion paint white , paint se sky blue , sprit per ltr , gi tee 1.5inch 15mm , e-board ceiling 4mm thick size 600 x 600mm armstorng , silicone sealant with gun clean colour , acrylic emulsion paint colour oxford blue , oil emulsion distemper off white , paint se green , paint white road marking , pvc pipe 50 mm dia length 3 mtr , oil putty kohinoor , gi tank nipple 15 mm x 300 mm long , varnish , paint olive green , tank cover 1000 ltr , pvc pipe 100 mm dia length 3 mtr , pvc pipe 75 mm dia length 3 mtr , synthetic resign adhesive fevicol , brush for paint 6inch , screw wood 15 mm , paint yellow , gi nipple dia 15 mm dia 150 mm length , indigo floor paint yellow , m seal water based , pgi sheet 22 gauge , gi elbow 1.5 inch 15mm , drill bit for iron5 pieces 4mm, 6mm, 8mm,10mm and 12mm , elbow pvc 75 mm dia , acrylic weather proof exterior emulsion appex green , screw wood 20 mm , aluminium paint 4ltr container , drill bit for wood work complete 3 pieces 4mm, 6mm and 8mm , tank cover 500 ltr , elbow pvc 100 mm dia , gi uniion 1.5 inch 15mm , elbow pvc 50 mm dia , brush for paint 4 inch , gi socket 15 mm dia , acrylic emulsion paint colour marble grey , screw wood 35 mm , screw wood 25 mm 100 nos per pkt , screw wood 75 oblique 80 mm , gi nipple 15 x 50 mm long , white cement in 1 kg pkt , tera cota , gi nipple 15 mm x 100 mm , drill bit for concrete set of 5 pcs , screw wood 40 mm , gi tank nipple 15mm , nails wire 2inch 50 mm , nails wire 1.5 inch 40 mm , brush for paint 2 inch , screw wood 25 mm , termite killer 500 ml container , nails wire 3inch 80 mm , nails wire 1inch 25 mm , gi socket 20 mm dia , nails wire 4inch 100 mm , wall care putty , rotary hammer masonary drill bit set of 3 pcs 25mm, 30mm and 40mm , panel pin 1 x 17 mm , hack saw blade , brush for paint 1 inch , gi plug 20mm , emery sheet abb cloth no 80 , gi nipple 15 mm x 75 mm , gi tank nipple 20mm , nails wire 2.5 inch 60 mm , nails 5 inch , nails 6 inch , gi plug 15mm //bid details 2 / 68
Tender For rrsmp/25-26 bagaha-1/03 - khabtola gulten miyake ghar se shekh karmulah ke ghar tak, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth
Tender For rrsmp-25-26 chakia-03 - dekha bandh to ajit singh ke tola tak, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., cement cuncrete, reinforced cement concrete, dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per (stone masonary/brick masonary), construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, reinforced