Latest acrylic cover Tenders | Government acrylic cover Tenders

CTN :45443260

19 Jun, 2026 56

Mangalore - Karnataka

Tender For supply of street light materials for yekkar grama panchayath, mangalore taluk and dakshina kannada district. - solar panel 50 watts, led solar strret ligts 18 watts built in charge controler ah life po4 battery, regular street light canopy, h/d choke 40 watts , led tube light set, led lamp 50 watts , meter box, hook up wire, regular acrylic cover with frame, led street light set 90 watts , led street light set 72 watts , led street light set 50 watts -sur, acrylic cover 36 watts , electronic choke 40 watts , screw nut washer, mh lamp 250 watts, sv lamp 250 watts , sv holder 250 watts , condensor 33 mfd , igneitor, mh choke 250 watts , led lamp 15watts , sls 140 al.body regular street light set with h/d choke & starter, cfl set 45 watts , cfl set fiber36 watts , regular trey wired up, rotor holder, tube 4 inch, starter-sur, clamps for led set, bend pipe for led set, cts wire 10 sq mm, cts wire 6 sq mm, cts wire 4 sq mm, cts wire 2.5 sq mm, mcb cover, mcb s/p 32 amps, d.p switch 32 amps, cfl holder _, insulation tape _, one way gang box, aluminium led set, led street light set 24 watts, led street light set 72 watts, led flood light set 100 watts, led lamp 23 watts, led lamp 18 watts, led lamp 30 watts, clamps for street light set, led flood light pcb 100 watts, led flood light driver 100 watts, bend pipe for street light set, switch 5 amps, led street light set 36 watts, led pcb 36 watts, led driver 36 watts

CTN :45428666

18 Jun, 2026 54

Mangalore - Karnataka

Tender For supply and installation of street light materials for permude grama panchayath, mangalore taluk and dakshina kannada district. - regular street light canopy, h/d choke 40 watts , led tube light set, led lamp 50 watts , meter box, hook up wire, regular acrylic cover with frame, led street light set 90 watts , led street light set 72 watts , led street light set 50 watts -sur, acrylic cover 36 watts , electronic choke 40 watts , screw nut washer, mh lamp 250 watts, sv lamp 250 watts , sv holder 250 watts , condensor 33 mfd , igneitor, mh choke 250 watts , led lamp 15watts , sls 140 al.body regular street light set with h/d choke & starter, cfl set 45 watts , cfl set fiber36 watts , regular trey wired up, rotor holder, tube 4 inch, starter-sur, clamps for led set, bend pipe for led set, cts wire 10 sq mm, cts wire 6 sq mm, cts wire 4 sq mm, cts wire 2.5 sq mm, mcb cover, mcb s/p 32 amps, d.p switch 32 amps, cfl holder _, insulation tape _, one way gang box, aluminium led set, led street light set 24 watts, led street light set 72 watts, led flood light set 100 watts, led lamp 23 watts, led lamp 18 watts, led lamp 30 watts, clamps for street light set, led flood light pcb 100 watts, led flood light driver 100 watts, bend pipe for street light set, switch 5 amps, led street light set 36 watts, led pcb 36 watts, led driver 36 watts

CTN :45404144

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electronics and communication engineering department - supply of equipment for electronics and cmmunication engineering department, 8051 micro controller kit :specification : operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., temperaturemeasurementkitspecification : sensors:rtd (pt-100), thermocouple (fe-k/j-type), and/orthermistor (ntc). display: 3 digit led/lcd digital display(typically 200 mv fsd). temperature source: portable water kettle orheater block. signal conditioning: on-board circuitry foramplification, linearization, and cold junctioncompensation. test points: multiple 2 mm / 4 mm banana socketsfor monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntcthermistor probe, k-type thermocouple probe,patch cords and user manual., ask modulationanddemodulation kit:specification : message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz,amplitude 5 v. modulator type: switching modulator using analogswitch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kit:specification :power supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshootingexperiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise blockdiagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection withdoordarshanfree channels. free-to-air channel demonstration., fpga trainer kit:specification : must use industry-standard mid-range fpgadevice usb-jtag programmable, compatible withvivado ise (webpack). power supply: 5 v dc through usb or externaladapter. on-board peripherals: leds, switches, pushbuttons, 7-segment display,clock source, gpio /pmod expansion ports, uart, vga / hdmi, usbuartbridge, usb cable. user manual.

Central Government/Public Sector

CTN :45396083

08 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of woama make acrylic cover for woama make wc-8 relay. as per woama part no. we/rl/wc8/312. [ warranty period: 30 months after the date of delivery ] ]

CTN :45363413

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of euipments for ece lab - ece laboratory, dth trainer kit power supply 200v to 240v ac, 50hz, dish antenna 1.5 aluminum steerable, lnb low noise block down converter input frequency ku band.output frequency 950 to 1450 mhz. conversion gain 65 db. noise temp 35 degree k max. set top box receiver in trainer form if frequency 70 mhz.video bandwidth 50 hz to 5 mhz. video output level 1 vpp at 75 ohm load video polarity normal and or inverted switch selectable audio sub carrier frequency tunable from 5.0 to 8.0 mhz. r.f output channel no 2 uplink satellite insat 4a controls channel selecting, volume, faults 5 no. pcb size 15"x12" with block diagram in multicolor section wise standard accessories dish antenna1.5 feet,lnb,trainer pcb,dish connecting wire, audio-video cable,teaching manual,acrylic cover. hardware material for assembly of dish antenna. dth subscription connection doordarshan free channels

CTN :45379134

10 Jun, 2026 NA

Arakandanallur - Tamil Nadu

Tender For for electrical and communication engineering department lab equipments are required as per new syllabus - upgradation of labarotariesece department, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., single phase induction motor1 hp, 230 v ac, 1500 rpm with loading arrangement 1 no.voltmeter: (0 300) v ac, 96 96 mm with input terminals 1 no.ammeter: (0 10) a ac, 96 96 mm with input terminals 1 no.wattmeter: 2 kw, 96 96 mm with input terminals 1 no.power factor meter: 96 96 mm with input terminals 1 no.auto transformer: 0 300 v, 1 variac 1 no.mcb: 2-pole, 40 a / 230 v ac 1 no.digital rpm indicator with proximity sensor 1 no.aluminium brake drum: 230 mm diameter 1 no.spring balance: (0 25) kg 02 nos.circuit diagram printed on front panel with instruments and connecting terminals.motor and loading arrangement mounted on rigidchannel frame with anti-vibration mounting pads, m12 1.5 bolt & nut, 85 mm dia 4 nos.mild steel powder-coated electrical panel tablesetup., auto transformerinput: 230 240 v ac, 50 hz.output: variable (0 270) v ac.rating: 1 kva.insulation class: class f / class h.construction: copper winding with carbon brush arrangement.mounting: bench-top / panel type.protection: suitable fuse / overload protection., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz. dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m. controls: channel selection. volume control. fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption. pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna. additional features: dth subscription connection with doordarshanfree channels., sim reader trainer kitpower supply: operates on 230 v ac 10%, 50 hz mains supply. built-in regulated smps power supply. operating dc supply: 5 v / 12 v with overload and short-circuit protection.sim card interface: supports gsm sim cards compatible with 2g / 3g / 4g / 5g networks. sim card read/write interface. supports sim card initialization, authentication, and communication functions. compatible with standard 6-pin / 8-pin sim card sockets.communication interface: usb 2.0 interface for pc communication. rs-232 serial communication interface. uart communication facility for embedded system interfacing.sim operating parameters: selectable sim clock frequencies: 3.579 mhz 7.159 mhz 14.318 mhz sim supply voltage selection facility. sim reset and activation control. supported protocols and standards: gsm etsi 07.07 and etsi 07.05 at command support. iso/iec 7816 smart card communication support. sim communication command monitoring facility. hardware features: on-board sim card socket. led indication for: power status sim detection reset activity data transmission/r

CTN :45359530

09 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For applications for empanelment of agencies for various publicity related works and supply of gift articles/mementos as per categories detailed below:-a1 category descriptions glow sign board/signage/3m glow sign board / pvc board/acp sign board/neon sign board/ 3d acrylic letter/epoxy letter on board fabrication, repair and installation of hoardings/glow sign board /signage in the city/rural area branch/satellite offices exhibitions/fairs/events/etc. a2 printing of flex banner/ back drop/ cotton banner/ silk banners/sashes/ badges & stickers/ posters/certificates/podium/booklets handbills/canopy etc a3 a4 handbills/ pamphlets/ offset print /poster/reflective posters/danglers/certificates /product catalogue identity card etc. advertisement through local channel/ fm/cable/electronic media/ newspaper etc. a5 publicity through mobile van/ wall painting/wall wrapping/led walls/led vans/led board display/ glow pole/display board with backlit/ balloons/umbrella/ taxi cab/ inflatable hoarding/ 3 d hoarding tree guard/ hoarding/bus shelters etc a6 event management b competition prizes viz. gift articles/mementoes / crockery items / electronic and electric items/home appliances/consumer durables/promotional items and giveaways etc. medals/trophies/shields /plaques/frames/printed fabrics and items (t shirts, caps, cups, diaries/calendars/bags/wallets etc).

CTN :45343672

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of electronics and communication engineering practices (equipment) - equipments for electronics and communication engineering practices:, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc2148) cpu -lpc2148, core -16/32 bit arm7tdmi-s speed -max 60 mhz, flash -512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converterwith 14 analog inputs, one 10bit d/a converter, six pwm &watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, ask modulation and demodulation kit message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz, amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. modulator type: switching modulator using analog switch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter):input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency: tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection with doordarshanfree channels. free-to-air channel demonstration.

CTN :45339077

02 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 :for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2: bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may becommunicated before prototype approval. note-3:annexure-improvements-vande bharat chair car coaches is applicable. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45199250

02 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2 bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may be communicated before prototype approval. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Acrylic Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector