Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join
Tender For material supply for all type construction work for year 2026-27 (under all fund) - sand (kanhan), sand local, soft murun, hard murun, metal 100 mm, metal 80 mm, metal 40 mm, metal 20 mm, metal 10 mm, dust, rcc pipe 300 mm with colar, rcc pipe 450 mm with colar, rcc pipe 600 mm with colar, rcc pipe 800 mm with colar, rcc pipe 900 mm with colar, rcc pipe 1000 mm with colar, cement 53 grade isi mark, still 6 mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, centring tar, vibrator needle, water trankar & tractor troali, backhoe loader, vibrator roller, simple steering road roller, mixchar machine, excavator 70 to 120, excavator 120 to 220, fiori 1 cubic meter, fiori 2 cubic meter, centring plate, water proof compound, acrylic polymer modified liquid, acrylic polymer modified waterproofing powder, fibre glass mesh, plastic emulsion paint, water proof cement paint, lead / zink base oil paint, oil bound distemper, primer, washabe oil bound distemper, putty, birla white cement, terpentine, wood primer, information board still with painting, single lef door 16 mm thik, single lef door 32 mm thik, solid panel pvc internal door shutter, door kittas, door fremas, aluminium fixed windows (two track sliding ), aluminium fixed windows (three track sliding ), aluminium fixed windows with mosquito net (three track sliding ), chequered tiles, caramic tiles, vetrifide tiles, cota stone, marble tiles, granite tiles, red bricks (hat bhatta), red bricks (round bhatta), bricks fly aish, peving block 60 mm, peving block 80 mm, rcc compound poles 8ft, rcc compound poles 6 ft, pvc nahani, gally trap 15*10 mm, swr pipe 110 mm, screw down bib 15mm, ladies ceramic urinal, wall mount urinal, water close pan complit, indian orissa pan, basin pan, water storage tank 500 ltr, water storage tank 1000 ltr, water storage tank 2000 ltr, steel work, mild steel hollow pipe, mild steel i section beam, mild steel c section beam, mild steel angle, cenring kills, nut bolt and washer, profile sheet isi 0.50 mm, profile sheet fancy isi 0.50mm, g.i. sheet, stenless steel seatting bench, mild steel seatting bench, rcc bench, barbed wire / fenshing wire, electric brecker machine
Tender For supply of supply of materials for various sub-division -description supply of industrial electrical safety helmet of standard size as per sample in white colour of brim with peak as per clause 3 of is 2925 lightweight polyethylene hdpe/abs (high density polyethylene/acrylonitrilebutadienestyrene) made ratchet type adjustment, sweatband of good quality with high comfort level & non-allergic material/anti skin irritant material, nylon chin strap. supply of retroreflective heat resistant phase tape in red yellow and blue colour of standard make (20 mtr x 4nos for each colour) for metal structure (hot pressure bonding type grade 1) conforming to is 14221 supply of lithium battery long range led torch light with emergency light/back light torch with rechargeable slot and charger as per is standard with 2years waranty card of philips /standard make with 1200mah capacity and as per sample electrical safety gumboot of highly electrical resistant material of size as per sample adhering to relevant is standard the shoe should be non-metallic/non-conductive sole-single/double density pu sole should be electric shock resistance, high voltage test of at the minimum thickness shall with stand minimum 15000 volts for minimum 20 sec when tested according to is:2584/is:2071 polyvinyl chloride made electrical safety handgloves of highly electrical resistant material of size as per sample adhering to relevant is standard as per is 4770-1968 & en 60903. hand gloves for working potential 11kv should be tested on 33kv potential, eakage current & thickness confirmation to is 4770. length of hand gloves 400 mm. hand gloves should be natural latex and eamless rubber. batch wise test certificates of confirmation to relevant is 4770-1991 (or atest) & en 60903 shall be provided at the time of supply
Tender For corrigendum : purchase of surgical items and sutures at bundi - surgical and sutures, absorbable gelatin sponge ip 66, size 80(+-10) mm x 50 mm x 10 mm should be sterlized., asepto syringe with transparent bulb sterile, 60 ml, blood administration set / blood transfusion set sharp and easy piercing spike suitable for blood bags and standard blood containers transparent cylindrical drip chamber with filter.filter size should be 200+20 micrometer. 150 cm long smooth kink resistant tubing efficient roller clamp to control and adjust the transfusion rate should conform to is 9824(part 3):1996, disposable sterile surgical rubber gloves size 6 inches made of natural rubber latex, powdered, without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked / ce certified / fda approved, disposable sterile surgical rubber gloves size 6 inches made of natural rubber latex, powder free (polymer /silicon coated), without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 should conform to is 13422isi marked / ce certified / fda approved (ce certification / fda approval for item is mandatory for importer firms, that cannot avail is standards), disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powdered,,without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked / ce certified / fda approved, disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powder free (polymer /silicon coated), without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 should conform to is 13422isi marked / ce certified / fda approved (ce certification / fda approval for item is mandatory for importer firms, that cannot avail is standards), disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powdered, without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked / ce certified / fda approved, disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powder free (polymer /silicon coated), without tear, properly folded in a paper free of holes, with acceptable quality level (aql) of 1.5 or less tensile strength as per en 455-2 should conform to is 13422isi marked / ce certified / fda approved (ce certification / fda approval for item is mandatory for importer firms, that cannot avail is standards, suction catheter, sterile. size: fg 5 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 6 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 8 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should conform to is0 8836:2014, suction catheter, sterile. size: fg 10 (for use in respiratory tract) soft, kink resistant tubing rounded open tip with lateral eye colour coded universal funnel connector for safe connection to standard suction equipment length 50 cm (min.) should co
Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l
Tender For supply of cement opc , river sand coarse , aggregate 20 mm , plasticizer or super plasticizer , shuttering form work , red bricks , wooden log reqiured shape , ms jali as per drawing , wpc door shutter including accessories , high polymer modified quickest tile adhesive , ms wire nail all size , nylon rope , s.s screws , grinding cutting disc , tile pigment , granite pigment , putty blade , sand paper , paint tray , paint roller , tmt steel bar 20 mm , tmt steel bar 16 mm , tmt steel bar 12 mm , tmt steel bar 10 mm , tmt steel bar 8 mm , binding wire , truss member rhs 240 x 120 x 6 , purlin member rhs 100 x 50 x 4 , purlin member shs 50 x 50 x 3.6 , column member vertical 200 x 200 x 6 , vertical member of truss shs 72 x 72 x 4.8 , column member shs 150 x 150 x 5 , member along ramp longitudinal side rhs 145 x 82 x 4.8 , member along ramp transeverse side rhs 145 x 92 x 4.8 , elevation elements shs 75 x 75 x 5 mm , rhs member 240 x 120 x 6 , rhs member 50 x 50 x 3.6 , cement fibre board 12 mm thick 8 x 4 ft , shingles bitumen , cgi tin shed 12 x 3.5 ft , ridge , screw all size , glass wool 25 mm thick , thermacol 25 mm thick , s.s screws or fastener as required , vitrified tile antiskid 600 x 1200 mm , vitrified tile 600 x 600 mm , granite , upvc window including accessories , aluminium window including accessories , toughned glass for fixed portion including accessories , toughned glass for swing portion including accessories , silicon selant , dash fasteners all size , acp sheet , wooden flooring , wpc wall and false panelling , pvc false ceiling , polycarbonate sheet , gypsum board 6 x 4ft including all accessories , white cement based wall putty , interior emulsion primer , interior emulsion royal shine plastic paint , exterior premium acrylic silicon additive paint , synthetic enamel paint , fire retardant paint , thinner , red oxide , zinc primer , hand rail , grinding or cutting disc 16 , dr fixit urp 301 , paver tiles & & / bid document 1 / 68