Latest adapter sleeve Tenders | Government adapter sleeve Tenders

corporations/Associations/Others

CTN :45445697

19 Jun, 2026 15.14 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

CTN :45450737

06 Jul, 2026 25.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For regarding purchase of material for the electricity department for the year 2026-27 - led bulb , led tube light , tube light set , cfl bulb , high mast light , flood light , street light , ceiling fan , wall-mount fan , exhaust fan , cooler motor , submersible cable , service wire , aluminium wire (300 ft) , aluminium wire (300 ft) , aluminium wire (300 ft) , aluminium wire (300 ft) , aluminium wire (300 ft) , aluminium wire (300 ft) , copper wire , pvc wire , cable wire , flexible wire , utility pole wire , mcb , dp switch , main switch , changeover switch , distribution box , fuse unit , starter , choke , holder , switch , socket , multi-plug , plug top , indicator , regulator , bell switch , electric bell , conduit pipe , casing-capping , junction box , insulation tape , cable tie , lugs , thimble , earthing set , earth wire , light pole , gi pipe , pvc pipe , cable drum , transformer oil , contactor , timer switch , voltmeter , ammeter , multimeter , tester , megger , electric drill machine , cutting pliers , screwdriver set , lineman pliers , aluminium ladder , hand gloves , safety belt , rubber mat , inverter , battery , generator wiring material , solar light , solar panel , solar charge controller , battery terminal , cable joint kit , electric motor , starter motor , screw set , nut-bolt set , fastener set , wire reel , extension board , power strip , camera power cable , hdmi cable , lan cable , rj-45 connector , led decorative string lights , serial lights , high voltage insulator , cable marker , gi strip , busbar busbar , neutral link , phase indicator , wire channel , cable gland , pvc bend , pvc saddle , fan hook , insulated tool kit , electrical tool box , crimping tool , cable cutter , wire stripper , hammer , electrical tape , double-sided tape , cable jointer , cable sleeve , heat shrink tube , fiber tape , panel lock , panel handle , industrial plug , industrial socket , three-pin top , cable roller , pulley set , warning board , safety cone , barricade tape , reflector jacket , helmet , face shield , rubber shoes , fire extinguisher , fire bucket , solar dc wire , mc4 connector , solar mounting structure , wire mesh , cable tray , angle channel , gi wire , copper plate , charcoal and salt , digital clamp meter , earth tester , battery distilled water , wire label , junction kit , led driver , smps , cctv power supply , electrical spray , lubricant oil , submersible cable , submersible cable , mcb , mcb , mcb , mcb , dp switch , dp switch , main switch , main switch , main switch , changeover , changeover , distribution box , distribution box , distribution box , fuse unit , contactor , timer switch , starter , electronic choke , holder , holder , switch , switch , socket , socket , multi-plug , plug top , plug top , indicator , fan regulator , bell switch , electric bell , pvc conduit pipe , pvc conduit pipe , casing-capping , junction box , insulation tape , cable tie , copper lugs , aluminium lugs , thimble , earthing set , earth wire , earth wire , gi pipe , gi pipe , pvc pipe , light pole , light pole , light pole , pole clamp , cable clamp , cable drum , transformer oil , voltmeter , ammeter , multimeter , line tester , megger , electric drill machine , cutting pliers , lineman's pliers , screwdriver set , aluminium ladder , aluminium ladder , safety gloves , safety belt , rubber mat , inverter , inverter , battery , battery , ups , battery charger , generator wiring set , solar light , solar panel , solar panel , solar charge controller , battery terminal , cable joint kit , electric motor , electric motor , starter motor , starter motor , automatic cutout , surge protector , sensor light , digital time switch , three-phase meter , single-phase meter , electric panel board , taparia pliers

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

CTN :45448139

26 Jun, 2026 NA

Khorda - Odisha

Tender For supply of bearing sleeve , material test certificate , coc from the manufacture , 100 percent dimensional inspection report , freight

CTN :45454513

03 Jul, 2026 NA

Saran - Bihar

Tender For fire retardant 100 % cotton work wear with following specification, material:100% flame retardant cotton flame retardant treatment, style: jacket and pant (with reflective tape), weight: range of 350 to 450 gsm, colour: blue, closure: a heavy duty brass zipper extending form bottom to top of collar, button: metal, adjustment l button, stitching: lock-stitched with f.r thread, design: (i) jacket- (full sleeve, turn down collar, two chest pockets (left side & right side), pocket has protective flap with and covered metal button, front closing with flap type heavy duty metal zipper, quick releasepress buttons to be provided. (ii). trousers-(the trouser should be provided with two side pockets, metal zipper) standard tested according to en iso 11612: 2008 class a1 plus a2, b1, c1, e3 f1. make: podder trading, udyogi, hicare, leslico or equivalent. note - firm should supply advance sample for feel and appearance before bulk supply to consignee. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45316030

10 Jun, 2026 4.90 Lacs

Giridh - Jharkhand

Tender For corrigendum : so(enm)/grd/e-nit/26-27/12 dtd- 25.05.2026 - complete repairing and maintenance of one (01) no. 1000gpm, 150 mtr. head, 150/200 ipb x 3chrs, wilo pump (mother & platt make) (sl. no.- 81316960/10/8) pump assembly of giridih area, machining charges of pump shaft with new key way, threads, bearing seats for above pump (without material), gun metal 2nd & 3d stage impeller new making as per sample with key ways., gun metal suction impeller repairing by both side color brass buildup and machining as per required std size., key new making for impellers., cast steel metal shaft sleeve new making for de & nde, c.i. casting neck ring new making., c.i casing neck bush new making., old neck rings and neck bushes opening, cutting and new neck ring and bush fitting with drilling, tapping and fixing csk head., c.i casting diffuser new making as per sample with casting., chamber body over size boring with alignment for fixing o/s new diffuser, chamber & diffuser locking & fixing with each other., chamber & diffuser neck ring & neck bush seat machining on lathe machine with body alignment checking, facing, gun metal casting balance valve new making, gun metal balance disc seat increasing, machining, drilling, counter hole making, sizing., roller bearing nu-313 new provide., pump body bolt new making as per sample with double nut., repair kit like as gasket packing, "o" rings, rubber joint packing, waterdeflector, oil rings, test cork, bye pass pipe line, cooling ring. gland studs., complete pump assembly dismantling and re-assembling & setting.., total impact of gst for the purpose of ctc

corporations/Associations/Others

CTN :45433945

15 Jun, 2026 NA

Luckwada - Chhattisgarh

Tender For supply of 1600034188 bearing with sleeve 23152k plus h 3152 , 1600016158 bearing roller sph 23036ck plus h3036 with sleave , 1600016155 bearing roller sph 23032ck plus h3032 with sleeve , 1700004950 bearing with sleave 23156 , 1600016156 bearing roller sph 23034ck plus h3034 with sleeve , 1600016271 bearing roller sph 22222 ck , 1600016757 bearing sleeve h322 , 1600016394 bearing roller sph 23040 e1akm with sleeve , 1600837050 bearing roller sph 23028ck plus h3028 with sleeve , 1600016400 bearing roller sph 23148ck h3148 with sleeve , 1600016385 bearing roller sph 22320 , 1600016291 bearing roller sph 22318 , 1600016201 bearing roller tpr 32038x , 1600016293 bearing roller sph 22326 , 1600036507 1st intermediate end bearing 32317 , 1600016211 bearing roller tpr 32316 , 1600377877 bearing 32034 , 1600033744 bearing 23176 cak w33 with sleeve oh 3176 h , 1600016276 bearing roller sph 22228 ck , 1700006489 adapter sleeve h3128 , 1600016282 bearing roller sph 22236 ck 22236 , 1600024489 adopter sleve h 3136 , 1600016381 bearing roller sph 22244k h3144 with sleeve , 1600200270 bearing 22211cck plus h311

Central Government / Public Sector

CTN :45427453

18 Jun, 2026 NA

Digboi - Assam

Tender For procurement of spares of scraper chiller installed in sdu unit as per tender specification at digboi refinery - laying and jointing pvc pipe. heading, shaft tube,p/n:50, as per tender specification, brg. journal,p/n:58, as per tender specification, brg. journal,p/n:59, as per tender specification, adapter sleeve,p/n:62, as per tender specification, ring,p/n:66, as per tender specification, scraper blade holder,p/n:69, as per tender specification, coil spring,p/n:71, as per tender specification, adapter sleeve,p/n:72, as per tender specification, spider bearing,p/n:91, as per tender specification, drive shaft,p/n:110, as per tender specification, threaded pin,p/n:116, as per tender specification, stuffing box packing,p/n:128, as per tender specification, v-ring,p/n:135, as per tender specification, sprocket wheel 20teeth,p/n:100, as per tender specification, shaft nut,p/n:103, as per tender specification, fitted disk,p/n:109, as per tender specification, cover,p/n:111, as per tender specification, follower,p/n:119, as per tender specification, ring,p/n:120, as per tender specification, ring,p/n:139, as per tender specification

Central Government/Public Sector

CTN :45454022

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For pvc sleeve for covering berth chain link and shackle, size 30 +/-1 mm id x 1.0 mm thick x 50 mtr. long (in a roll). material shall be conforming to is: 5831 : 1984 (reaffirmed year : 2021 ) , type st1. colour shade of material as per rdso sample code no. al-ac-01. note: sample to be approvedbefore bulk supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45429798

12 Jun, 2026 NA

Sonpur - Bihar

Tender For auction sale of depot miscellaneous scrap - dms-scrap-ghz, lot no.- 342605010, total weight-4.7 mt, material description- scrap condemned damaged cloth like trouser serge ordi, dark grey, trouser serge sup blue,shirt hs sky blue, cardigan woolen grey, shirt orange, trouser serge sup dark grey, trouser tc bluish grey, shirt fs tc white, bushirt half sleeve terry cot white, trouser dark grey, full shirt drill sulphur blue, shirt half sleeve grey, bluish hs terry cot white, terry cot blouse, coat serge superior blue. location- inside ward no.- 01

Adapter Sleeve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector