Latest adhesive backing Tenders | Government adhesive backing Tenders

CTN :45682125

13 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of single side coated glass cloth with special water proof coating on one side and adhesiveon other side. size 8" width & 20 mts long in roll. as per specification (a)total thickness : 0.3 %b1 0.08mm. (astmd1000) (b) tensile strength kg/2.5cm : 35 kg/2.5 cm, min. (is-7809 or latest) (c) elongation % : 5% min. (is-7809 or latest) (d) adhesion to steel (g/2.5 cm) : 3200 g/2.5 cm, min. (is-7809 or latest (e) water permeability : not more than two drops after two hours as per pstm 373 for non-adhesive backing (f) oil resistance : passes the test as per pstm 384. (g) alkali resistance : passes the test asper pstm 385. (h) mvpt : not more than 2.00 g/sqm after 24 hours at 40 degree centigrade. when tested as per ind/me/790(a) standard. (i) weathering resistance: no cracking should be observed on the coated surface when exposed for 200 hrs. as per sae j 1960 in standard xenon dimension (a) length :20 mts (b) width : 8 inch spec:: 0.3 %b1 0.08mm. (astmd 1000). [ warranty period: 30 months after the date of delivery ] ]

CTN :45492485

30 Jun, 2026 NA

Siang - Arunachal Pradesh

Tender For supply of box mounting tata 407 truck , brake light switch tata 407 truck , steering u j cross tata 407 truck , oil filter tata 712 bus , u j cross tata 712 bus , drag link tie rod end tata 712 bus , brake shoes lining with rivit tata 712 bus , air filter assy tata 712 bus , fan belt water pump tata 712 bus , rear slack adjuster tata712 bus , front slack adjuster tata712 bus , rear slack adjuster tata1512 bus , front slack adjuster tata1512 bus , centre bearing with rubber tata1512 bus , fuel water seprator sml truck , u j cross sml truck , oil filter main bs iv sml truck , oil filter by pass bs iv sml truck , clutch plate sml truck , clutch cover sml truck , clutch release bearing sml truck , brake shoe lining with rivit front sml truck , differential oil seal sml truck , common rail pressure switch sml truck , brake shoe rivit sml truck , front right and left side indicator assy sml truck , brake tandum master cylinder assy sml truck , front wheel cylinder r and l both side sml truck , rear wheel cylinder r and l both side sml truck , propeller shaft slip joint assy sml truck , dosing valve bs vi sml truck , front axle assy rh ford endeavour , front axle assy lh ford endeavour , fan belt ford endeavour , brake shoe lining rivit mahindra bolero , air filter mahindra bolero , engine oil filter mahindra scorpio n , front brake disc pad mahindra scorpio n , rear brake disc pad mahindra scorpio n , fuel filter mahindra scorpio n , wiper blade mahindra scorpio n , engine oil filter maruti jimny , front brake disc pad maruti jimny , fuel filter maruti jimny , wiper blade maruti jimny , engine oil filter mahindra thar , front rh hub assy mahindra thar , front lh hub assy mahindra thar , rear brake shoe mahindra thar , fan belt mahindra thar , wiper blade mahindra thar , engine oil filter isuzu d max , front disc pad isuzu d max , rear brake isuzu d max , fan belt isuzu d max , wipper blade isuzu d max , steering u j cross tata safari strome , brake disc pad front tata safari strome , brake disc pad rear tata safari strome , head brake cable assy tata safari strome , balancing rod bush tata safari strome , front disc rotter tata safari strome , king pin maruti gypsy , u j cross maruti gypsy , king pin bearing maruti gypsy , spark plug maruti gypsy , injector maruti gypsy , fan belt maruti gypsy , anabond tube 200 gm , hexa blade , puncher big size , puncher tube , areldite tube 10 gm , flex kwik tube 20gm , tyre tube valve , hardner paint , paint clear premium 01 ltr pack , body filler , tap roll , electric wire role , bulb 1141 12 volt , fog light yellow , pop rivet , formation sign for light veh size 04 inch , formation sign for midium veh size 05 inch , formation sign for heavy veh size 6 inch , bridge clacification sticker heavy veh size 05 inch x 1 by 2 06 inch dia , bridge clacification sticker midium veh size 04 inch x 1 by 2 05 inch dia , bridge clacification sticker light veh size 03 inch x 1by2 04 inch dia , red reflective tape , yellow reflective tape , white reflective tape , police sticker size 6 inch , t monogram , veh tectical no , maintenance day signs 1 by 2 inch anabond tube , m seal , emery paper 80 no, 100no, 120no, hexa blade, puncher big size , puncher tube, //bid details 2 / 94

Central Government And Public Sector

CTN :45449823

26 Jun, 2026 NA

Surat - Gujarat

Tender For supply of non asbestos pure graphite tape with adhesive backing. width-12.05, thk-0.5mm density 1.1 g/cc , non asbestos pure graphite tape with adhesive backing. width-25.4 mm, thk-0.5mm density 1.1 g/cc , non asbestos pure graphite tape with adhesive backing. width-19.05 mm, thk-0.5mm density 1.1 g/cc

Central Government/Public Sector

CTN :45338679

08 Jun, 2026 NA

Tekanpur - Madhya Pradesh

Tender For supply of single side coated glass cloth with special water proof coating on one side and adhesiveon other side.size 8" width & 20 mts long in roll. as per specification (a) total thickness 0.3+ 0. 08 mm. (b) tenslle strength kg./2.5cm 35 kg/2.5 cm, min. (is-7809 or latest) (c) elongation % 5% min (is-7809 or latest) (d) adhesion to steel (g/2.5 cm) : 3200 g/2.5 cm, min. (is-7809 or latest) (e) water permeability : not more than two drops after two hours for non adhesive backing (f) oil resistance : passes the test. (g) alkali resistance : passes the test. (h) weathering resistance: no cracking should be observed on the coated surface when exposed for 200 hrs dimension (a) length : 20 mtrs. (b) width : 8 inch [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Co-operative

CTN :45061846

16 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of hardware (miscellaneous store item) - gasket slake compound, holdtite compound 500gm, anabond 666 (gasket cement)100 gm, rustoline (500ml), m.seal, graphite powder, red lead best quality, white lead best quality, emery paste 400 gm.packing rough & fine, rubber embed flate belt all size (dunlop/goodyear), brasso-450 ml, areldite 1.800kg. set, emery wheel carborandum male all size /type, grinding wheel for angle grinder 4", 5", break liner hindustan ferrodo make 1/2"x 8", 1/2"x 10", 1/2/"x 12", 3/8" x 8", steel wire rope hempcore fmc 6/36 all size/type usha martin make with test certificate, forged steel u clamp size 19 mm, cotton waste coloured, oil seal, mykoda make all size, boiler gauge glass bishop make size 3/4" x 16", packing sleeve for gauge glass size 3/4" leader make, boiler gauge glass b-9 klinger (gasket reflex type), gasket for klinger guage glass b-9, stage jointing paste type- b red for turbine suitable upto 650 cent., toughend sight glass 12 mm x 120 mm to 125 mm, 12 mm x 127 mm to 130 mm, 12 mm/15mm x 180 mm, 1/2" x 5 ", 1/2" x 7", 1/2" x 7 " to 7 ", 1/2" x 8"/ 15mm x 200mm, 1/2"/20mm x 8 " to 9", 20 mm x 8.5"/210mm/215mm, 5/8" x 7 " to 7 ", 5/8" x 8 " to 9", woolen felt namda 10 mm (4fit x 8fit sheet), spring steel flat all size, roller chain & its spares upto 2"/all size, emery cloth (carborendum ajex only) rough, emery cloth (john okay) rough, emery cloth (carborendum ajex only) 80 no./120 no. fine, emery cloth (carborendum) john okay fine, emery tape 2" rough (carborendum ajex only), emery tape 2" rough (carborendum) john okay, emery tape 2" fine (carborendum ajex only), emery tape 2" fine( carborendum) john okay, high carbon steel hexa blade 1/2" x 12" (miranda make only), teflon tape (champion make) 3/4", camel hair belt size 3/8" x 4", 3/8"x 8", 3/8" x 10", 3/8" x 12", 1/2" x 10", prusion blue tube, v-belt (fenner ,dunlop,hilton,pix,endura hi tech, contitech etc isi mark all section/ all size), wedge belt (spb belt) (fenner ,dunlop,hilton,pix,endura hi tech, contitech etc isi mark all section/ all size), tyre coupling complete (unique make) all size, spare tyre for tyre coupling (unique make), s.s.sheet/ plate 304 quality with t.c. 3 mm thickness, 5 mm thickness, 10 mm thickness, graphite flake (course/fine)(english avarce make), gear coupling od-290mm, hub dia 150+, suitable for rbc (unique make), s.s.shaft 50mm to 65mm, s.s.shaft 85mm to 90mm, bearing sleeve jmc make (all type all section), plumber block jmc make (all type all section), plumber block smr make (all type all section), loctite 262 -50ml pack, 250ml pack, loctite 641 -50ml pack, p.p.rope with test certificate 1/2", 3/4", 1", tor flex gear coupling (unique make) tgf-102, od 185, pb-30, l-145, tgf-103, od 220, pb-40, l-175, fgc-106, no of hole 8, pcd 273mm for cane chopper, fgc-106, no of hole 8, pcd 273mm, 15 mm for m/c pump, brass rod upto 3" / all size, cerimic blanket for boiler insulation size 7.62x0.61x25mm thick with stand upto pressure 600degree centigrade, m.s.perforated sheet size 48"x96" 4mm hole size x 1/8" thinkness, gear coupling gc-106, od-320mm, max.bore 125mm, forge teeth en-8 body (unique make), chief engineer

Central Government/Public Sector

CTN :45121195

28 May, 2026 NA

Tekanpur - Madhya Pradesh

Tender For supply of single side coated glass cloth with special water proof coating on one side and adhesive on other side.size 8" width & 20 mts long in roll as per specification. (a) total thickness : 0.3 +/- 0.08 mm. (b) tensile strength kg/2.5 cm : 35kg/2.5 cm,min. (is-7809 or latest) (c) elongation% : 5% min (is-7809 or latest) (d) adhesion to steel (g/2.5 cm) : 3200 g/2.5cm, min. (is-7809 or latest) : (e) water permeability : not more than two drops after two hours fornon- adhesive backing. (f) oil resistance : passes the test (g) alkali resistance : passes the test (h) weathering resistance : no cracking should be observed on the coated surface when exposed for 200 hrs. (a) length : 20 mts (b) width : 8 inch [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44819876

27 Apr, 2026 NA

Katni - Madhya Pradesh

Tender For vertical retro-reflective structure number sticker made of retro-reflective sheeting material conforming to rdso specification no. eti/ohe/33a (12/97), rev-8 (11/2012) or latest, without aluminium alloy sheet (plate). the structure number shall be printed in vertical orientation as per rdso drawing no. eti/ohe/p/7503 or latest. the drawing shall be referred only for font colour, background colour, letter style andfont type. however, the size of letters and overall dimensions shall be as per the attached number sticker drawing no.-trd/jbp/number sticker. the sticker shall be suitable for pasting on the back side of ohe masts for trd department and shall be provided with high-strength, weather-resistant, peel-off type self-adhesive backing with release liner, so that the protective backing paper can be removed and the sticker can be directly pasted on the mast without the use of any additional adhesive. locations for number plates shall be provided later after award of purchase order (po). before tpi or rites inspection, two (02) numbers of sticker samples shall be submitted by the firm and approved by the consignee. warranty period: up to 60 months from the date of supply. [ warranty period: 60 months after the date of delivery ]

Adhesive Backing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector