Latest adjustable lever Tenders | Government adjustable lever Tenders

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086306

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/28/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260754 bobsnm1 (nlb) 2) nr 75039187923 bobsnm1 (nlb) 3) sc 75099160133 bobsnm1 (nlb) 4) cr 75019208020 bobsnm1 (nlb) 5) cr 75019260097 bobsnm1 (nlb) 6) ne 75049260012 bobsnm1 (nlb) 7) nr 75039160537 bobsnm1 (nlb) 8) se 75079215273 bobsnm1 (nlb) 9) nr 75039187893 bobsnm1 (nlb) 10) se 75079260532 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086307

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/27/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079160320 bobsnm1 (nlb) 2) se 75079260266 bobsnm1 (nlb) 3) se 75079260334 bobsnm1 (nlb) 4) se 75079216317 bobsnm1 (nlb) 5) se 75079218250 bobsnm1 (nlb) 6) nr 75039160780 bobsnm1 (nlb) 7) se 75079260471 bobsnm1 (nlb) 8) er 75029260179 bobsnm1 (nlb) 9) nr 75039187725 bobsnm1 (nlb) 10)se 75079260389 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against srl. no. 01 to 10. ii) wagons srl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :45015345

21 May, 2026 NA

Kapurthala - Punjab

Tender For supply of complete pre-fabricated driver desk along with mounting frame, front cover between driver desk and nose cone, housing all the necessary equipment and driver/ guard seat, master cum brake controllers per clause 3.18 of specification no. icf md spec-408, issue status-01, rev-01, cab recording equipment as per clause 3.36 of specification no. icf md spec-408, issue status-01, rev-01along with termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories, including horn & sun visor. (one set per dtc) note: cab radio shall be provided by ir for sections with gsm-r [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45049729

19 May, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of adjustable lever assembly for door operating mechanism of bogie open rapid discharge hopper wagon type bobrn as per rdso drawing no.: wd-92081-s-59, alt-8, item no: 1 to 7 and 11 in assembled condition. material and specification as per drawing. as per drg.no. wd-92081-s-59 specn:as per drawing [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45031656

15 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of rolling stock - u/s and condemened overage coach (1.) coach no.-82901, type-gs, railway-wcr, built year-1982. (2.) coach no.-890010, type-rh, railway-wcr, built year-1989. for stock holder sse/c&w/g/kota. hq breakup order no.01/2026 vide hq letter no-wcr/m/c/02/705 dt.06.03.2026. sr.dme l.no.-m.100/2 vol.-1 dt.13.03.2026. (a)list missing items- nill (b) per bogie reclaim items list:-a.bogie items:-1-complete trolly=02 nos. including following items. 1.1-wheel set with axle box, roller bearing and dynamo pulley=04 set+1, 1.2-axle box spring=16nos and bolster spring=08nos, 1.3-brake gear fittings=all items intact, 1.4-bronze wearing piece=04nos(not visible), 1.5-bolsters=02nos, 1.6-suspension link=16nos, 1.7-wearing plate=04nos(not visible), 1.8-l.s.beam(plank)=04nos, 1.9-equalising stay with pin=04nos. total reclaim weight-12.00mt. note:-only rru 4.5kw=01 nos(03 kg) reclaimed in 890010/rh bogie is in excess.as per reclaim list. coaches will be sold and handed over as is where is basis. purchaser has to arrange all safety equipment like fire extinguishers for ensuring safe working condition. at the time of delivery all items including zero value items such as like glass, pvc sheet, rubber, fiber, ply etc to be completely cleared from the location. purchaser should clear the site before final delivery. all reclaimed material must be return to be concern sse at his section in good condition. other than melting scrap if found during cutting & loading will be seperated & not delivered. purchasers are requested to see the lot/site and approchable road before bidding. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by nos only. cutting allowed for easy loading. material lying in rajasthan state.

Central Government/Public Sector

CTN :45031657

15 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of rolling stock - u/s and condemened overage coach (1.) coach no.-00102, type-wgaccn, railway-wcr, built year-2000. (2.) coach no.-98116, type-wgaccn, railway-wcr, built year-1998 with availbale ferrous-non ferrous excluding reclaim items. for stock holder sse/c&w/g/kota. hq breakup order no.01/2026 vide hq letter no-wcr/m/c/02/705 dt.06.03.2026. sr.dme l.no.-m.100/2 vol.-1 dt.13.03.2026. (a)list missing items- nill (b) per bogie reclaim items list:-a.bogie items:-1-complete trolly=02 nos. including following items. 1.1-wheel set with axle box, roller bearing and dynamo pulley=04 set+1, 1.2-axle box spring=16nos and bolster spring=08nos, 1.3-brake gear fittings=all items intact, 1.4-bronze wearing piece=04nos(not visible), 1.5-bolsters=02nos, 1.6-suspension link=16nos, 1.7-wearing plate=04nos(not visible), 1.8-l.s.beam(plank)=04nos, 1.9-equalising stay with pin=04nos. total reclaim weight-12.00mt. b.toilet fan-04+03=07nos and total weight-1.6+1.2=2.8 kg(in both bogie) as per reclaim list. coaches will be sold and handed over as is where is basis. purchaser has to arrange all safety equipment like fire extinguishers for ensuring safe working condition. at the time of delivery all items including zero value items such as like glass, pvc sheet, rubber, fiber, ply etc to be completely cleared from the location. purchaser should clear the site before final delivery. all reclaimed material must be return to be concern sse at his section in good condition. other than melting scrap if found during cutting & loading will be seperated & not delivered. purchasers are requested to see the lot/site and approchable road before bidding. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by nos only. cutting allowed for easy loading. material lying in rajasthan state.

CTN :45031617

06 May, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no. sse/cs/2025-26/39, srl no.[1] tie bar with hanger of pbu/tbu loco, qty-36 sets, wt-4320 kgs, srl no.[2] adjusting plate bottom of pbu/tbu loco, qty-100 nos., wt-1112 kgs, srl no.[3] hanger lever (kbil/ftil make), qty-72 nos., wt-907.20 kgs, srl no.[4] wheel set guide, qty-10 nos., wt-241 kgs, srl no.[5] brake equalizer assly. qty-10 nos., wt-113 kgs, srl no.[6] brake head assly, qty-20 nos., wt-120 kgs, srl no.[7] brake hanger lever end, qty-10 nos., wt-193 kgs, srl no.[8] miscellaneous (liners, pins, bushers, link, friction arm, fasteners, brake equalizer plate, washers, cotter pins, turnion clevis, arm spring, adjusting equipment, spacer, tie bar, equalizer, hanger inside & outside, nut bolt, safety sling, threaded bolt¿ etc.), wt-1000.80 kgs, approx. total ferrous weight-8007 kgs

CTN :45025483

07 May, 2026 NA

Jamalpur - Bihar

Tender For supply of air brake equipment for detc/us(with electrictransmission)coaches to schematic drg no. (231) detc/us 3-5-005, alt-c and to schedule no.icf/sk-10-2-342,issue status-01,rev.04 [ warranty period: 30 months after the date of delivery ]

Adjustable Lever Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector