Latest adjusting shim Tenders | Government adjusting shim Tenders

Central Government And Public Sector

CTN :40810170

08 Jul, 2025 NA

Bilaspur - Chhattisgarh

Tender For installation, testing and commissioning of following items (with supply)- (i)-mpcb for blower motor of lhb ac coaches, 3pole, 4 amps, range: 2.4- 4 a, voltage 415v, 50 hz with 1 no + 1 nc auxiliary contact, breaking capacity 50 ka, din rail mounting, confirming to is/iec. = 02 nos. for one coach. (ii)- str anded annealed tin coated copper conductor, 1.5 sqmm e-beam irradiated cross linked single core cable a s per rdso specification no. elrs/spec/elc/0019 rev.4 of feb.2018 or latest, voltage: 1.8 kv. = 40 mtrs. for one coach. make:- abb, legrand, schneider, l&t, siemens, eaton [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40644581

14 Jul, 2025 NA

Barh - Bihar

Tender For corrigendum : supply of wagon tippler spares chp stage ii barh e e - sch1_100249827_10_m5530111114_apron pan trf af 1800x18150 , sch2_100249827_20_m5530111118_guide rail trf af 1800x18150 , sch3_100249827_30_m5520442694_feed roller assy af- 9560-155-pvm-b-07 , sch4_100249827_40_m5520442695_ret roller assy af- 9560-155-pvm-b-07 , sch5_100249827_50_m5530111139_plummer block 47 trf af 1800x18150 , sch6_100249827_60_m5530111140_plummer block 48 trf af 1800x18150 , sch7_100249827_70_m5530111134_plummer block drv trf af 1800x18150 , sch8_100249827_80_m5530111135_plummer block drv 43 trf af 1800x18150 , sch9_100249827_90_m5530111115_roller skeleton trf af 1800x18150 , sch10_100249827_100_m5530111116_roller bracket trf af 1800x18150 , sch11_100249827_110_m5530111117_ret roller bracket trf af 1800x18150 , sch12_100249827_120_m5530111121_head sprocket trf af 1800x18150 , sch13_100249827_130_m5530111123_apron pan support trf af 1800x18150 , sch14_100249827_140_m5503696325_gear sectors trf tippler iods 2403 , sch15_100249827_150_m5503696323_transfer beam trf tippler iods 2403 , sch16_100249827_160_m5503656127_cradle bearing trf iods-2401 2404 + /bid number : gem/2025/b/6319173 , /dated: 09-06-2025 ( ( / bid document 1 / 24

CTN :40874778

21 Aug, 2025 NA

Howrah - West Bengal

Tender For supply of adjusting shim for body support for lhb coach. drawing no. : rcf drg. no. 12 67474, ver.- 01r matl.& specn : as per drawing. [ warranty period: 30 months after the date of deli very ]

Central Government/Public Sector

CTN :40872354

25 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For improvement/up-gradation of north coaching complex washing line at lko, rebuilding of rail beam of old washing line no. 1 & 2 of lko yard and provision of fencing towards north side pathway of sadar washing line and improvement of end ramp at bsb end flooring up to c&w office including repairs to office, etc. at lko.

CTN :40187752

10 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of h nut m10 2 , washer 3 , h screw m8 40 4 , washer m10 5 , washer m8 7 , washer m12 8 , z washer 160hv 9 , locktab 10 , lock washer m8 11 , lock washer 12 , h screw m10 25 13 , schnorr washer 14 , o ring 16 , o ring 19 , o ring 20 , insulator 21 , ball bearing 22 , h screw m6 18 23 , h screw m6 25 24 , h screw m8 20 25 , h screw m8 22 26 , h screw m6 18 27 , h screw m10 25 28 , set of nut locking 29 , loctite 243 nut lock 31 , washer 32 , o ring 33 , centering pin 39 , diode sector 40 , ring n305 d nom m10 41 , direct diode 42 , reverser diode 43 , ballast resistor 44 , set of rectifier cowl seals 45 , gasket 49 , nozzle 51 , locktab 58 , locktab 59 , centering pin 60 , screw 61 , centering pin 63 , stop pin 64 , double locktab 65 , stop ring 66 , nut 67 , double locktab 68 , double locktab 69 , double locktab 70 , double locktab 71 , double locktab 72 , locktab 73 , screw 74 , centering pin 75 , shear washer 76 , gasket 77 , compressor nose 78 , schnorr washer 79 , fuse plug 160 80 , lock washer 81 , adjusting shim 82 , double locktab 83 , double locktab 84 , impeller nut 85 , pin 86 , stop ring 87 , washer m5 88 , washer 89 , washer 90 , lock tab 91 , washer 92 , lock washer 93 , centering pin 94 , stop ring 95 , stop ring 96 , gasket 97 , bush 98 , seal piston o ring 99 , seal piston 100 , bearing piston 101 , washer 102 , cylinder o ring 103 , shaft bush 104 , pin 105 , snap ring 106 , washer z18 107 , cotter pin m 12 15 109 , washer 111 , gaflex metal torus 113 , washer 114 , washer 115 , locking screw 116 , washer 117 , washer 118 , gaflex seat 119 , esn nut 120 , washer 122 , washers 123 , washer 124 , washer 125 , o ring 126 , o ring 127 , washer 128 , industry lithium button cell 3v 48mah 2 5mmx12 5mm 131 , gasket 132 , circlips 133 , back up battery for supervision monitor mp270 134 , seal and friction washer 135 , seat 136 , lock washer 137 , o ring nitrile 138 , ring ptfe guide 139 , upper bearing polymer 140 , o ring upper nitrile 141 , spacer ring upper polymer 142 , steel pin 143 , o ring nitrile 144 , spring retaining ring upper s steel 145 , upper support washer 146 , spacer ring lower polymer 147 , lower bearing polymer 148 , guide ring polymer 149 , o ring lower 150 , lower support washer chemical resistant polymer 151 , spring retaining ring lower s steel 152 , nitrile seal 153 , nitrile seal 154 , ring nitrile galvanized steel 155 , nitrile seal 156 , o ring nitrile 157 , spring s steel 158 , washer m20 159 , gasket 59x69x3 4 161 , dilatation absorber for diesel engines exhaust pipe 162 , spring washer s steel 316 163 , bearings nylon tfe 164 , ring tfe aft 165 , connection seal tfe 166 , viton rod gland 167 , seat series 7644 nylatron 168 , seat ring viton 169 , ring nylatron stop 170 , seals kit bv htb dn65 fb 171 , gasket 55x43x2mm 172 , bypass valve p3h p1 dn50 173 , tapered spring 174 , valve spring 175 , spring pin e5x50 176 , o ring 29 74x3 53 an22 nbr 80sh 177 , filter element f1547 a 178 , actuator 179 , maintenance kit 180 , shouldered ring 181 , fixation ring 182 , fixation plates 183 , o ring 47 35x1 78 64c8 184 , diaphragm 185 , gasket 186 , counter weight 187

Central Government And Public Sector

CTN :40873660

22 Jul, 2025 NA

Bangalore - Karnataka

Tender For manufacture, supply and installation of cross beam girder (size of beam 11 meter long, cross section 500 mm height & 180 mm width approx.) of 3ton eot crane along with suitable long transverse ge ared motors 2nos as per rwf drawing no. 703402210640. note: 1. only crane manufacturers or their auth orized representatives with relevant expertise shall be eligible to participate in the tender. 2. the drawing attached is only for the general guidance. the supplier shall visit the rwf and take necessary data before c ommencing the work. 3. all raw materials necessary for the fabrication, including channels, plates, and stru ctural steel, shall be supplied by the supplier. 4. the supplier shall also be responsible for the transportatio n of all components such as the fabricated cross beam, hoist, channels, plates, etc., to the rail wheel facto ry (rwf), including both to and fro movements, and shall bear all associated transportation charges. 5. the supplier shall dismantling the existing electrical connections and the removal of the hoist assembly. proper support beams must be provided between the end carriages, and the cross beam (girder) must be carefully supported before the removal of mounting bolts. the cross beam should then be lowered cautiously to prev ent damage to surrounding equipment and shifted to the designated location. the temporary support beam for the end carriages shall be removed thereafter. 6. the supplier shall remove the existing long travel gea rbox along with its motor, and install a new gearbox and motor fitted with suitable gears and couplings. th e hoist is to be reinstalled in its original position, and all electrical connections must be restored accordingl y. once the mechanical and electrical installations are complete, the cross beam and associated structures shall be painted in yellow and black colors, adhering to standard safety norms for cranes. 7. rwf will provi de to the supplier with air, electricity, water, and welding/oxy-cutting consumables free of cost. however, t he supplier is required to supply all raw materials for fabrication and arrange all necessary tools, lifting tac kles, and handling equipment for the execution of the work. the supplier is also obligated to provide appro priate personal protective equipment (ppe) such as helmets, gloves, safety harnesses, and other safety gea r to all personnel working at the site. 8. after completion of all work, the supplier must conduct a load test of the crane and submit a valid load test certificate. throughout the execution, the supplier will be solely re sponsible for the safety of all workers engaged in the activity, and the entire work shall be carried out in co mpliance with applicable safety standards and rwf's guidelines. 9. the motor with gearbox for the lt mov ement shall have a minimum power of 1 hp, and its output speed shall be suitable to achieve an lt movem ent speed of at least 20 meters per minute. [ warranty period: 18 months after the date of delivery ]

State Government

CTN :40841890

18 Jul, 2025 NA

Kamrup - Assam

Tender For supply and installation of laboratory equipment experimental setup for fyimp ug practical classes at the department of physics, gauhati university - laboratory equipments/experiment set ups, experiment name: to verify the law of malus for plane polarised lighttechnical specifcations:i. light source: - led: 532 nm or 635 nm ( 2 nm stability), 1 5 mw adjustable output. - unpolarized (extinction ratio >500:1). - collimated beam (divergence 0.5 mrad); qty-1ii. polarizers- glan-thompson or polymer film. - extinction ratio 10 :1 @ operating wavelength.- mounted in 50 mm rotation holders.; qty-2iii. rotation stage- motorized analyzer rotation (0.05 resolution). - accuracy: 0.1 . - range: 0 360 (continuous).; qty-1iv. photodetector- silicon photodiode (400 1100 nm). - linearity: r 0.999 (0.1 w 5 mw).- digital readout: 0.1 w resolution.; qty-1v. optical bench-- anodized rail ( 60 cm) with kinematic mounts. - vibration-damping feet.; qty-1, experiment name: to determine thespecific rotation of sugar solution using polarimetertechnical requirementsa.core instrumenti. light source- - sodium d-line (589.3 nm) or tunable led ( 2 nm stability). - output stability: 0.2% drift/hour.ii. polarizer/analyzer- glan-thompson prisms or high-grade polymer film. - extinction ratio 10,000:1 at 589 nm.iii. rotation stage- motorized with 0.001 resolution.- accuracy: 0.005 .- range: -90 to +90 .iv. sample cell-- borosilicate glass tubes with precision ground ends. - path lengths: 0.5 dm, 1.0 dm, 2.0 dm ( 0.01 dm tolerance). - temperature-controlled jacket (5 50 c 0.1 c).v. detector- photomultiplier tube (pmt) or low-noise photodiode. - linearity: r 0.999 over 0.1 w 5 mw rangevi. enclosure- light-tight with vibration damping. - internal black anodized surfaces.b.measurement specificationsi. specific rotation: range: -180 to +180 resolution: 0.001 accuracy: 0.01 ii. concentration-range: 0.01 0.5 g/ml (sucrose in water) detection limit: 0.001 g/mliii. temperature control-stability: 0.1 c at 20 c (standard condition), experiment name: to determine the wavelength and velocity of ultrasonic waves in a liquid (kerosene oil, xylene, etc.) by studying the diffraction through ultrasonic gratinga.core componentsi. ultrasonic generator- - frequency range: 1 10 mhz ( 0.1% stability). - adjustable output: 0 50 w. - digital display (resolution: 0.01 mhz).ii. transducer- piezoelectric (pzt) crystal, resonant at 2 5 mhz. - liquid-coupled design for efficient energy transferiii. liquid cell- optical glass (low thermal expansion). - dimensions: 100 50 50 mm (l w h). - sealed with quartz windows.iv. light source- he-ne laser (632.8 nm, 2 mw) or sodium lamp (589.3 nm). - beam collimation: 0.5 mrad divergence.v. optical system- adjustable slit (10 500 m). - collimating lens (f = 150 mm, 50 mm). - precision rotation stage for detector (0.01 resolution).vi. detection system- photodiode/pmt detector with linear response (400 800 nm). - traveling microscope (0.01 mm resolution) or ccd camera ( 5 mp).b.measurement specificationsi.wavelength ( )range: 0.1 2 mm, resolution: 0.001 mm, accuracy: 1%ii. velocity (v)range: 800 2000 m/s (liquids) resolution: 1 m/s accuracy: 2%iii. diffraction angles- measurement range: 30 resolution: 0.01 , experiment name: to verify the stefans law of radiation and to determine stefan s constanta.core componentsi.black body radiator- cavity-type design (emissivity 0.99). - material: nickel-plated copper.- operating range: 50 c 600 c. - aperture diameter: 10 mm 0.1 mm.ii. heating system- pid-controlled furnace (0 600 c). - stability: 0.5 c at 300 c. - power: 500 w (ac 230v).iii. temperature sensor- type k thermocouple or pt100 rtd. - accuracy: 0.5 c at 500 c (nist-traceable).iv. radiation detector- thermopile sensor (spectral range: 0.3 20 m). - responsivity: 10 v/w.- active area: 10 10 mm .v optical path. - water-cooled collimating tube with baffles.- adjustable aperture to define solid angleb.measurement specificationsi. temperature range100 c 500 c (reso

Central Government/Public Sector

CTN :40827969

15 Jul, 2025 38.98 Crore

Korba - Chhattisgarh

Tender For supply of hot rolled steel beam, column, channel and angle sections (v2) conforming to is 808 , chequered plate 6mm , steel flat as per is 2062 , ms sheet as per is 1079, hot rolled, thickness 2.5mm , ms sheet as per is 1079, hot rolled, thickness 3.15mm , ismb 250x125 mm , ms plate as per is 2062 & is 1730, hot rolled, thickness-6mm , ms plate as per is 2062 & is 1730, hot rolled, thickness-8mm , ms plate as per is 2062 & is 1730, hot rolled, thickness-10mm , ms plate as per is 2062 & is 1730, hot rolled, thickness-12mm , ms plate as per is 2062 & is 1730, hot rolled, thickness16mm , ms plate as per is 2062 & is 1730, hot rolled, thickness 20mm , ms plate as per is 2062 & is 1730, hot rolled, thickness 25mm , ms plate as per is 2062 & is 1730, hot rolled, thickness 32mm , ms rail 30lbs/yd

State Government

CTN :40227801

08 Jul, 2025 49.58 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : various routine/preventive and breakdown maintenance work on as and when require basis at chp-gtps - replacement of hammer rings for stage ii crusher , replacement of hammer rings for stage i crusher , replacement of screen plate / breaker plate/kick off plate of stage i and ii crushers , replacement of rotor of stage i crusher with disassembling of removed rotor and assembling of new/repaired rotor , replacement of drive end side bearing / pedestal of crusher rotor or complete gear coupling set of crusher or repositioning of dislocated rotor of crusher , replacement of non drive end side bearing/pedestal of crusher rotor or complete alignment of crusher motor with crusher rotor , replacement of broken hammer rings of stage i and ii crushers (stage i crusher up to 12 nos.of hammer rings and stage ii crusher up to 06 nos. of hammer rings at a time) , replacement of rail of rail table of wagon tipplers 1/2/3/4 (in one side full length) , replacement of clamping rubber pads of clamp for wagon of wagon tipplers , replacement of whole resting pads for wagon of side beam of wagon tipplers , replacement of spill plate roller of wagon tipplers , repairing/preparation/ fitting and replacement of hooks/rods/turn buckle, chain, sling rope ,spring assembly etc. of vibrating trays and crusher house trays , spillage control at various locations , miscellaneous cutting/welding work require at various locations , replacement of gearbox in conveyor no. 2a/b,11a/b,12a/b,13,14/15,16a/b,17a/b ,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of gearbox in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement of slow speed coupling set (two halves) of drive pulley , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.2a/b,11a/b,12a/b,13,14/15,16a/b,17 a/b,18a/b,drc/apron/rg/,wagon tipplers,stacker-reclaimer , replacement of coupling bolts and rubber bushes of slow/high speed coupling(input/output coupling ) in conveyor no.,5a/b,8a/b,10a/b,shuttle conveyor 1/2,belt feeder 1/2 ,roller screen, mrc 3/4/5,wobbler feeder ,dribble conveyor 1/2 , replacement/removing/refitting of various size and type of fluid coupling , replacement or removing & refitting of any internal/bearing/input/ output oil seal of various size and type of gear box , overhauling of dismantles old/used gearbox in all respect with fitment of input and output coupling. , replacement of drive pulley , replacement of drive end side bearing of drive pulley or repositioning of dislocated drive pulley , replacement of non drive end side bearing/any side pedestal of conveyor drive/non drive pulley , alignment of motor/ gearbox/drive pulley including decouple/couple of coupling , nut bolt and drive system checking with replacement of broken nut bolt in all 04 wagon tipplers no.1/2/3/4 as per scope , lifting and releasing of gravity take up of any conveyor belt for locking and de locking of belts for other than belt replacement work , loosening and tightening of horizontal type screw take assembly of any conveyor belts for other than belt replacement work , work of dismantling and re erection of new/repaired apron pan from existing apron feeder of wagon tippler , repairing of upper/lower structure/cone plates of damaged/bend apron pan , replacement of carrying roller of apron feeder , replacement of worn out/ damaged ti roller and garland rollers. , replacement of worn out/ damaged impact rollers , replacement of worn out/ damaged return rollers , replacement of various worn out/ damaged ti roller stands , replacement of various worn out/ damaged impact roller stands , replacements of various worn out/ damaged return roller stands , replacement of various worn out skirt rubbers [10 m each] and skirt rubber with angle , preparation and replacement of guide rollers with bracket in place of worn out/ damaged gu

CTN :40770337

11 Jul, 2025 3.32 Crore

Mumbai - Maharashtra

Tender For supply of special nut , special washer , nut m10x1 , 25 din 934 zn , gasket , bearing spring , cylinder head assembly , pick-up assembly , nut m10x1 , 25 din 936 , screw m10x70 , connecting rod assembly , water level gauge with contact , exhaust gas manifold , water cooler housing assembly , water manifold v16t2msd assembly , exhaust gas manifold , stud bolt m10x25 , screw m10x25 uni 5931 8.8 zn , bearing spring , exhaust gas manifold , idler gear , plug , gasket , flex pipe (ex flex pipe) , nozzle bosch , blow-by filter cartridge , valves cone , stud bolt , special nut , conical washer 12x2 , 8 uni 8836 , o-ring 37 , 69x3 , 53 , o-ring 31 , 42x2 , 64 , press 0.2bar mbc5100 1211 1db04 dfoss (ex amot sw 0.17 bar) , special washer , washer , o ring 9167x353 , elsi thermocouple , sea water pump f&p ts 65 , injection pipe complete , exhaust gas manifold , stud bolt , roller tappet , blow-by filter assembly , exhaust gas manifold , heli-coil insert m12x18 , o ring 14859x533 , safety bracket , locking plate , adjusting shim

Adjusting Shim Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector

State Government