Latest adult weighing machine Tenders | Government adult weighing machine Tenders

CTN :43521424

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of supply and replacement of engine oil , supply and replacement of oil filter element , supply and replacement of fuel filter , supply and top up of coolant , supply and replacement gear oil , supply and fixing of sider rear view mirror , supply and fixing wiper control switch lever left , checking and replacement of rubber bushes of top wishbone and lower wishbone and anti roll bar , repair and cleaning of gear box assembly , supply and fixing of timing belt and timing belt idler , change vacuum hoses for vacuum modulator and turbocharger and egr valve and throttle valve , assembly of ve battery cable , supply and fix fuse box or relay and power steering reservoir , m and l for greasing of all wheel bearing and hubs , checking and replacement of all drives belts water pump, belt tensioner pulley, belt idler pulley, fan pulley, alternator pulley and steering pump and inspection free rotation damaged , repair and replacement of piston assembly , assembly of clutch kit , supply and replacement of wiper and windshield waser fluid tank. , complete check of ignition system cleaning of power formed battery connection check and provide distilled water incl cost of battery fully charging , head lamp checking and replacement of head lamp with connection wire , wheel aligment and balancing complete including settle of toe and coster angel of all wheel and addition of weight , supply and replacement of left side head light , supply and replacement of rs side indicator light ) /bid number : gem/2026/b/7095828 * /dated: 09-01-2026 & & / bid document 1 / 21

CTN :43521851

19 Jan, 2026 NA

Mumbai - Maharashtra

Tender For supply of supply and replacement of engine oil , supply and replacement of element oil filter , supply and replacement of element fuel filter , supply and top up of advanced concentrated coolant mixed at one to three ratio one litre , supply and replacement gear oil , wheel alignment and balancing complete including settle og toe and coster angle of all wheel and addition of weight , complete check and rectify hoses for clog and supply replacement of damage hoses , supply and replacement of break liner set , supply and replacement of rear combination lamp left , complete checking and repair of piston assembley , supply and fixing headlight front left 131 h l a b l l lumex , complete checking or servicing of ignition system and cleaning of powder formed, checking of battery connections , providing distilled water as reqd basis incl cost of bty fully charging , supply and fixing seat cover , cabin light checking and replacement of head lamp with connection wire , m and l for greasing of all wheel bearing and hubs , supply and replacement foot mat , over hauling clutch master and slave cylinder and replacement of clutch fluid , supply and replacement of pressure plate , supply and replacement of petrol tank locking assembly , supply and replacement of mud guard rubber flaps on all wheels , supply and replacement of wiper and pumping servicing , supply and replacement of automatic remote centre door locking system and rectification , tacking down all wheel and rotate the all tyres and complete re fixing properly , supply and replacement rear suspension , serving and labour charges ) /bid number : gem/2026/b/7094936 * /dated: 09-01-2026 & & / bid document 1 / 22

CTN :43523187

19 Jan, 2026 NA

Jamnagar - Gujarat

Tender For supply of lead acid storage batteries for motor vehicles with light weight and high cranking performance (v2) conforming to is 14257 (q3)

Central Government/Public Sector

CTN :43394444

14 Jan, 2026 1.51 Lacs

Dhanbad - Jharkhand

Tender For corrigendum : load test by ci test weight 20kg x 750 nos.(15 ton) each for quarterly testing(3 months) at 05 (five) nos.t.c check post - i and ii, kantapahri,sijua siding and gaslitand road weighbridges under katras area.

CTN :43206566

12 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

corporations/Associations/Others

CTN :43491482

14 Jan, 2026 11.30 Crore

Bengaluru - Karnataka

Tender For procurement of pre-cured tread rubber and allied materials - black vulcanising cement / universal spray compound conforming to is-15524-2018 specifications, high bond bonding gum / cushion gum 125 / 100 deg. c conforming to is-15524-2018 specifications, precured tread rubber conforming to specification is-15524-2018 (pctr sizes, type, tread width, non-skid depth, total thickness, tread length, weight per tread rubber are as per mentioned in the additional format) (note- the actual size wise quantity to be supplied on monthly basis to the divisions based on their requirement at the time of supply)

CTN :43494487

13 Jan, 2026 NA

Delhi - Delhi

Tender For supply of new light weight 775 gms jute sacking bags for packing of mustard seeds (50 kg packing)

CTN :43494488

13 Jan, 2026 NA

Delhi - Delhi

Tender For supply of new light weight 530 gms jute sacking bags for packing of pulses/oilseeds (50 kg packing)

CTN :43494489

13 Jan, 2026 NA

Delhi - Delhi

Tender For supply of new light weight 767 gms jute sacking bags for packing of groundnut with shells (35 kg packing)

corporations/Associations/Others

CTN :43495842

28 Jan, 2026 NA

Surat - Gujarat

Tender For procurement of different types of furniture for different suman schools - three seater wooden bench with desk : (5- 6 length) overall size:- 66 l x 32 w x 31 h (detail specification as per attached price bid document), cabinet steel with glass door - big : size: 1980 h x 915 w x 485 d mm (detail specification as per attached price bid document), table steel -big [1680mm x 870mm x 760mm (66 x 34)] (detail specification as per attached price bid document), table steel -small [1370mm x 760mm x 735mm (54 x 30)] (detail specification as per attached price bid document), chair steel cane with handle :size (approx.): 885h x 430w x 570d in mm. (detail specification as per attached price bid document), revolving high back chair :size:- 650w x 650 d x 1050 to 1175 h in mm. (detail specification as per attached price bid document), computer revolving chair :- (detail specification as per attached price bid document), 3-seaters visiters chair with cushion : (heavy & good quality)(detail specification as per attached price bid document), computer table : (good quality) (detail specification as per attached price bid document), cupboard steel - big : (1980 h x 915 w x 485 d in mm) (detail specification as per attached price bid document), cupboard steel - small : (1565 h x 760 w x 430 d in mm)(detail specification as per attached price bid document), rack steel - big : [1981 h x 914 w x 375 d in mm](detail specification as per attached price bid document), cabinet industrial drawer -12 locker. : size :- 1980mm (h) x 915mm (w) x 485mm (d) approx. (detail specification as per attached price bid document), plastic moulded chair :weight. 2.50 kg. (minimum) brand-nilkamal,cello,supreme,prima. (detail specification as per attached price bid document), chair - supreme ornate with arms : (detail specification as per attached price bid document), plastic stool : weight. 0.840 kg. (minimum) , brand-nilkamal,cello,supreme,prima. (detail specification as per attached price bid document)

Adult Weighing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others