Web Analytics Made Easy - StatCounter
GeM Registration
Advance Search

Aerial Maintenance Platform Tenders

Get complete information related to latest Aerial Maintenance Platform Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aerial Maintenance Platform Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aerial Maintenance Platform Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Get Tender in Email

CTN :43521693 Due date: 30 Jan, 202630 Jan, 2026 NA
Location: Multi City - Multi State Multi City - Multi State
Tender For supply of mob trolley mounted 4-6 mm carbon steel fabrication fully welded leak proof 5 kl fuel bowser for safe transport, storage and dispensing capacity 5000 ltr under job no 0175 oblique 25-26 , manhole 400-500 mm dia with bolted cover venting sys- flame arresting breather vents pressure- vacuum type filling point - 3 inch or 4 inch anti-splash port with lockable cap , 1 inch ball valve for fuel drain , heavy duty steel chassis of overall length 4.5 meter, width 1.9 meter and height 1.8 mtr payload and gross vehicle mass 7000-10000 kg with landing jack 10000 kgs capacity , dual axle configuration wheels oblique tyre-heavy duty rated tyres e.g. 235 oblique 85r16 incl suspension leaf spring or rubber torsion braking system-pneumatic air break breakaway sys , spare wheel 235 oblique 85r 16 standard , landing oblique parking jack, wheel chocks and holders, reflective tape and hazard marking , pump type diesel oblique petrol compatible positive displacement or centrifugal flow rate 20 - 40l oblique min standard, drive type 12v oblique 24v dc motor petrol engine as per store list attached , antistatic fuel hose of length 8 mtr x 3 oblique 4 inch dia, and nozzle automatic shutoff oblique manual with digital flow meter , emergency stop switch, fire extinguisher 2 x 9 kg dry chemical powder, earthing cable and bonding point, anti-static bonding strap, pressure relief valves. , lighting for trailer, indicators, brake lights and tail lamps , spare tools spanner de open jaw 30 x 32, ring spanner 30 x 32 plier side cutting, tyre lever, screw driver, hammer 200 gm, tester and oil can each one as per store list attached , documentation and certificate. material test cert, pressure and leak test cert, welding procedure and welder qualification records, roadworthy cert records, roadworthy cert as per store list attached ) /bid number : gem/2026/b/7096356 * /dated: 09-01-2026 & & / bid document 1 / 16

CTN :43504134 Due date: 17 Jan, 202617 Jan, 2026 NA
Location: Ranga Reddy-T - Telangana Ranga Reddy-T - Telangana
Tender For conduct of swarm drone fabrication, assebmly, op handling & maint trg for troop with course material

CTN :43049074 Due date: 12 Jan, 202612 Jan, 2026 19.41 Lacs
Location: Delhi - Delhi Delhi - Delhi
Tender For bid to ras supply of dental exp items - pn 1363 , finishing burs diamond tf 12ef , finishing burs diamond tr 12ef , finishing burs diamond tf 13ef , finishing burs diamond tf 21ef , finishing burs diamond tr 14ef , modified shoulder diamond burs 1 mm dia , round end cylindrical diamond burs 1 mm dia , dpi impression paste , torpedo shaped diamond burs with 1 point 8mm , torpedo shaped diamond burs with 1 point 2mm , beveled cylindrical diamond burs with 1 point 2mm , beveled cylindrical diamond burs with 1 point4 mm , ceramic finishing kit , straight h p dental stone burs white small , straight h p dental stone burs red small , dpi green stick , gingival retraction cord 0 , gingival retraction cord 00 , gingival retraction cord 000 , teeth preparation diamond point bur kit of 14 burs , polycarboxylate cement , nitrile non sterile gloves medium m , zirconia finishing and cutting disc , sintered diamond bursintered abrasive diamond disc fine grift , sintered diamond bursintered abrasive diamond flame shaped fine grift , sintered diamond bursintered abrasive domed cylinrical fine grift , dfs carbide cutter sintered abrasive diamond tappered flatfine grit , tooth moulding powder shade a bott of 55gm , tooth moulding powder shade b bott of 55gm , tooth moulding powder shade c bott of 55gm , tooth moulding powder shade d bott of 55gm , componeer kit , tissue punch set of 05 , dual core lutting resin paracore , relay x luting plus resin modified glass ionomer , temporary cement non eugenol rely x temp ne , non eugenol temporary cement , protemp temporization material shade a1 , direct opaque , espe astringent retection paste capsule , silance coupling agent , porcelain etchant 10 percent hydro fluric acid sys of 2 point 5 gm , double cone occlusal reduction 148 iso 032 , soft reliner intro kit dark pink , soft putty with light body , self cure resin cement , silacone duplicating material doublident , ceramic repair n system kit , gc reline ii soft auto mix chair side silicone material for relining retentive kit , hy bond glass ionomer cx 1 to 1 set containing powder 45gm and liquid 25ml pn 1190 , mira tray set of 06 , silicone for flexible gingival mask , soft liner tissue conditioner , dispensing tips for gingival mask , micro tips for gingival mask , tray adhesive , pattern resin gc , end cutting finishing bur , pinnacle brown impression compound orthokal pkt of 05 , medium body elastomeric impression material densply , disposable tips for silicion impression material , plastic perforated impression tray , dental posterior bile registration 50pc tray triple trays dental impression disposible , edentulous impression tray metal non perforated , disposable matrix band with handle , non eugenol zinc oxide pastecavex , die stone type 4 thixotropic blue colour , die stone type 4 thixotropic brown colour , hard wax pink cavex , flex rpd finishing kit , investment powder for cast partial denture fabrication pkt of 400gm wirovest bego , begosol investment liquid he 1000ml , maarc reinforcement mesh golden 10 pieces per packs , chairside special resin for relining and pick up of the implant supported dentures qu resin articulating paper, 100 pkt of 300 strips, fiber post para post fiber white parallel pf-160, beading and boxing wax, ceramic primer, ab dent o ring metal waving ortho silicon ring & cap, ab dent psa metal caps 5mm, height 3. 2mm, ab dent castable abutment with titanium base, np alloy adjustment kit, permanent soft liner mollosil, silicone soft denture retaining material(supplied as automix system), overdenture attachment set consist of a) previcliox r blue set x 03 b) previclix post rct x 10 c) revaxscreawdrive x 01 d) previclix rc dentist x 01 e) //bid details2 / 76

CTN :43206566 Due date: 12 Jan, 202612 Jan, 2026 NA
Location: Ferozepur - Punjab Ferozepur - Punjab
Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

State Government

CTN :43467490 Due date: 13 Jan, 202613 Jan, 2026 NA
Location: Delhi - Delhi Delhi - Delhi
Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Central Government/Public Sector

CTN :43458855 Due date: 20 Jan, 202620 Jan, 2026 NA
Location: Tiruchirappalli - Tamil Nadu Tiruchirappalli - Tamil Nadu
Tender For fabrication and supply of pressure part tubular products (panels, coils and loose tubes) for sccl singareni through ovm route with vendors material (ovm)

CTN :43461722 Due date: 20 Jan, 202620 Jan, 2026 11.00 Lacs
Location: Bagepalli - Karnataka Bagepalli - Karnataka
Tender For tractor engine capacity cc 2858 or above type of fuel diesel vehicle emission compliance bharatstage tremiiia max engine power 39hp engine rp mat maxpower 1800 maximum enginetorque nm 180 engine rp mat maxtorque rpm 1200 power take off pto type transmission maximum pto power hp 36 72 rp mat maximum pto power 1800 operator station 800 engine aspiration system open station engine cooling natural fuel in jection water cooled fuel tank capacity ltrs inline length of tractor body mm 55liter width of tractor body mm 3770 millimeter ground clearance mm 1725 millimeter wheel base mm 410 millimeter size of front tyre with plyrating mm 1960 millimeter size of rear tyre with plyrating mm 6 00 x 168pr track width front mm 13 6 x 2812pr track width rear mm 1280 millimeter tractor transmission system 1360 millimeter number of forward gears setting partial constant mesh type of wheeldrivetwo wheel drive drive axle rear type of steering manual tractor brake dry discbrake type of clutch dry clutch clutch operation single lifting capacity at hitch point kg 1200kilogram turning radius mm 3600millimeter trailer type of trailer semi trailer singleaxle type of platform tipping platform capacity of trailer 5 tonnes type of axle assembly class b axle assembly wheeltrack mm 1500 number of wheels 2 operating pressure 13 8 tipping angle of body indegrees incase of tippingtype 42 5 dimensions overall width of trailers between extreme points meter 1 83 meter overall length of platform 3 05 meter overall height of trailers with tyre inflated from the supporting surface ground to top of platform meter 608 inch overall height of trailers with tyre inflated from the supporting surface 0 915meter ground clearance mm 300 meter construction parameters material used for fabrication of trailer as per clause 5 table 1ofis 8213 latest yes reto reflective marking tapesas per ais 090 yes lighting and lighting signalling device as perais 0 62 yes trailers shall be fitted with rear under run protective yes device rupd confirming to 4812 latest yes trailers shall have service and parking brake as perais 043 nomaximum load transfer from trailer to load toweye of trailer yes 20percent of trailer capacity isi marked ismc channel used for fabrication of chassis and frame mounting on chassis yes no of spring leave splates fitted nos 1 lashing hooks for towing download yes no of hooks 8 type of towing device paintedcolouronthetrailersasper ais 112 red one coat of red oxide and 2coat of super synthetic enamel paint yes the price should include the insurance and registration charges of the vehicle

Central Government/Public Sector

CTN :43147387 Due date: 15 Jan, 202615 Jan, 2026 NA
Location: Golaghat - Assam Golaghat - Assam
Tender For corrigendum : design, engineering, procurement, fabrication, inspection, testing, transportation, and supply of rising stem ball valves as per material requisition for numaligarh refinery limited, golaghat, assam, india

Central Government / Public Sector

CTN :43504340 Due date: 19 Jan, 202619 Jan, 2026 NA
Location: Multi City - Multi State Multi City - Multi State
Tender For supply of set of 21 items for fabrication of lhb fiat bogie frames. ( for one bogie frame) material specifications and dimensions as per enclosed drawings only. each item description, quantity and drawing numbers are mentioned in annexures (attached in documents). [ warranty period: 30 months after the dateof delivery ]

corporations/Associations/Others

CTN :43487189 Due date: 17 Jan, 202617 Jan, 2026 NA
Location: Hyderabad-T - Telangana Hyderabad-T - Telangana
Tender For supply of fabrication and erection of isa, ismc, ismb or any other cross section of ms e250 grade a of is 2062-2011 , fabrication and erection of stainless steel sections including cutting, welding by gtaw process, drilling, handling, shifting of material as per working documentation and site requirement , erection of stands or local control panel or consoles or fabricated supports either by welding to eps or by anchoring wall or floor concrete or bolting to supports , manual welding on carbon steel and stainless steel equipment and components using gtaw process. , manual welding on carbon steel and stainless steel equipment and components using smaw process. this include similar and dissimilar welding of fillet joint configuration of various weld size. , erection and dismantling of scaffolding-erection of scaffolding using standard ms pipes cross support , core cutting of holes upto dia 200 mm of various depths in reinforced concrete walls or slabs , core cutting of holes above dia 200 mm of various depths in reinforced concrete walls or slabs , drilling of holes upto dia 200 mm of various depths in concrete block walls or brick , drilling of holes above dia 200 mm of various depths in concrete block walls or brick , items of dia upto 40 mm , items of dia above 40 mm upto 60 mm , field survey transferring and marking the grid location in x,y and z axis using total station in main plant building as and when required.
 Loading, Please wait...

Connect us via What's Up