Latest aerobic mats Tenders | Government aerobic mats Tenders

Central Government/Public Sector

CTN :45424412

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of (1)control arm lower right to drg no.aaa02028 alt'd' - 4 nos, (2)control arm lower left to drg no. aaa02027 alt'd' - 4 nos, (3)contorl arm upper to drg no aaa02026 alt'j' - 8 nos. (these three items form one set). special condition : 1. each item to be properly wrapped in biodegradable transparent plastic sheet to avoid water ingress. 2. the items should be separated by using suitable eco friendly cushioning material to protect machined portion from damage & rubbing. 3. all machined surface shall be protected from corrosion as per rcf spec. md.44121 dt.19.04.2011(para 1). 4.items to be stacked properly in sturdy wooden boxes, which can be handled by fork lift/crane. 5. control arm upper 8nos. in one box and control arm lower 8 nos. (4 left and 4 right) in one box. 6. label with details of description of item, drg. no., quantity, po no., pl no., and name of the supplier, etc., to be affixed on the pallet. infrastructure requirements shall be as per mdts-241 rev.02 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45410518

16 Jun, 2026 NA

Multi City - Multi State

Tender For supply of electrical item c c - bore bent to shape as required at site , supply and fixing of sub main wiring with three core 1.5 sqmm multi stranded copper conductor pvc insulated unsheathed frls cable 1100 volts grade , supply and fixing of solar street light fitting 12 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and fixing of solar street light fitting 16 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and fixing of solar street light fitting 20 watt having high efficiency mono crystalline solar pv module, lithium ferro phosphate battery with in-built bms technology, high efficacy led , supply and errection in replacement of steel tubular swaged pole 8.5 m long type 410-sp-22 complete with cl base plate , m and l for pcc 1-3-6 type c2 using 40mm graded aggregate crushed stone aggregate as in pole foundation, filling and mass concrete complete all as specified and directed. , m and l for plain cement concrete 1-2-4 type b1 using 20mm graded stone aggregate , supply of paint and painting of steel pole swan neck type or straight type up to 9 mtr height with two coat of aluminium paint after scratching out old paint , supply, erect and commissioning of high galvanized mast light of height 15 mtr, suitable for 6 to 9 lantern symmetrically fitted along with their control gear , m and l for boring of horizontal hole under road, pavement, hardstanding suitable for passing through upto 50mm bore complete all specified and directed. , replacement of unserviceable wire by cable from junction box to light fitting fixed on pole on existing pvc conduit by pvc insulated unsheathed copper conductor frls of 1.5 sqmm three core. , supply of laying and digging excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc , returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed , supply of digging and laying removal of excavated material by surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point , supply and laying sand in trenches for protection of cable, sand cushioning to cable 8 cm thick below cable and 15 cm thick above cable in layers complete all as specified and as directed , supply and lay fly ash bricks best quality, laid in trenches, perpendicular to ug cable for cable protection complete all as specified and directed , laying only old bricks obtained from item no 13 perpandicular to ug cable for cable protection complete all as specified and directed. //bid details 2 / 35

Central Government/Public Sector

CTN :45393085

18 Jun, 2026 NA

Mysore - Karnataka

Tender For supply of set of folding seat and back rest in guards room to drg no. lwlrrm- 6-4-014, alt- a, item no. 1 & 2. cushioning material shall pu foam as per rdso specification no.rdso/2007/cg04,rev-01 or latest. note: firm has the option for offering seats and berthscushion with lower density conforming to spec.rdso/2007/cg-04, rev-01 or latest also. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45397010

23 Jul, 2026 NA

Mysore - Karnataka

Tender For supply and installation of one coach set of seats and berth for lwaccn coaches to drg.no. 645-6-1-001, alt-a, except item-36, with upholstery colour alnac-03. cushioning material shall pu foam as per rdso specification no.rdso/2007/cg-04, rev-01 or latest and upholstery to rdso spec.rdso/2008/cg-07 rev-01 or latest. for thickness of cushion refer drawing lwaccn/eog-6-1-034,alt-b. installation required as per arrangement drawing. all necessary hardwares required for installation is under scope of the supplier. note: firm has the option for offering seats and berths cushion with lower density of 65 plus or minus 5 kg/m3 conforming to spec.rdso/2007/cg-04, rev-01 or latest also. [ warranty period: 120 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45365822

19 Jun, 2026 39.99 Lacs

Bikaner - Rajasthan

Tender For repair to security lights panels dg sets fire alarm ups with covered items at af stn bikaner under ge (af) nal - excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5m depth, getting out the excavated earth, forming bottom surfaces to required gradient complete all as specified and directed by engineer-in-charge., removal of excavated material soils to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5m above the startly point complete all as specified and directed., returning filling in, including spreading, levelling watering and well ramming in layers n exc 25 cm as in any type of soil complete all as specified and directed., material and labour for sand cushioning using dry and clean tibba sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed. note : punned thickness shall be measured for payment., material and labour for un-reinforced pre-cast concrete cable covers, class lv type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed., taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 6 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 2 core, 10 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 4 core, 16 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 25 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 35 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, taking out defective cable xlpe/pvc sheathed 1100 volt grade heavy duty armoured with aluminum conductor 3.5 core, 50 sqmm from trenches complete all as specified and directed.note : excavation and earth work shall be measured and paid for separately under relevant item, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 6 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge , supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 2 core 10 sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 4 core 16 sqmmlaid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by engineer-in-charge, supplying, laying, jointing and testing of under ground cable xlpe insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 25 sqmm laid in trenches/duct/pipe inc

Central Government/Public Sector

CTN :45375193

20 Jun, 2026 NA

Khadki - Maharashtra

Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo

Central Government/Public Sector

CTN :45335328

29 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply and installation one coach set of seats and berths with hardware for lws pp coach to drawing 754-6-1-001, col-1, alt-b (except item 10,11,12,13,37 and related fixing hardware in col-i)cushioning material shall be pu foam as per rdso specification no.rdso/2007/cg 04, rev-01 or latest and upholstery to rdso spec.rdso/2008/cg-07 rev-01 or latest. note: firm has the option for offering seats and berths cushion with lower density of 65 +/-5 kg/m3 conforming to spec.rdso/2007/cg-04, rev-01 or latest also. colour of upholstery, aluminium tub, aluminium moulding and frames shall be as per letter no.md/dd/lhb/103ab dated-07.10.2025 upholstery sample to be submitted to icf design for approval of colour. installation required as per arrangement drawing. all necessary hardwares required for installation is under scope of the supplier. please visiticf vendor portal for downloading drawing https://vp.icf.gov.in/vendtendordetnew.php using key:0726t9mdh702123 [ warranty period: 120 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45337152

04 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply and installation of coach set of seats and berths for lscn/bw2 coach to drawing lscn/bw2(753)-6-1-001, alt -nil, col-01 (except item 25,26,27 and respective hardware for fitting). 1. cushioning material shall be pu foam as per rdso specification no.rdso/2007/cg04, rev-01 or latest and upholstery to rdso spec.rdso/2008/cg-07,rev-01 or latest. 2. installation required as per arrangement drawing. all necessary hardwares required for installation is under scope of the supplier. note: firm has the option for offering seats and berths cushion with lower density of 65 plus or minus 5 kg/m3 conforming to spec.rdso/2007/cg-04, rev-01 or latest also. (warranty period : for pu foam-upto 120 months from the date of fitment, for vinyl coated upholstrey fabric - upto 54months from the date of supply or 48 months from the date of fitment whichever is earlier.) [ warranty period: 36 months after the date of delivery ] ]

CTN :45298008

11 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh multistran

CTN :45265802

11 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of set of seats and berths for lhb ac hot buffet coaches , as per set list no. mcfsblwcbac version 01 , cushioning material and other conditions shall be as per annexure-a1 of mcf/design letter no. rbl md 33810 dated 29.05.2024 follow colour shade alnac-03 for upholstery and ral-9006for powder coating of the visible metallic portions of seat & berth. note: 01 mm thick corrugated sheetto be used as per specification is:513-2008, grade cr-1 instead of compreg panel. packing instructionno. mcfpi117 ver. 0.0 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Aerobic Mats Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector