Get complete information related to latest Aeroplane Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aeroplane Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aeroplane Tenders.
Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to b, c & d type quarters at jeevanbhimangara, bengaluru from august 2026 to july-2027. (reserved for sc)- item description: cleaning of water storage tank or sump by following method: (1) empty the tank/ sump and make it to near dry, (2) apply bleaching powder uniformally (@ tank capacity x 0.5 gms/litre) inside the tank/ sump and wait for one hour, (3) after one hour, clean/ rinse the tank/ sump with fresh water. repeat the process (2) & (3) for two to three times, all complete, as directed by the engineer-in-charge. , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150mm dia upto 300mm , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 110mm dia., 6 kg/sqcm & class 3 , item description: providing pvc ringtite pipes conforming to is 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of pvc pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per iss (contractor will make his own arrangements for procuring water for testing) etc. complete for: pvc pipes 90mm dia., 6 kg/sqcm & class 3 , item description: constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensi
Tender For annual maintenance & supply of materials, plumbers, carpentors to jmfc court hall, k r puram from august-2026 to july-2027- item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of engineer-in- charge. , item description: cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction m³ jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150mm dia upto 300mm , item description: cleaning seftic tank of 100 users capacity as per details and instructions. (while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing solid plastic seat with lid for pedestal type w.c. pan complete : white solid plastic seat with lid , item description: providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour. - 20 mm nominal bore, weighing not less than 40 g , item description: providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour. - 25mm nominal bore, weighing not less than 62 g , item description: providing and fixing unplasticised pvc connection pipe with brass unions : 45 cm length - 20 mm nominal bore , item description: providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity-coloured , item description: providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m s
Tender For providing and fixing of various necessary electrical material on rental basis for temporary lighting on the occasion of various religious cultural national programs for the year 2026-27-description of items: watertight halogen lamp (1000/500 watts)—including temporary wiring and service line; led light fitting (120/150/200 watts)—including temporary wiring and service line; emergency generator set (5 kw)—including fuel, operator, and changeover switch; emergency generator set (7.5 kw)—including fuel, operator, and changeover switch; emergency generator set (15 kw)—including fuel, operator, and changeover switch; emergency generator set (25 kw)—including fuel, operator, and changeover switch; emergency generator set (63 to 100 kw) with canopy—including fuel, operator, and changeover switch; strip series lights; sound system—including horn speakers, cassette/cd player, microphone stand, control box, operator, and other accessories; tower lamp (20 ft height)—with led fittings (10/12 units, 250/300 watts) and temporary wiring; colored tube lights; colored led par lights; china series lights; podium—including microphone stand and microphone cable; pipe series lights; led flood light fitting (150/200 watts)—white; led flood light fitting (150/200 watts)—colored; fans (pedestal and ceiling); medium-sized air cooler; bulb holder (100 watts) / led bulb (30 watts); led tube light strip (28 watts); service line; led screen (size: 8x10 ft); projector with screen; extension board (6 amperes). 3-switch socket, 16 amp power plug, switchboard, microphone, dais, sharpie light
Tender For supply of various items of lab equipments for govt. p g college guna district guna (m.p.) under p m usha pariyojna 4th call - supply of various lab equipments items for govt. p g college guna district guna (m.p.) 4th call, waterand soil testing analysis kit (digital) : range ph 0 to 14.00 resolution ph 0.01 accuracy ph 0.01 1 digit temp. comp. 0 to 100 deg. c., water bath (06holes) : 6 hole8 ltrs., waterbath(12holes) :12 hole 20 ltrs., water distillation apparatus(single distillation unit 2 litre/hour) : single distillation 5 litres, analytical balance : least cosunt 0.0002g, analytical weight box : 1-100g, fractional weight box : 1-500mg, physical balance : 250gm accuracy 0.1g, digital balance : least count 1mg, single pandigital balance : 0.1mg 200g, digital photoelectric colorimeter : 8 filter,1 ml, digital potentiometer : with hot plate and electrodes, digital conductometer : with cell 1cc and 0.1cc, d.o. meter : polarographic do range: typically 0 to 90 mg/l (milligrams per liter) or 0 to 600% saturation.rdo (optical) do range: usually 0 to 50 mg/l or 0 to 500% saturation., digital naphelo/turbidity meter : digital turbidity cum nephelometer range:-, 200,1000 ntu/jtu resolution:- 0.01 ntu/jtu accuracy:- 3% fs, 1digit display:- 3 digit 7-segment led light source:- ir led detector:- photodiode sample system:- 60 x 25mm clear glass test tubes power:- 230 v 10% ac, 50 hz accessories:- test tube set of 2, operation manual, dust cover, polarimeter half shade : the specific rotation ( ) is a physical property defined as the optical rotation at a path length of 1 dm, a concentration of 10 g/l, a temperature (usually 20 c), and a light wavelength (usually sodium d line at 589.3 nm), melting point apparatus :melting-point measurement range: room temperature - 400 c setting rate of the starting temp. : 50 c~400 c 5 min; 400 c~50 c 7 min minimum digital display: 0.1 c size of the capillary: 1.4mm (outside diameter) 1.0mm (inside diameter), 90mm equipped with color camera and color monitor to observe melting point with ease validation program for standard samples 8 operator names can be storedgraphic lcd display to display all test parameters & test instructions, digital melting point apparatus :melting point measurement range : ambient to 300 deg c starting melting point temperature : settable from 50 to 300 deg c heating time : 3 minutes (up to 300deg c) cooling time : 5 minutes (from 300 deg c) accuracy : +/ 0.5 deg up to 200 +/ 0.8 deg from 200 to 300 temperature display resolution : 0.1 deg c rate of heating (deg c per minute), abbe refractometer : safety bs en 60950-1:11/2006 emc en 55024 : 10/2003 en 55020 : 11/2005, tlc kit : outstanding standardization and quality control exceptional adherence, hardness and surface homogeneity. analyzing samples with high matrix- load without sample preparation. multiple samples analyzed in parallel.highly cost-efficient, fast and economical, centrifuge : 6000rpm, corkboring machine :adjustable guide that permits holes to be bored in any part of a stopper, the knurled chuck - 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. the steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments,, distillation apparatus : single distillation 5 litres, oven hot air : 14" 14" 14 , voltage stabilizer : 2kv, vertex shaker : 6 tube capacity, mixer small : moter capacity 900 watt, water bath(cu) : 4 , heating mantle with energy regulator : 500 w,2litre, single crucible heater : helical wire coil moldatherm insulation platinel ii thermocouple with 10tm compensated lead wire and polarized plug ceramic fiber hearthplate programmable heat-up to setpoint temperature indicates setpoint and process temperatures temperature: 1200 c (2192 f) maximum crucible sizes: 5 (top vestibule id) x 8 (heated depth), water bath rectangularsingle walled : 6 hole 8 ltrs., water bath rectangular :2 hole, kjeldahl distillation unit : unit of 3 tests, microwave oven : 30 ltr co
Tender For amc of bobcat: phase 1 - scope of work (sow) as mentioned in tender and schedule of work( 16 )items as given below ,[1] operation, bobcat machine with operator 365.000 md,[2] operation, bobcat machine with operator 320.000 md,[3] monthly preventive maintenance, bobcat 6.000 ea,[4] breakdown maintenance service, bobcat 2.000 ea,[5] supply,engine oil filter part no 6675517 4.000 ea,[6] supply, fuel filter part no 6667352 4.000 ea,[7] supply,air element inner part no 6598362 6.000 ea,[8] supply,air element outer part no 6598492 6.000 ea,[9] supply,hydrostatic filter part no6661248 2.000 ea,[10] supply,blower filter part no 6686926 2.000 ea,[11] supply,drive belt part no 6736775 1.000 ea,[12] supply,alternator belt part no 7100572 1.000 ea,[13] supply,in line filter part no 6661022 2.000 ea,[14] supply,tilt cyl seal kit part no 7135555 1.000 ea,[15] supply,lift cyl seal kit part no 7137770 1.000 ea,[16] engine overhaul/machining 1.000 le