Latest afd panel Tenders | Government afd panel Tenders

corporations/Associations/Others

CTN :45445697

19 Jun, 2026 15.14 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on "semi turnkey basis" under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as jointing sleeve binding wire, armour rod etc.

CTN :45458945

16 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot miscellaneous scrap - scrap consists of various sizes, models, and makes of telephones, including signal control phones, dial phones, magnet phones, gate phones, tele dish phones, block telephone instruments, surge protection units, and receivers with ms boxes, among others. these items may be in complete or dismantled condition. this material is not fit for railway. location: - west side of ward 98, beside road. lbpl, dbaw, gst-18%, tcs -1% , hsn code- 85195000, allocation-20714208

State Government

CTN :45425604

24 Jun, 2026 31.08 Lacs

Srinagar - Jammu And Kashmir

Tender For sitc of 145kv, sf6, 2500a bus coupler switchgear including c&r panel at ushp-ii, kangan j&k ut . - supply of 132kv control and relay panel for bus coupler simplex/duplex as per requirement, completely wired including substation automation supporting ieds/numerical relays of make abb/siemens/ge micom/alstom/schneider with iec 61850 compatibility, including bus bar protection suitable for min 08 no. bays., supply of 3 pole, sf6 gas filled, outdoor circuit breaker , including all accessories, auxiliaries and marshalling boxes/kiosks, (145kv, 2500 amps or higher, of 3 phase, 50 c/s and 40 ka for 1 second) along with supporting structures etc. complete in all respects ss body,universal spring charging motor with mandatory sparesthis job includes foundation rework/retrofitting, ensuring that the retrofitting process shall not cause any vibration or disturbance to the switchgear structure during its operation., supply of 10 core, 2.5 sq mm, 1100 v, pvc insulated, pvc sheathed, frls, galvanized steel wire/ strip armored stranded copper conductor control cable complete

Central Government/Public Sector

CTN :45453698

10 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of door arrangement for control room of luggage cum brake van with underslung power pack. colour of the plmdf panel should be ral 9003 signal white & plmdf panel should be as per is:14587-98 gr.-1, type-1., as per drawing: lr56101, packing instruction: lhb doors (body side door and saloon sliding door ) : lhb doors to be wrapped in biodegradable bubble sheet and to be packed in wooden box made of planks of minimum 20mmthick. the wooden boxes to be strengthened along the length at four places with wooden strips of 40x100mm suitable length all around the box. a list should be pasted on each wooden crate showing order no,pl no, description of item,drg no/spec no/set list no with version,qty,firm's name & address,date of despatch etc. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45290179

11 Jun, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of sp/b957-000-xz-mr-0510/155 lighting fixture and accessories-hazardous,junction boxes (flame proof),lighting and power panels (flp),plugs/sockets/handlamps (flame proof),control stations-flame proof,flameproof power distribution board for bprep

Central Government/Public Sector

CTN :45424412

26 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of (1)control arm lower right to drg no.aaa02028 alt'd' - 4 nos, (2)control arm lower left to drg no. aaa02027 alt'd' - 4 nos, (3)contorl arm upper to drg no aaa02026 alt'j' - 8 nos. (these three items form one set). special condition : 1. each item to be properly wrapped in biodegradable transparent plastic sheet to avoid water ingress. 2. the items should be separated by using suitable eco friendly cushioning material to protect machined portion from damage & rubbing. 3. all machined surface shall be protected from corrosion as per rcf spec. md.44121 dt.19.04.2011(para 1). 4.items to be stacked properly in sturdy wooden boxes, which can be handled by fork lift/crane. 5. control arm upper 8nos. in one box and control arm lower 8 nos. (4 left and 4 right) in one box. 6. label with details of description of item, drg. no., quantity, po no., pl no., and name of the supplier, etc., to be affixed on the pallet. infrastructure requirements shall be as per mdts-241 rev.02 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45408652

12 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - onboard in ships at naval dockyard mumbai; electrical system or installation, rate contract for repair / refurbishment of starters control panels & distribution boxes on..

CTN :44778628

05 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of officers tea room at sauw ins satavahana d d - customised table top for coffee or tea kettle microwave induction cook top size 5 ft 3ft with multi drawers for storage of utensils , fabrication of customised wall mounted storage space 6ft x 1.5ft with 2 stacks for crockery and other utensils with 2 stacks for crockery , customised wall mounted display case of 6ft x 1.5ft of three stacks with glass enclosures with locking arrangement , customised 2mm thick blackout double layered zebra blinds with open or shut mechanism , wall paneling wit charcoal or pvc profiles , anti termite hadr material wall paneling , light emitting diode 75 inches diagonally visual display , customised wooden book or magazine shelve , laying of fine finish putty and finishing with royal emulsion coat , laying of electrical cales, metal boxes, control units and sockets for profile illuminations, hanging illumination, spot illuminations and diffusers and other necessary power related materials , customised tough end glass enclosures with shut and close hydraulic mechanism and other accessories with wood wall paneling around the enclosure , customised cushioned seating arrangemens with fine fabric finish seater , customised solid teak wood table with fine polish finish , customised step design and profile weather proof ceiling fabricaed with high density galvanized channels and 12mm thick gypsum sheet , fabrication of customised wall mounted covering arrangement for network switches with door and top mounted exhaust fans ) /bid number : gem/2026/b/7346120 * /dated: 07-04-2026 & & / bid document 1 / 15

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Central Government/Public Sector

CTN :45401033

09 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers, buffer casings with/without spindle, knuckles and coupler yoke for cbc,end shields,control arms,connecting rods, axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers ,screw couplings and its link parts, bearing cover casings,grease collors, anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, middle deck sleeves, winch, gear covers, right angle gear boxes, rods of sorts and sizes, cotter pins, small/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, huck bolts,huck bolt tails ,gudgeon pins, ms plate cuttings, traction motor end shields, end locking screws ,bearing racers, locking plates, cylinder head stud bolts, main bearing sleeves, pull rods,shim plates, safety straps, bearing adapters,valves of sorts and sizes , brake rigging components , connecting rod assemblies, buffer plunger full assemblies , valve springs, pistons, angle cut pieces , air brake components,center pivot top and bottom parts,cbc couplers,msu tubes and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found, should be removed and returned to railways by the purchaser.

Afd Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector