Latest after cooler scrap Tenders | Government after cooler scrap Tenders

Central Government/Public Sector

CTN :45117362

18 May, 2026 NA

Saran - Bihar

Tender For supply of isi marked hot & cool inverter/non-inverter type cassette ac machine of capacity cooling 2 tr, star rating from 3 to 5 star, watt capacity of cooling 6850 watt, power supply 230-1-50 (volt-phase-hz), gril dimension unti 95x5.5x95 cm idv dimension unit 84x20.5x84, gril weight net 6 kg & gross 9 kg air flow 360. make- daikin, o general, lloyd, bluestar, godrej or equivalent. warranty ? as per irs conditions. [ warranty period: 30 months after the date of delivery ]

CTN :45116510

27 May, 2026 NA

Malda - West Bengal

Tender For supply, installation, testing and commissioning of air washer unit consists the following : (i) air cooling machine of capacity 51,000 cmh with 2 nos. centrifugal fans (1 no. working & 1 no. stand by), 2 nos. 15 kw electric motors (1 working one standby), v-belt drive for both the fans, celdek pads, 4 bend pvc eliminators, water pump 0.75 kw (1w+1s), water distribution system with pumps, piping?s, valves etc., air intake filters, g.i. air intake louvers,fan outlet electrically operated actuator dampers and complete in all respect as per spec. (ii) supply with erection of of g.i. ducting- supply air-(a) 0.8 mm ( 22 swg )-160 sq. metre (b) 0.6 mm ( 24 swg )-175 sq. metre (iii) supply, erection and commissioning of supply air grill with vcd of size : 450 x 250 mm-21 nos (iv) supply, installation and commissioning of volume control dampers-2 sq.metre. (v)supply and erection of structural m s support for ducts -500 kg. (vi) supply and erection of gravity air louver size: 300 x 300 mm for exhaust system-21 nos. (vii)supply, erection and commissioning of starter panel drivers -01 set [ warranty period: 36 months after the date of delivery ]

CTN :45091143

21 May, 2026 NA

Kharagpur - West Bengal

Tender For supply of 2 ton split air-conditioner of bee 5-star rating, with rated standard cooling capacity of minimum 6100 watt ( 2 ton), with the function of cooling only, with rotary compressor, inverter (variable speed) type, suitable for 230 v ac, 50 hz system, with 100% copper coil, eco friendly refrigerant, anti-freeze thermostat, with thermal protection for blower motor & condenser motor. conforming to bis specification no. is:1391 (part-2) 2023 & isi marked. bee 5-star rating must comply to ministry of power notification no. s.o. 2794(e) dated 16th july, 2024 & s.o. 3984(e) dated 28th august, 2025 or latest with minimumindian seasonal energy efficiency ratio of 5.6 or latest. refrigerant copper pipes (suction & return) of minimum 4-meter length each, nitrile rubber tube with density 55 kg/cubic meter or more, fire performance class 1, rate of burning class v-0, water vapour diffusion resistance factor (%u03bc) more than 12000, service temperature 10 to 105-degree c, surface flame spread class 1 & thickness of minimum ? inch, relevanttest certificates to be submitted. nitrile rubber tube shall be with suitable inner diameter to suit & to wrap the complete length of refrigerant copper pipe and aluminum foil lamination of 0.2 mm thick to cover entire length of the copper refrigerant pipes will be supplied along with each air-conditioner. the supply shall include one pair of outdoor ac machine stand(containing fasteners) and one pair of indoor and outdoor pcbfor each unit. make: any indian is approved make. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :45087074

12 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap all type of diesel parts and diesel engine parts, ohe parts, cpoh parts such as, crank shaft, tamping unit , blower, radiator, fan cover head, piston, coupler flange,engine parts, track machine parts, showel, link, tm machine parts, hydraulic jack, armature part, hydrolic pump, hydrolic crane, wintch, axle box, blower, gear, shaft, gear case and fan case cover, bearing, pressure chamber, various types of housing, pulley, casing, bush, sleeves, connecting rod, equiliser beam, filter tank, sump, compresor part, spring seat, disc plate, dynamic resister part, head, pinion, radiator tube, cylinder, cylinder head, cylinder liner, damper, engine body, rotor, engine cut up materials, liner, shaft, axle box housing, dril machine parts, cattle guard, water cooling assembly, rmc auto parts, submercible parts, diesel generator set parts, generator parts, tray, crane parts fasterning aids, dg chassis, break cylinder, knuckle, coupling, beam assembly, gear, cam shaft & head, temping unit,buffer plunger and other auto parts, spring pcs., all type of chain, c type clamp, etc. with or without minor nf old used and u.s.

State Government

CTN :44955399

11 May, 2026 NA

Karur - Tamil Nadu

Tender For corrigendum : renovating the wet and dry end cooling fan duct in paper machine 2 in paper electrical at tnpl unit i

Central Government / Public Sector

CTN :45077843

03 Jun, 2026 NA

Nalgonda-Ap - Andhra Pradesh

Tender For supply of auxiliary machine bearing no.3306 a (metallic cage) angular contact for converter (sr) mph oil cooling pump of 3-phase locomotive. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45077314

14 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of battery operated rail core drill along with additional 17 mm tct rail core drill, maximum core cuttingcapacity : 36 mm, rated speed: 250/450 rpm, battery type: li-on, battery voltage: 50 volt, battery pack capacity: 4 ah, number of battery supplied: 2 nos, number of charger supplied: 1 no, special design pressurized internal spindle cooling to give maximum life of core cutter and to avoid heating of the rail. time taken to drill one hole of 32 mm in 60 kg 90 uts rail section less than one minute. time taken to fix the machine on the rail, less than 2 minutes and to de-clamp less than 1 minute. 34 number 32 mm diameter hole with full charge batteries (17 hole per battery) in 60 kg 90 uts rail section. 2 sets of ohe rail drilling adapters for gauge 60, 52 provided along with machine. weight ofmachine with battery: 18.5 kg; spec: tm/sm/468 dated 31.03.2014 first revision, 2017 [ warranty period: 12 months after the date of delivery ]

CTN :45057581

16 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of

CTN :45040894

05 May, 2026 2.00 Lacs

Jaipur - Rajasthan

Tender For 1. repair of air cooling machine

CTN :45049508

21 May, 2026 NA

Liluah - West Bengal

Tender For supply and commissioning of oil cooler complete with bracket for return line of hydraulic system fitted with 230v cooling fan with bsp port. oil flow range 30-250 lpm with cooling capacity upto 22.65 kw at hdt of 30 deg. centigrade similar to model ah-1490 1p of make ace to suit at machine e-51. [ warranty period: 30 months after the date of delivery ]

After Cooler Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector