Latest aggregate course Tenders | Government aggregate course Tenders

Central Government/Public Sector

CTN :45713868

11 Jul, 2026 30.00 Lacs

Delhi - Delhi

Tender For periodical services and other connected items at af stn 3 wing under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed ., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed ., all as per item no 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed ., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed ., m&l for rough cast (grit) finish plaster with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed ., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed ., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed ., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed ., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed ., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed ., m&l for complete removal of old decorated, plast

Central Government/Public Sector

CTN :45713884

11 Jul, 2026 40.00 Lacs

Delhi - Delhi

Tender For periodical services and other connected items at af stn basant nagar under aor of ge (af) faridabad - demolition/dismantling of brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc, complete all as specified and directed., m&l for brickwork with subclass b bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed., all as per item no. 02 above but except bricks., m&l for brick work with sub class b bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in cm 1:4 complete all as specified and directed., taking down cement plaster of any description on concrete surfaces such as soffit of rcc slab, chajjas and brick walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick cement plaster in cm 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed., m&l for rendering 15mm thick in cm 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl wpc as per user manual complete all as specified and directed., m&l for rendering 10mm thick in cm 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. ., m&l for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m & l for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer incl one layer of 3mm thick wall care putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed., m&l for rough cast finish plaster(grit wash) with a mixture consisting of crushed stone or fine gravel aggregate mixed with coarse sand and cement in the ratio of 1:1:1 over & including 12mm thick rendering in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls complete all as specified and directed., m&l for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed., m&l preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of appropirate primer over including a layer 2 mm acrylic wall putty to achieve desired smoothness and eveness complete by hand roller complete all as specified and directed., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed., m&l for preparation of newly plastered surface of walls & material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed., m&l for complete removal of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying two coat of white wash complete all as specified and directed., m&l for complete removal of old decorated, pl

Corporations And Associations And Others

CTN :45563054

07 Jul, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : e-tender for civil contract jobs - civil contract job:, earth filling under floors with surplus ordinary soil or soil containing gravel or kankar, including ramming, watering and consolidated lead., first class burnt brick work laid in cement sand mortar 1:7 in foundation and plinth, laying 80 mm thick factory made cement conc. inter locking paver bricks after m-40 grade made by block making machine with string vibratory compaction ordinary gray color & pattern over 50 mm thick compacted bed of coarse sand filling the joint with fine sand, complete in all respect ., dismantling brick of flagged stone flooring including concrete base, dismantling concrete plain 1:2:4 mix, cement concrete 1:2:4 with stone ballast or shingle, a. mixing by manual mean, b. mixing by mechanically mean using concrete mixer, laying of dry brick ballast 40mm gauge for flooring, civil work (rate to quoted on csr rates)

State Government

CTN :45724060

01 Jul, 2026 NA

Karnal - Haryana

Tender For job work for scouring ac/pvc 80mm,100mm,150mm exixting pipe line, exacuation of trenches,cutting at pipe bailing out of water from trenches ,construction in accordance with is: 4097, including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement, all complete as per direction of engineer-incharge. / bhadson and bhadson colony t/w.

CTN :45692588

02 Jul, 2026 16.49 Lacs

Jamtara - Jharkhand

Tender For water treatment plant cleaning,purchasing of equipments for wtp, laying of di pipes and sluice valves, construction of sv chamber and phed esr repairing for jamtara nagar panchayat. - labour for site clearance -do--e/i, desilting the supply well, intake well /head works, sump of water supply /sewerage works etc. in wet or dry condition including lifts upto 9 m and lead upto 150m as required beyond the work site,stacking, spreading, including necessary guarding, etc. complete, as directed by e/i, supplying and laying of rapid sand gravity filter sand, supplying and laying of rapid sand gravity filter gravel, supplying of bamboo for scaffolding works, supplying of narial ropes for binding works submersible pump set, requirement of plumber class-ii for opening & closing of valve & other related works, requirement of electrician grade-ii for making required connections & other related works, hiring of different tools,chain pulley & tackles for cleaning & other works, disposal of excavated earth & filter bed sand, sand (lead 02k+10p=12 km), gravel (22 k.m. lead), tyre coupling (unique 3409-gn tyre coupling for 100hp & 50hp), bosch lithium based grease, graphit gland pack rope 12mm, graphit gland pack rope 16mm, 2.2kw (3hp) foot mounted motor tefc 1500 rpm 3-phase motor for clariflocculator, multi-blade paddles mounted on central shaft driven by foot-mounted geared motor, onload changeover switch 800a,415v, 4 pole, digital voltmeter (0-500v)-3 phase indicator, digital ammeter (0-500a)-3 phase indicator, led indicator lamp or phase light (r/y/b/g), pvc/xlpe insulated pvc sheated heavy duty,armoured lt cable with aluminium conductor voltage upto and including 1100 v, 240sqmm, 3.5 core, 2.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, 1.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, laying of one number pvc insulated and sheated/xlpe power cable of 1.1kv grade of size not exceeding 35sqmm direct in ground including excavation, sand cushioning and refilling the trench, tapered bearing 7316 mcb (large), deep groove ball bearing 6311 mcb (small), chain pulley block hoist 5 tonne, 360 rotation, 3mtr lifting height, pipe wrench, 18 inch taparia adjustable heavy duty pipe wrench, pipe wrench, 14 inch taparia adjustable heavy duty pipe wrench, 1/2" sqaure drive flank drive taparia goti 22mm socket set, 1/2" sqaure drive flank drive taparia goti 20mm socket set, rachet wrench, 18 inch single sided rachet wrench, 1/2 inch drill bit for threading di/ci pipe, tata agrico hammer -dfs- 2.5kg, 6 inch tyton epdm/sbr rubber gasket for 150mm di pipe conforming to is:5382 isi mark, 4 inch tyton epdm/sbr rubber gasket for 100mm di pipe conforming to is:5382 isi mark, 6 inch di end cap flanged type for 150mm di pipe, 4 inch di end cap flanged type for 100mm di pipe, epdm rubber gasket for non-return valve, earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 150mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm repair), earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches wit

CTN :45696882

06 Jul, 2026 24.00 Lacs

Jaipur - Rajasthan

Tender For supplying of various construction material and machinary in m.c. shahpura under msrgy scheme (arc) 2026-27 - water supply tanker for 5000 ltr., water tanker 6 kl capacity, tractor trolly, hydraulic excavator of 1 cum bucket, concrete mixer (0.4/0.28 cum), surface vibrator, vibratory roller 8 tonne, needle vibrator, tractor with rotevator, tipper 5 cum, stone aggregate 10 mm, stone aggregate 20 mm, stone aggregate 40 mm, cement opc, cement ppc, random rubble stones, stone for masonary work, coarse sand, fine sand, moorum, gravel/quary, empty gunny bag, factory made interlocking c.c. paver, factory made interlocking c.c. paver, plaster of paris, paint, enamel paint, plastic emulsion paint, acrylic exterior paint, water proofing cement paint, oil bound washeble distemper, water based cement paints, farm yard manure, pesticide, cost of water, barbed wire, structural steel, painter, mason (1st class), mason (2nd class), blacksmit (1st class), blacksmit (2nd class)

State Government

CTN :45660452

07 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For unit rate of composite items for recharge scheme for new and defunct tube wells/wells for groundwater recharge in bhavnagar dist. for the year 2026-27 - half brick masonry in common brunt clay building bricks having crushing strength not less than 35 kg/sq.cm. in cement mortar 1:4 (1- cement : 4 -coarse sand ) in foundation and plinth (b) conventional(r&b sor 2024-25 , it.code-06008a2a, p.no.70)(1 represents labour cess added), brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:5. (1- cement : 5 -fine sand) (b) conventional(r&b sor 2024-25, it.code-06001ba, p.no.67)(1 represents labour cess added), providing, laying and jointing in true line and level 110 diametre u.p.v.c (type b) conforming to is 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to isi 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of pvc clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(r&b sor 2024-25 it.no.23067, pg.no.164)(1 represents labour cess added), providing & fixing 200 mm dia "u" pvc casing pipe "cm" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), providing & fixing 175 mm dia "u" pvc casing pipe "cs" type pipe.( gwssb sor mech 2022-23 section-b, page. 21, item no. 11-b ), drilling of bore well by dth rig in rocky formation in all talukas of all districts of zone - iii. up to 350 mtr. for dia 200mm(gwssb 2022-23 sor, it.no.3.2, p.no.2), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(b) dense or hard soil(r&b sor 2024-25 , it.code-04b001b, p.no.47)(1 represents labour cess added), excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materialsand disposingofftheexcavatedstuffupto50 meter lead.(d) soft rock not requiring blasting(r&b sor 2024-25 , it.code-04b001d, p.no.47) (1 represents labour cess added), jungle cutting and site clearing(r&b sor 2024-25 , it.code-26117a, p.no.246) (1represents labour cess added), pebbles of size 5 to 10 millimeter (river pebbles)(gwssb mech 2022-23 sor,anne-a sr 18 ), gravel of size 2 to 5 millimeter(gwssb mech 2022-23 sor,anne-a sr 18 ), coarse sand(gwssb 2022-23 sor, section 1d it.no.5.1, p.no.61), backfilling of excavated tranch for pipeline with soil(gwssb 2022-23 sor, section 1&2b it.no.14(1), p.no.40), suppliying o graded stone aggregate of following sizes (forw.b.m. road)(2) hand broken stoneaggregate 40 mm to 63 mm size.(r&b sor 2024-25 , it.code-26011b, p.no.176), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(iv) 20mm(r&b sor 2024-25 , it.code-26012d, p.no.176) (1 represents labour cess added), supplying of crushed stone aggregates, chippings etc.of hard stone of following nominal size free of disintegrated pieces deletarious and oraganic mater and grading asper i.r.c. code.(vi) 10mm(r&b sor 2024-25 , it.code-26012f, p.no.176) (1represents labour cess added), spreading and laying stone agreegate of different size in to proper layer specified as per design and drawing inncl. hand packing etc complete with all lead and lift (as per ra), providing and fixing in position white marble plate of size 45x45x1.8 cm incl ingraving the tettera as per drawing/as direct etc complete. (irr. sor 2024-25 ch.5 it.17 pg.22)

State Government

CTN :45621543

29 Jun, 2026 2.73 Lacs

Angamaly - Kerala

Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec

State Government

CTN :45582285

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka botad under taluka panchayat, botad under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm

State Government

CTN :45583213

07 Jul, 2026 NA

Botad - Gujarat

Tender For supplying and stacking various type of building, road& other construction materials, at various places of taluka gadhada under taluka panchayat, gadhada under mgnrega (annual unit rate) - seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials, seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):25 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, blasting powder, curing compound, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), sealant primer, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, decorative plywood 4 mm, cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, moorum, dry distemper, distemper primer, enamel paint, water proofing cement paint, ordinary varnish, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, spirit, spun yarn, mild steel plates, mild steel rivets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, through and bond stone size 24 x 24 x 39cm, stone dust, kota stone slab 20 mm to 25 mm thick (semi-polished), kota stone slab 25 mm thick (rough chiseled), stone grit 6 mm and down size or pea sized gravel, g.i limpet washer, bitumen washer, water proofing materials

Aggregate Course Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors