Latest agricultural equipments Tenders | Government agricultural equipments Tenders

corporations/Associations/Others

CTN :44348671

14 Jul, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : tangedco nctps i 3x210mw installation of semi dry flue gas desulphurization system - tangedco – nctps-i–(3x210mw) – installation of semi dry flue gas desulphurization system complete design, engineering, manufacture / supply, inspection and testing at supplier’s works, packing, forwarding to site, transportation, unloading, storage, preservation, insurance, handling at site, pre-assembly, assembly, erection / supervision of erection, final painting, start-up, pre-commissioning, testing & trial run, commissioning, performance guarantee testing and warranty of fgd system up to completion of warranty period, training of purchaser’s personnel for complete fgd equipment / system covering all mechanical, electrical, c&i, associated steel structure, civil & architectural works for semi dry flue gas desulphurization system in all units of3 x 210 mw steam generators with complete associated auxiliaries, accessories and other related items of respective work for the complete fgd plant and equipment on turnkey engineering, procurement and construction basis, necessary for putting into operation, a highly reliable, safe, efficient and environmentally compliant fgd plant in order to reduce the sox emission to comply the new environmental norms in 3x210mw units of nctps i, athipattu, tiruvallur dist., tamil naduunder single epc basis.

corporations/Associations/Others

CTN :45624244

26 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

State Government

CTN :45625466

02 Jul, 2026 16.05 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment and g.i chain link fencing open gym in village chanchali yea wc-6 - sit up station: providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), leg press: providing, designing and fixing of leg press of size 2000 x 550 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars to be provided with high quality grip rubber on top end. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seat and base plate cover to be made up from virgin lldpe manufactured by rotational molding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/ lldpe caps for user safety. the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid separately). (ar/yeida/uppwd/sor-2020), seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80 - 120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact or injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational mounding with minimum thickness of plastic as 8mm, colorful and uv resistant and environmental friendly. bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in charge. equipme

State Government

CTN :45585176

29 Jun, 2026 8.18 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment in village tilpata karanwas, greater noida. - sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum, thickness of plastic of 8mm, colorful and uv resistant and environmental friendly., the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately)., air walker: providing, designing and fixing of air-walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 10mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic weded with joints paint to be applied al all the welding points prior of finising. all open ends of pipe to be closed with gl/lldpe caps. base plate cover shall be made virgin lldpe plastic by roatational molding with minimum 8mm thickness. uv resistant and colour as approved by engineer in charge. ligh quality grip rubber should be used on handles., foothold shall be made of nylon prevent alloy with rounded edges to impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duiy oil sealed and self lubricated to be approved by engineer-in charge. the equipment shall be fitted with in-built limiters. the equipent shall be fixed on ground with concrete of minimum strength m-25 and js haped welded bolts and when concrete is sec. fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in charge regarding material, shape of equipment. colour (of metal. seat and pedal). and fixing of equipemnt etc (the cement concrete and excavation work shall be paidseparately)., seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000mm abricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off |removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and uv resistant and environmental friendly., bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/illdpe caps for user safety. the equipment to be fixed on ground with concrete of minimum

CTN :45281561

20 Jun, 2026 59.46 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For bid to ras tender for supply of fixing self regulating heat tape cable insulation and accessories in ppr pipe - providing and fixing self regulating heat tape resistance heating cable suitable to protect freezing of water in pipelines having rated output of 35 w per meter at 220 v ac supply the heating cable shall have capabibility to automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating the cable should be suitable for continuous operation in outdoor in adverse climatic conditions flexible for installation around pipelines joints and valves and compatible with temperature controller systems , providing m20 3 pin connector suitable for making secure electrical joints between self regulating heat cable terminals designed for reliable power and signal continuity the connector should be operable for operation at rated 220 v ac supply and compatible with heating cables of specified capacity must l ensure safe and firm termination with robust insulation to prevent moisture ingress short circuits and electrical leakage the connector shall be made up from high-quality weather resistant materials suitable for continuous outdoor operation under adverse environmental conditions it should be ease in installation with a compact and durable design for use in pipeline joints terminations and interconnections the connector should be compatible with temperature control systems and associated accessories ensuring long term performance safety and protection against overheating corrosion and mechanical stress , providing temperature differential controller with auto and manual operation housed in a robust ip65 rated enclosure suitable for controlling heat tracing systems to prevent freezing of water in pipelines and utilities the controller should be capable to automatically switch the heat tape on off based on preset temperature differentials ensuring optimal performance and energy efficiency the controller should have in built safety features such as overrun protection and burn out protection to safeguard the heating cable and associated equipment from damage the enclosure shall be weatherproof and suitable for outdoor installation offering protection against dust and water ingress and ensuring reliable long term operation under harsh environmental conditions , providing pt100 temperature sensors with 10 metre cable suitable for accurate temperature measurement and control in heat tracing and pipeline monitoring applications the sensors should be made up of platinum resistance type pt100 ensuring high precision stability and reliability over a wide temperature range the wire with sensor should have high quality insulation suitable for reliable signal transmission and compatible with temperature controllers and monitoring systems the cable shall be durable flexible and suitable for installation in outdoor under extreame weather conditions in high altitude area , providing 3 core 1.5 sq mm pvc insulated and pvc round sheathed multicore flexible cable comprising bright annealed bare copper conductors suitable for heavy duty industrial applications rated for voltage grade up to 1100 volts the cable shall confirm to requirements of is 694 2010 the conductors shall be made of high-conductivity annealed copper ensuring efficient current carrying capacity and minimal losses each core shall be uniformly insulated with high-quality pvc compound and the overall cable shall be protected with a durable pvc outer sheath providing resistance against moisture abrasion and mechanical stresses the cable shall be flexible in nature allowing ease of installation in confined and complex routing conditions it should be suitable for continuous operation in indoor and outdoor adverse environments offering reliable performance electrical safety and long service life

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

State Government

CTN :45291650

15 Jun, 2026 NA

Ukai - Gujarat

Tender For corrigendum : providing of testing service for on-board /commissioned equipment/ instrument related to plant - wt-5177g work of environmental sampling and analysis ie monitoring of stack emission ambient air quality and water effluent at utps-eeec; as per scope of work in atc;..

Central Government And Public Sector

CTN :45454198

11 Jun, 2026 NA

Bangalore - Karnataka

Tender For the offered equipment is a fiber media converter, model gomc-bi3512-20 or equivalent , designed for conversion between 10/100/1000base-tx copper ethernet and 1000base-fx optical fiber networks. the converter supports ieee 802.3, ieee 802.3u, ieee 802.3ab and ieee 802.3z standards, ensuring compatibility with gigabit ethernet networking applications. it provides one rj45 copper port with auto-negotiation support for 10/100/1000 mbps data rates and one sc type bi-directional fiber port operating at tx 1310nm / rx 1550nm wavelength with transmission distance up to 20 km over single-mode optical fiber. the device supports full duplex flow control and half duplex back pressure for efficient data transmission. led indicators are provided for power, optical link/activity, full duplex status, twisted pair link/activity and transmission rate indication. the converter operates on dc 5v, 1a power supply with optional external or internal power supply configuration and power consumption less than 3w. it is designed to operate in environmental conditions ranging from -10?c to +55?c with storage temperature from -40?c to +85?c and relative humidity from 5% to 95% non-condensing. the unit dimensions are 94mm ? 70mm ? 26mm for external type and 140mm ? 110mm ? 30mm for internal type. the product is suitable for network communication, ftth/fttb/fttx applications, isp backhaul networking and subscriber end connectivity. the equipment complies withce, fcc and rohs certifications. [ warranty period: 36 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45208234

13 Jun, 2026 5.12 Crore

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : environmental measures. hiring of mechanical equipment for attending miscellaneous works of operational areas in visakhapatnam port for a period of 3 years i.e. 2026 to 2029. - supply hydraulic excavator (3d) with tyre mounted with driver and fuel for clearing the unwanted materials minimum 8hrs per day from the drainages (destination/roads of vpa) as required and as directed by the engineer-in-charge,complete all hire and operational charges.all labour and materials., supply of tractor with trolley in good running condition of make tata/ashok leyland/mahindra or equivalent having a carrying capacity of 3.00 m3 with hydraulically operated body for attending miscellaneous works in port operational areas and other areas as required and as directed by the engineer-in-charge .the cost inclusive of all hire and operational charges etc.., complete.all labour and materials., hiring of suv(non a/c) tata sumo/bolero/ tavera of equivalent of higher version of model 2019 of later including drivers salaries and maintenance charges,hire and operational charges as required and as directed by the engineer-in-charge, complete with 1800km mileage per month., supply of mini excavator in good running condition of make tata/hitachi/z-axis 20 u or equivalent to work in port operational areas and other areas in port area for desiltation of all types of drains and other miscellaneous etc.., as required and as directed by the engineer-in-charge.the cost inclusive of all hire and operational charges etc..,complete., supplying of man power associate with the vans and equipments in port operational areas with necessary tools and plants etc.., as required and as directed by the engineer-in-charge,complete.all labour and materials.

CTN :45415554

18 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipment - purchase of equipment: dual pump nanofiber electrospinning unit, 1. high voltage power supply output: 0 40 kv, positive & negative polarity, digital control with current limiting and safety interlock2. syringe pump system dual syringe pumps, upgradeable to triaxial (3) or four (4) syringe configuration flow rate range: 0.001 20 ml/hr, compatible syringe size: 1 60 ml3. spinneret system stainless steel needles (18g 30g) capability for single, coaxial and triaxial electrospinning, multi-needle spinning provision4. collector system interchangeable flat plate and rotating drum collectors (different sizes), drum speed: 0 5000 rpm adjustable tip-to-collector distance: 5 30 cm5. environmental control chamber fully enclosed electrospinning chamber, temperature control: ambient 60 c humidity control: 20 80% rh6. control & automation touchscreen / pc-based operation, programmable process parameters real-time monitoring of voltage, flow rate, collector speed, temperature and humidity7. digital interface & data handling advanced digital interface for system control, high data storage capacity for experimental records data export through usb / ethernet8. safety features, fully grounded system door interlock for high-voltage safety emergency stop and overload protection9. accessories & support syringes, needles, grounding cables and collector substrates, on-site installation and user training, operation manual warranty: minimum 2 year

Agricultural Equipments Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors