Latest air brake equipment Tenders | Government air brake equipment Tenders

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44573965

31 Mar, 2026 NA

Kamrup - Assam

Tender For supply of clutch plate assy , sleeve cylinder , master cylinder , clutch booster , suction hose with end coupling , valve spool hand operated , brake chamber , brake cylinder rear , air dryer , main brake valve , accelerator wire , ground switch , door glass regulator , switch , clutch or gear booster repair kit , window regulator , control valve , drain valve assy , tappet gasket , brake cylinder , actuator rotary ec-90 rotex , priming pump kit , seal kit for monitor valve , pto drive housing or pto kit , pl valve , brkt-4 way protection valve , hand brake assy- hand brake valve , assy valve solenoid air or elect 24 v , starter motor , circuit breaker , belt fan drive, waterpump , reverse switch , steering filter , gauge pressure dial indicating make h-guru range 0 to 25 kg or cm sqaure , gauge compound vaccum dial indicating make hguru range 1 to 24 kg cm sqr

Central Government/Public Sector

CTN :44587981

09 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of pipe 20 nb for boxnhl (bmbs) wagon,one s [pipe 20 nb for boxnhl (bmbs) wagon,one set of 2 items as per rdso drg. no, wd- 09034-s-12,item- 8 & 9, alt-04 or latest. uvam item ref. : 3100389--component of graduated release compressed air brake equipments for freight & coaching stock , sub item : 3100389007--sub item:pipes & joints for air brakes]

Central Government/Public Sector

CTN :44550310

30 Mar, 2026 NA

Sidhi - Madhya Pradesh

Tender For supply of clutch pressure w-h-part -821ew02134 , w-h, level sensors-part -130ew02701 , wire harness, engine-part -125ew02614 , gasket-part -ccc0951000 , hose fltr to t.c.v.-part -130pt91271 , tube-part -768ps02123 , tube- part -768ps02131 , hose-part -762ph91449 , hose-part - 799ph98436 , hose-part -474ph05544 , carrier roller- 4-part -130tf00139 , o ring-part -chs0113034 , rubber cushion-part -130ec62945 , bolt-part -cfb0121030 , acceleration-accelerator cable-part -767ce02007 , gauge pressure-part -640000199701 , gauge-part - 071005245050 , nipple-part -cpf0511013 , tube-part - 130pt02243 , tube assy-part -126ph03012 , bolt npc- part -0143701030 , lube pressure sensor-part - 953eg88464 , gasket-part -820cv71004 , can converter-part -130ip81106 , hose assy-part - chh2211214 , rod end-part -767ce11347 , gasket-part - ccp0300002 , adaptor-part -118ph11047 , lock plate- part -125tf14243 , support-part -768fg03012 , support- part -130fg02799

Central Government/Public Sector

CTN :44510368

02 Apr, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of set of bracket complete |consisting of t [set of bracket complete |consisting of three items as per drg no. 2.10113.0.03.100.017 = 02 nos, le 11279 = 02 nos & 4.10113.0.03.100.164 = 01 no. ( air brake equipment panel suspension bracket ) ]

CTN :44445050

03 Apr, 2026 NA

Meerut - Uttar Pradesh

Tender For expression of interest for procurement of spares of tatra 815 euro version engine - shaft sealing g 60x80x13/ retainer seal, outlet insulation, top rubber seal (valve), sink screw, screw m5x10, clutch booster, hex nut m8 is:1364 (part-iii) 8-1983/ nut plain hexgon, diode, screw, m s nut, sealing ring 30x36, is:3175- 74 al, lock washer, hex hd screw m8x22 is:1364 (part-ii) 8.81983/ screw wood, clamping strip 9x235 csn 02 2757, gasket (6264001), gasket 0.5mm, sealing ring 33x3.2, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, sealing ring 33x3.2, clip for accelerator rod spring, shaft sealing a/bswfld 40x52x7 fpm 8015, clutch carrier, gasket 0.25mm, hose 100mm, hose 13x300 csn 137821.1, oil supply tube, lh, repair kit set (turbo blower rh & lh), clamping strip 9x235, gasket (06825-43), intake hose, alternator clamp, hose clamp / clamp, front cover, shim for engagement clutch bush, washer, self lubricating bushing, insulation tube, brush (443930151937), hose 36/46 l=45mm, shaft sealing 45x68x12.5, lock washer, sealing ring, spring washer, gasket, plain washer, sealing ring 25x21, sealing ring 14x20, washer 7.6/20x1.5 mgn 19.05.60/01.221, water proof starter motor 5.8kw/24v, hex hd screw m6x12 is:1364 (part-ii) 8.8-1983/ screw machine (106 103 140 611), gasket 0.50 mm, gasket 0.25mm, neck 20 csn 13 7854.22, plug, gasket (6264001), gasket 3 mm, hex hd bolt m 8x28 is:1364 (part-ii) 8.81983, tube, gasket 0.5mm, discharge tube, tube, hex nut m8 is:1364 (part-iii) 8-1983, shaft sealing gpv 30x55x9, is csn 02 9401.0, shaft sealing gpv 30x55x12, is csn 02 9401.0, spacer washer 0.05mm, gasket 0.5mm, gasket 0.25mm, gasket 0.25mm, hose rptu 127150 27/37, 420mm, lever pin, gasket 0.25mm, parallel key 6h9x6x25 is:2048-1983, directing sheet, clip for accelerator rod spring, gasket 0.25mm, shaft sealing a/bswfld 40x52x7 fpm 8015, gasket 0.25mm, gasket 0.25mm, hex hd screw m12x55 is:1364 (part-i) 8.8-1983, hose 100mm, gasket 0.25mm, hose 13x300 csn 137821.1, repair kit set (turbo blower rh & lh), gasket (06825-43), sealing ring 55x5 csn 02 9281.2 / sealing non-metallic round section, sealing washer, lid, needle bush hk 3520, sealing washer, spacer washer, front cover, rear cover, insulation, holder, outlet screw, resistor, washer, washer, self lubricating bearing 443932000210, holder, insulation, hex hd grease nipple 16m10x1 / fifting lubrication, insulation tube, holder, brush (443930151937), outlet screw, washer, insulation, clamping strip 9x360, shaft sealing g 60x80x13 / retainer seal (101-521-017-317), gasket, hose 36/46 l=45mm, 1.5 electric teflon insulated wire, eyelet round shape no 10, male female eyelet, adopter of steering pump, plug for front housing, fastening plate, bushing, washer 1.5mm, sealing ring 14x20 is: 3175-74 cu, sealing ring 28x2, intake valve guide, distance washer injectors (thicness 0.10 mm), cam shaftbush (thick), cam shaftbush (thick), sealing ring 120x3, sealing ring 25x21, gasket, sealing ring 11x7, screw, gasket, pin (304 002 3200), discharge tube, oil supply tube, washer, lock sheet 32, lock ring 24 is:3075 (part-i)-1986, gudgeon pin (304 3006), hose clip, lock washer, cover, plug m18x1.5 ona 1913.05, ring, self lubricating bearing, slotted nut m32x1.5, spacer washer 1.0 mm, nut plain hexagonal, hex hd bolt m 12x90, spacer washer 0.3mm, spacer washer 2.0 mm, ball bearing (6306), ball bearing (6303), gasket 0.25 mm, sealing ring 36x44, is 3175-74 al, lock ring 20 csn 022925.1, spring washer 22 is:6735-72, sealing ring 24x30 is:3175-74 al / sealing ring metal, hose l=180mm, clip 9 csn 02 2753.5, gasket 0.25mm, stud c m8x25 is:1862 -1975- 8.8, stud c m8x30 is:1862 (part ii)-1975- 8.8, clamping strip 9x235 csn 02 2757, hose holder, hose holder, gasket 3 mm, hose 25/35 l=90mm, sealing ring 20x26 is:3175-74 cu, plug, hex hd bolt m10x85 is:1364 (part-i) 8.8-1983, spacer washer 0.10mm, sealing ring, sealing ring 08x12, is:3175-74 cu / sealing ring metal, spacer washer 0.10mm, intake valve line, ball bearing 6206a