Latest air circulating fan Tenders | Government air circulating fan Tenders

Central Government/Public Sector

CTN :44712230

15 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of cooling fan assembly for elgi make rr20070 main air compressor, part number 070314750 for 3-phase memu. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44820117

20 Apr, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of cooling fan and pulley assembly to elgi part no.070313310 for elgi model trc 2507 compressor in maintaining of demu-dpc. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44808226

24 Apr, 2026 3.57 Lacs

Jaipur - Rajasthan

Tender For procurement of condenser fan (blades) assembly for rs08 saloon hvacs and cab hvacs

Central Government/Public Sector

CTN :44390818

16 Apr, 2026 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of spares for atlas copco compressor e e -item1 8000hr kit new g200-g250 , item 2 oil rs ultra 209l , item3 unloader kit c190 part no-3002604220 , item4 assembly part no-1623181080 , item5 bearing part no500451003 , item6 sealing part kit part no-3002604870 , item7 mvp kit part no-3002604880 , item8 kit shaft seal part no-3001531117 , item9 cv-osv kit part no3002604860 , item10 thermostat valve part no1830080588 , item11 o-ring 32. 2x3 part no-663313000 , item12 contactor 3ts5422-0ap0-ac3-230vac part no90965955561 , item13 contactor-3ts522-0ap00-8k230vac part no-9096594993 , item14 contactor part no9096595558 , item15 over load relay part no-9096594993 , item16 circuit breaker part no-9096595563 , item17 transformer part no-9096595585 , item18 connector mk5 16pins part no-1088003781 , item19 connector mk5 14pins part no-1088003780 , item20 connector part no1088003132 , item21 fan axial part no-1092140230 , item22 temperature sensor part no-1089057470 , item23 pressure sensor part no-1089057591 , item24 temperature switch part no-1089063716 , item25 solenoid valve part no-1089062110 , item26 pressure sensor part no1089962501 , item27 kit mk55 lpwa with antenna part no1837032033 , item28 solenoid valve replacing1089038061 part no-1089066834 , item29 valve safety part no-1092000177

Central Government/Public Sector

CTN :44420429

13 Apr, 2026 NA

Angul - Odisha

Tender For corrigendum : procurement of complete assembly renold hitech coupling pm 270 for stageii id fan for fy 2025 26 tstps kaniha.

Central Government/Public Sector

CTN :44822226

22 Apr, 2026 NA

Sundergarh - Odisha

Tender For supply of fes fan assembly, pd/r-286541&rs-7.01. 215

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

Central Government And Public Sector

CTN :44807276

13 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For supply of brush holder assembly suitable for grid fan for roof mounted bkbl motor to emd part no. 5387140 make daulatram, emd or similar. [ warranty period: 30 months after the date of delivery ]

CTN :44802829

20 Apr, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of living shelter ojl 2471 - chromium plated brass 15 mm weight not less then 330 gm , stop cock t type chromium plated brass 15 mm weight not less then 330 gm , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm weight not less then 330 gm , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , corner sheet glass shelf with two shelf assembly consisting of 5.5mm thick sheet glass shelf with cromium plated brass bracket guard and railing , soap dish ss, flat back complete with screw , 2000 ltrs anaerobic frp lldpe septic tank alongwith all accessories , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t 32-20-32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll isi marked , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor. minimum thickness shall be between 6-8 mm tiles , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , pvc air pipe 32 mm dia , white cement confirming to is 8042 1989 , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn, 240 volts copper bus bar and neutral link earthing stud conforming , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor , pvc casing capping of size 1 inch medium grade , pvc casing capping of , switch piano 5 amp 230 volts flush type one way , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug , pvc switch board snow white , pvc switch board snow white , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose , switch socket combination snow white , service bracket 40mm dia gi tubing medium grade , service cable pvc insulated aluminium conductor , ceiling rose three terminal , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts , pvc flexible wire copper conductor multi stranded , pvc flexible conduit pipe 15 mm dia , pvc round per squire block , plastic body fresh air fan with louvers shutter of 200mm sweep model brisk air of crompton or equivalent model , electric geyser 5 star of capacity 50 ltr , fire extinguisher of one kilogram capacity dry power type conforming to is-13849 along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1.5 m //bid details 2 / 83 long , gi wire 4 mm diameter for earthing , charcoal , salt normal , lightening conductor air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed includi

CTN :44820816

27 Apr, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply of set of cooling fan with shaft for m/s elgi make main compressor model no. rr15070 to elgi part no a070550 consisting of following items : (1) fan assembly to elgi part no. a070550, qty. 01 no./set. ; (2) fan shaft comps to elgi part no. 070405770, qty. 01 no./set. and (3) key wood ruff to elgi part no. 070405650, qty. 01 no./set. [ warranty period: 30 months after the date of delivery ]

Air Circulating Fan Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors