Tender For supply of all inclusive comprehensive maintenance including periodical servicing of following capacity engine alternator sets installed at various te admin bldgs bts sites etc , providing replacement of following faulty items in the existing dea set essential for the smooth operation of dg set complete with installation testing and commissioning all as required , engine safety control box with audiovisual arrangement alongwith wiring to make operational the above item , 12 volt 10 amp smps type battery charger ic transformer, rectifier unit and filter circuit etc , digital ac voltmeter 0 to 415v , avr make national or ss make
Tender For supply, installation, testing and commissioning of 5.5tr capacity five star split ac along with modification/fabrication/insulation works required for mounting of the new ac unit for lci unit at yccpp plant, yelahanka
Tender For procurement of different eot cranes accessories, electrical changeover switch for emd-iii and spare parts of hoist and crane for emd-ii etps htps kasimpur - down shop lead (dsl) 125 a 4 pole with all accessories for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for lt 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for mh 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for ct 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for lt 160 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for mh 250 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ct 100 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ah 200 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake dia 250 mm ,34 kg with brake pad & brake liner for ah for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for mh dia 300 mm ,34 kg with brake pad & brake liner for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for lt 250 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for ct 160 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for lt 200 mm ,34 kg with brake pad & brake liner for 120/30 ton eot crane , make- russian., location -tg hall ctps (1*110 mw), onload changeover switch 4 pole 200 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):200 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,#enclosure sheet, make- havells, schneider ,l&t,abb,hpl, 4 pole change over switch 320 amp#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):320a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure:steel sheet, make- havells, schneider ,l&t,abb,hpl, onload changeover switch 4 pole 400 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):400 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure: sheet, make- havells, schneider ,l&t,abb,hpl, voltage-110v ac, 1 no, 3-phase, 415v ac, power contactor a30-30-10-84, current rating - 30a, coil voltage-110v ac, 1no, 3 phase, 415v ac, addon block auxilary contact mnx a2, auxiliary relay, model-my4n-100,50hz,110v ac, contactor ax32-30-10-80,220-230v,50hz, contactor ax09-30-10-80,220-230v,50hz, contactor mnx18 18a,220v,1nc,3pole., contactor 3tf 30-10-10e,220-230v,50hz., contactor ax32-30-10-84,220-230v,50hz., 3 pole power contactor mnx32 in 110v ac, aux contact block 2a ca5 x-10 1no contact, aux contact block 2a ca5-01 1nc contact, olr 3ru2116-1kbo,09a-12.5a., olr ta25du-1.8m,1.3a-1.8a., olr ta25du-15m,10a-14a., olr ux1418,1.25a-2.0a., control transformer 415vac/110vac,200va, control transformer 415vac/110vac,250va, 1-phase 415/110v,50hz,1000a,150va control transformer (panel) insulation class-f , primary current-0.361a, secondary current-1.364a,il-0.66/3kv, miniature relay g2r-2-dc5-5v 5a two set of conversion 2c(dpdt conversion)dip,12.7x28.8mm power relay rohs
Tender For corrigendum : tender for supply of solar pv panel topcon - 15 kw , grid connected inverter/ power conditioning unit (pcu) alongwith built-in meter , module mounting structure (mms) , structure accessories , net meter and solar meter , array junction box , dcdb , acdb , string and jumper , earthing and cable , lighting arrestors , lighting protection system (lps) , surge protection device (spds)- surge arrestor , connectors , conduits and pipes. , dc cable for string and jumper , power cable from inverter to acdb , power cable for earthing - 15 kw , ac armored aluminum cable - 15 kw , installation , testing and commissioning - 15 kw , grid islanding protection as per nit , danger boards & signages as per nit , fire extinguishers as per nit
Tender For air cooled ducted 16.5 tr ac unit , air cooled ducted 5 tr ac unit , unloading lifting and shifting of 16.5 tr ducted package ac unit at site , unloading lifting and shifting of 5 tr ducted package ac unit at site , installation n2 pressure testing vacummising and commissioning of 16.5 tr ac , installation n2 pressure testing vacummising and commissioning of 5 tr ac , supply and charging of r 410 gas , supply and inst of floor mounted ms stand fabricated out of ms channel , supply and inst of floor mounted ms stand fabricated out of ms angel , hard copper refrigerant piping between indoor and outdoor units , supply and installation of gss ducting as 24g , supply and installation of gss ducting as 22g , acoustic insulation of plenum initial ducting with 10mm thick armasound , supply and fixing of 13mm thick nitrile rubber al foil faced insulation class i , supply and installation of ai powered jet nozzles with volume control damper , supply and inst of ai powered return air grills without volume control dampers , supply and installation of gi opposed blade duct dampers, qty 1.5 sqmtr , supply and fixing of canvas connection , supply and laying of 32mm dia pvc drain piping , electrical cabling 6 c x 1.5 sqmm cu flexible , electrical cabling 3 c x 1.5 sqmm cu flexible , electrical cabling 1 sqmm cu flexible double earthing * /bid number : gem/2026/b/7581741 + /dated: 11-06-2026 ' ' / bid document 1 / 24
Tender For supply of lv7 xenon nk 00000000000000000 link rod large xenon , lv7 xenon nk 00000000000000000 link rod small xenon , lv7 re nk 00000000000000000 chain sprocket set , lv7 tmb nk 00000000000000000 temp sensor unit , lv7 tmb nk 00000000000000000 rpm meter , lv7 2 5 ton nk 00000000000000000 wiper wheel box , lv7 mg nk 00000000000000000 ht lead , lv7 re nk 00000000000000000 ignition switch , lv7 mpvy nk 00000000000000000 pneumatic pipe , lv7 2 5 ton nk 00000000000000000 timing oil seal , lv7 2 5 ton nk 00000000000000000 oil seal 7808 , lv7 2 5 ton nk 00000000000000000 pilot bearing , lv7 2 5 ton nk 00000000000000000 gear box oil seal , lv7 re nk 00000000000000000 rear brake shoe , lv7 mpvy nk 00000000000000000 main leaf frt , lv7 re nk 00000000000000000 link rod brake pad , lv7 sumo nk 00000000000000000 spring bush , lv7 sumo nk 00000000000000000 u bolt , lv7 sumo nk 00000000000000000 rod spring , lv7 2 5 ton nk 00000000000000000 field coil assy , lv7 mg 33920m80cs0 controller assy epi , lv7 mg nk 00000000000000000 damping pad , lv7 mg nk 00000000000000000 starter motor , lv7 stln nk 00000000000000000 knuckle bearing , lv7 stln nk 00000000000000000 head gasket , lv7 tmb nk 00000000000000000 temp sensor unit army bus , lv7 sumo nk 00000000000000000 head gasket , lv7 2 5 ton nk 00000000000000000 bush set , lv7 mpvy nk 00000000000000000 pneumatic valve , lv7 mg nk 00000000000000000 suspension bush set , lv7 mg nk 00000000000000000 element air cleaner , lv7 scorpio nk scorpio 0007 fuel filter , lv7 scorpio nk scorpio 101069 hose steering , lv7 scorpio nkscorpio015 belt 4 pk , lv7 scorpio nkscorpio029 bush silent block , lv7 innova nk 00000000000000000 disc clutch , lv7 innova nkinnova589 cover assy clutch , lv7 innova nk 00000000000000000 fuel pump motor , lv7 innova nkinnova0011 bearing clutch release , lv7 innova nk 00000000000000000 intake manifold , lv7 innova nk innova 010 nozzle , lv7 innova nk 00000000000000000 fuel filter , lv7 innova nk 00000000000000000 fuel pipe , lv7 innova nk toyato 03 air filter , lv7 innova nk innova 018 power window controller , lv7 innova nk innova 0012 brake pad , lv7 innova nk toyato 04 ac belt , lv7 innova nk innova 0021 brake shoe , lv7 innova nk innova 017 power window switch , lv7 innova nk 00000000000000000 oil filter //bid details 2 / 44
Tender For corrigendum : purchase of equipments for dmt department lab - purchase of equipments for dmt department lab, fanuc cnc simulation trainer kit system type: standalone cnc simulation trainer with integrated hardware panel functionality: switchable milling (3-axis) and turning (2-axis) simulation cnc control: original fanuc control system or officially licensed equivalent software: manual guide i (licensed version) for conversational programming and 3d simulation programming: supports g code (iso standard) and conversational programming storage: minimum 512 kb program storage with at least 400 programs tool offsets: minimum 32 pairs coordinate system: g52 g59 with minimum 48 additional work offsets (milling) display: minimum 10 color lcd input: full qwerty keyboard connectivity: usb, ethernet interfaces: rs232 / i/o link power supply: 100 240 v ac, 50 60 hz power consumption: 100 w construction: industrial grade trainer unit , robotic arm controllerdegrees of freedom: 6 dof payload: minimum 250 g at full reach reach: minimum 350 mm repeatability: 0.2 mm or better controller: industrial-grade controller (arm cortex-m4 or higher / equivalent architecture) programming: supports gui based and programming (python / c++ / equivalent) vision system: integrated camera with ai-based object detection capability communication: usb and serial communication software: licensed software compatible with windows os end effectors: minimum 3 (gripper, suction cup, pen holder) safety: emergency stop, limit protection power supply: 100 240 v ac, 50 60 hz, optical digital microscopemagnification: 40x to 400x digital camera: minimum 5 mp resolution display: pc/monitor via usb/hdmi or built-in display illumination: adjustable led illumination focus: coarse and fine focusing mechanism optics: coated lenses with wide field view stage: mechanical stage with slide holder software: image capture, measurement, and analysis software included connectivity: usb / hdmi /ethernet power supply: 110 240 v ac, 50 hz, portable surface roughness tester parameters: ra, rz, rq, rt measuring range: ra: 0.005 16 m rz: 0.02 200 m resolution: 0.01 m accuracy: 5% or better stylus: diamond tip ( 5 m radius) cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm display: digital lcd output: usb interface for pc connection standards: iso 4287 / din / ansi compliant power: rechargeable battery