Latest air heater tubes Tenders | Government air heater tubes Tenders

CTN :45716965

13 Jul, 2026 3.27 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for remove the worn out runners from the main bagasse carrier bagasse elevator and return bagasse carrier errect 8x65 10x50 mm flat iron bars in their place clean the welded areas using a grinder , cut and remove the worn out bottom plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect new 6 8 10 mm , cut and remove the worn out side plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect 6 8 10 mm plates satisfactory trial run , cut out and remove the damaged and weak sections of the main bagasse carrier fabricate and errect a new assembly including the gear shaft system using the supplied plate , cut out and remove the weak and corroded sections of the bagasse feeding chutes errected boilers fabricate and replacements using the provided plates and repair the associated shafts and gears , the casings of the boiler id and fd fans have become severely weakened and damaged the task involves cutting away and removing the weakened sections fabricating , cut and remove the deteriorated side bottom and top plates surrounding the air heater of boiler no. 3 fabricate and errect new plates using the specified 6 8 mm plate in their original positions , fully strengthen the air heater plates and conduct a satisfactory trial. , dismantling the old air heater tubes of boiler no. 01 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 02 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 03 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , a. dismantling old columns beam channels etc. b. manufacturing and installing new columns beam channels , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to twenty hp , dismantling fabricating and erecting weak corroded pipe lines up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 and providing a satisfactory leak proof trial. , removing the old corroded platform and replacing it with a new one

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

State Government

CTN :45699708

16 Jul, 2026 1.61 Lacs

Korba - Chhattisgarh

Tender For work contract of application of rtv silicon sealants in air heater tubes of 210mw abl boilers during aoh of u#3, htps, korba west.

Corporations And Associations And Others

CTN :45402417

02 Jul, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : e-tender for purchase of boiler tubes/ibr tubes/air heater tubes - common e-tender for all nine working csm in punjab for purchase of boiler tubes/ibr tubes/air heater tubes.

CTN :45675374

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 control terminal block 16 mm 03 nos. 2 hp/lp cut out 05 nos. 3 scrap scroll compressor 10 nos. 4 scrap blower motor, 1.5 hp, 1400 rpm with top 18 nos. 5 scrap condenser fan motor, 1 hp, 1400 rpm with top 18 nos. 6 ss welded round guard 03 nos. 7 dryer filter (1.5¿ solder type) 29 nos. 8 hartige ( coupler) connector 24 pin 46 nos. 9 hartige ( coupler) connector 16 pin 20 nos. 10 dumper actuator 5 nos. 11 male female plug and socket for dumper actuator 5 nos. 12 pressure transmitter ( 0-10 bar) 20 nos. 13 pressure transmitter ( 0-40 bar) 26 nos. 14 glass bulb cartridge 130 degree 59 nos. 15 scrap esti switch assembly with cartridge 9 nos. 16 air heater set consisting 400 watt ( 15 nos.) coil with insulated backelite sheet 3 nos. 17 scrap low pressure control switch (auto reset) 38 nos. 18 scrap high pressure control switch (auto reset) 50 nos. 19 scrap control pressure switch (auto reset) 24 nos. 20 expansion valve 22 nos. 21 hp gauge (0-40 bar) 13 no. 22 lp gauge (0-10 bar) 13 no. 23 set point generator switch 5 nos. 24 top cover (part-i inside) 4 nos. 25 hygrostat 35-100% 8 nos. 26 scrap compressor contactor -type ls-1 bk 00 dc 110 volt 44 nos. 27 scrap condenser motor contactor -type 1.54k10e dc 110 volt 37 nos. 28 scrap blower motor contactor -type 1.54k10b dc 110 volt 27 nos. 29 dc-dc converter for flapper motor, 110 v/24 v , 1.5 amp 3 nos. 30 bottom cover (part-i inside) 4 nos. 31 electronic controller (srmc-20) 5 nos. 32 top cover (part-ii inside) 4 nos. 33 multifunctional monitoring relay, 750 volt 33 nos. 34 scrap dc-dc converter , 110 v/24 v, 20 amp/1.5 amp 20 nos. 35 return filter, fresh air cassette filter 73 nos. 36 scrap bush bearing clutch plate, commutator, carbon brush holder including carbon 4 nos. 37 bottom cover (part-ii outside) 4 nos. 38 b-check kit for dg 14 set 39 solenoid switch of self-starter 2 nos. total ferrous - 958 kg total copper - 71 kg

Central Government/Public Sector

CTN :45619737

29 Jun, 2026 NA

Sonpur - Bihar

Tender For auction sale of depot miscellaneousllaneous scrap - dms-scrap-ghz, lot no-342605005, scrap electrical & signaling miscellaneous item like geyser body,stabilizer,cooler body, charger,fuse monitoring system, axle counter, room heater, changer, megger machine, tumble switch, halogen filament, tx-rx coil, mini pantry lhb ac, berth light fitting, ammeter, control transformer, pump controller, emergency light, sphygnomanometer, stethoscope, temperature gun, suction machine, cardiac monitor, deep fridger, nebulizer machine, multimeter projector, vhf charger, insulation tester, iron battery container, tube light, photo state machine, panel body, light cover, led bulb, rru, scroll compressor with or without oil, led signal all type, tube light cover, halogen bulb, fan rod, fan blade, electric energy meter, sound box, tricolor torch, choke, current regulator, multipurpose dry cell battery-1.5v (type r 20), water cooler, refrigerator body, water purifier, elb gear box, starter, earthing device, street light, phase selector, hs meter, flood light fitting, mcb switch, holder off size, fan condenser off size, tf charger, speedometer, transformer body, ac operating panel body, cooler stand, transmitter receiver, tlbi, x-ray machine stand, speaker, oxygen cylinder with flow meter (ss), platform display board, display unit, gate hooter, telephone card, battery charger and other similar type items with or without nf attachment broken, damaged, rusted etc. location-stack a-south side of office garden near over head electric bridge. stack b- south side of office garden about 50 mtr near both side of pakka road. stack c-about 15 mtrs. west of rb section t-point. stack d- east side of ledger section about 40 mtr near kachcha road. stack e- inside old scrap office.

Central Government / Public Sector

CTN :45591757

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

CTN :45571051

02 Jul, 2026 NA

Jalandhar - Punjab

Tender For replacement of air heater tubes - dismantling & fitting of air heater tubes

CTN :45571053

02 Jul, 2026 NA

Jalandhar - Punjab

Tender For external and internal cleaning and checking of air heater tubes of boiler no. 1&2

Central Government/Public Sector

CTN :45343198

02 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For auction sale of others - released condemned and u/s scrap contain ferrous, copper, aluminum and pvc consisting, (1) rotary switch all size (16,63a etc), qty- 23 nos, (2) contactor all size (16,32a etc), qty- 30 nos, (3) led light fitting 18w/9w, qty-118 nos,(4) led light fitting b1, qty-110 nos, (5) led tube 9w, qty- 293 nos, (6) pcb for bldc fan 400 mm sweep, qty- 68 nos, (7) tail lamp fitting 110v, qty-07 nos, (8) return air filter 680 mm x 415mm, qty- 70 nos, (9) ac filters all size fresh & return air 620mmx 460 mm & 550mmx 500mm , qty-70 nos, (10) fresh air filters 480mm x 260mm, qty-120 nos (11) compressor scroll r22/r 407, qty- 20 nos, (12) led driver 9w & 18 w, qty-213 nos, (13) mcb & mpcb all size (6,16,32,63a etc). qty- 122 nos, (14) voltmeter 1000v/750v, qty-58 nos, (15) mmr 1000v, qty- 69 nos, (16) electronic thermostat 2-5 w, qty- 04 nos, (17) bldc fan 110 v dc, qty-170 nos (18) rmpu unit 7tr, qty- 02 nos, (19) mini pantry (hot case, 500w), qty- 16 nos, (20) mini pantry (deep freezer,25 ltr), qty- 16 nos, (21) condenser fan blade 21 inch/24 inch, qty-13 nos, (22) feeder contactor for lhb 1000a, qty- 03 nos,(23) contactor 200amp all, qty-22 nos, (24) regulated battery charger 6.5 kw, qty- 01 nos, (25) refrigerator 240/310 ltr, qty- 05 nos, (26) emergency battery charger 2.5 kw, qty-20 nos, (27) control transformer 100va 750v, qty- 40 nos, (28) control transformer 200va, qty- 19 nos, (29) control transformer 400va, qty-04 nos, (30) control transformer 300va, qty- 01 nos, (31) rc filter 415v, qty-24 nos, (32) control led driver pcb, qty-10 nos, (33) uic coupler 13 pin, qty- 43 nos, (34) heater unit complete, qty- 03 nos, (35) d.m plant, qty- 02 nos, (36) alternator 25 kw, qty-02 nos, (37) erru 25 kw, qty-02 nos, (38) 25 kva inverter, qty- 02 nos, (39) spare contactor coil 250v500 ac/dc, qty- 03 nos, (40) capillary 5 way, qty- 01 nos, (41) cfl 4 pin, qty- 50 nos, (42) deep freezer, 100/200 ltr, qty-01 nos, (43) condenser motor 3 ph 415v, qty- 10 nos, (44) mono block pump 3 ph 415v, qty-10 nos, (45) cooling coil lhb, qty-04 nos, (46) condenser coil lhb, qty-04 nos, (47) contactor k44 200a, qty-33 nos, total qty-11720 kg(11.720mt), location- coaching depot indore. mode of delivery by actual weighment basis and on as is where is basis, cutting permitted, custodian- sse-ac-tl-indb, fdp-50 days. note- original e-waste certificate cum passbook will be required at the time of delivery.

Air Heater Tubes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Corporations And Associations And Others

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector