Latest air valves Tenders | Government air valves Tenders

State Government

CTN :44803835

15 Apr, 2026 1.95 Crore

Multi City - Telangana

Tender For arresting water supply leakage and replacing the damaged 200mm dia/300mm dia ms air tee pipe manifolds existing on 700mm and 300mm dia flanged stem pipe, 200mm dia sluice valves and air valves existing on ms 2375mm dia pumping main and 2200mm dia ms gravity main of kdwsp phase-iii from kodandapur to sahebnagar and also to replace the damaged ms air tee pipes, 200mm dia air valves and sluice valves during emergency on krishna phase-i and ii system from kodandapur to sahebnagar under sd-i of trans.div.iii, sahebnagar

State Government

CTN :44805793

17 Apr, 2026 8.00 Lacs

Jodhpur - Rajasthan

Tender For proposal for maintanence of 600mm di pipeline air valves and other allied works under csd kabeernagar city div i jodhpur

corporations/Associations/Others

CTN :44796518

13 May, 2026 816.21 Crore

Raichur - Karnataka

Tender For survey, investigation, preparation of design & drawings, installation, testing and commissioning of lift headworks, electrical sub-station, transmission line, terminal bay, rising main, delivery chamber and construction of pipe distribution network including structures and scada compatible sluice valves, butterfly valves, flow meters, discharge control meters and air valves, scour valves, butterfly valves, discharge control meters providing intermediate sump wherever necessary in complete manner etc piped distribution network for 19,600 ha. of command area of pamanakallur and other villages in maski taluk of raichur district from distributary 5a of narayanpura right bank canal including supply of spares, accessories and tools including operation and maintenance of the entire system for five years from the date of successful commissioning of the entire system on turnkey basis.

CTN :44776302

17 Apr, 2026 1.27 Crore

Sonipat - Haryana

Tender For 1228 - rectification of leakage, disconnection of insanitary connection and repair of ac/pvc/hdpe/gi/ci/di rising and distribution pipe line including main pipeline from maharana partap to jajjal mbs, air valves and sluice valves of all sizes - 1228 - rectification of leakage, disconnection of insanitary connection and repair of ac/pvc/hdpe/gi/ci/di rising and distribution pipe line including main pipeline from maharana partap to jajjal mbs, air valves and sluice valves of all sizes in all colonies of sonepat town and villages covered in eastern side of railway line under mc sonepat and relaying of cement concrete etc. and all other works contingent there to for 1 year.

corporations/Associations/Others

CTN :44352790

11 May, 2026 7.54 Lacs

Madurai - Tamil Nadu

Tender For corrigendum : extending 4 nos. of air valves including dismantling of exisiting air valve chambers and construction of new chamber etc. in raw-water transmission main of mullai periyar water supply scheme.

CTN :44537994

15 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of 25brsc001 spares of various types of ro plants e e -thermister overload relay , filter pump shaft seal , split cone with nut , oil filler cap , conductivity meter with sensor , abs service kit ro 8107 , 825 mm long hose , victualing coupling gasket , pressure gauge , flow meter , 575 mm long hose , 930 mm long hose , 1000 mm long hose , cartridge filter complete , servo motor control valve 230v 3 8 , solenoid valve ve83 , pressure transmitter , pressure transmitter , flow switch , running time meter , main control switch , relay , charging plug , seal ring charging , split pin , repair kit for pre filter pp , abs service kit , globe valve sampling cock pvc 1 4 bsp f , quick acting coupling , ss service kit for ro 510 5s 10s , pulley for pump , taper bush 1610 bore 24 mm , taper bush for hp pump motor , bearing hp motor , bearing hp pump , hp motor bearing nde , valve kit for hp pump , oil seal , manifold head , valve kit con 6 no 206535 206536 206537 206538 206539 206540 , cylinder screw , spring washer , bearing cover , radial seal for plunger rod , pressure ring p30 43 130 , pressure spring , shim 1 2 circle bearing case , oil seal crank case , hp pump discharge manifold , coil spring 70 kg , anode plug zinc anode , tee pu4 , 1 4 mxpu4 elbow , 1 4 fxpu4 elbow , cartridge filter element , cartridge filter housing 20 , cartridge filter assembly 20 , nozzle set for frp filter 1354 , media for sand filter grade i , support gravel 1 5 3 0 mm , support gravel 2 0 3 0 mm , hp pump c case oil , jubilee clips 00 13 mm to 20 mm , handle , flexible tube pl4 , dt module service exchange 3 tpd ssk subs , dt module service exchange 5 10 20 30 tpd opv , lip seal dt module , o ring for head distributor assembly , o ring distance fitting inside , hp flexible hose , high pressure hose l800 , rubber hose 20mm , hose 20mm with threaded end connections , lp hose for air line , hp pump driving belt set , h p pump driving belt set of 2 , coupler for victaulic coupling 1 , belt spanner , pressure switch , valve set , prefilter filter pump shaft seal , sleeve gasket , mechanical seal p 105 , sleeve gasket p 37 , neck ring p 45 , ring circle p 931 , o ring , prefilter pump , anode plug , valve kit , seal kit , seal oil crankshaft , rod connecting assy , o ring crankcase cover , seal oil crankcase , retainer seal 2 pc , adapter male , spacer v packing , plug for priming , mainfold discharge , seal kit , valve kit , anode plug , o ring oil filler cap , seal ring charging screw , o ring for head distributor assembly , o ring cartridge filter housing , cartridge filter element , filter element , o ring hp connection , groove ring gasket flange , hydraulic disc , dt module service exchange , gf pvc u fitting pipe clips d25 , abs solvent cement 100 gm , ball valve 2 way 20mm , abs ball valve 2 way 25 mm , abs ball valve 2 way 32 mm , hp elbow 1 for smcv , pl4 pipe , pu 4 hose , pu9 pipe , victualic coupling 1 , victaulic couplings 1 1 4 , coupler for vict coup1 , pipe clamp 32 mm 2 bolt , permeate male elbow , pvc elbow 1 4 xpl4 , pvc tee pu 4 , connector straight , smcv spindle & seat , smcv valve spindle unit , solenoid valve 3 8 f 2 way ve83 , sampling cock , ball valve ss316 1 2 bspf wp 70 bar , non return valve pvc 3 8 , mcb 2a , thermostat , hrc fuse 2 amp , main control switch 63a , pressure gauge 0 10 bar , pressure transmitter 0 100 bar , cleaner for membranes 11 , cleaner for membranes 22 , cleaner for membranes 33 , temperature indicator , rubber hose 20mm , lp hose 25mm id bare hose , lp hose 25mm idx1 bspmx500l ss316 , lp hose 32 mm id bare hose , lp hose 32mm , hp hose to module , hp hose to smcv , hp hose module out , hp flexible hose , high pressure hose module outlet , hp hose of module in , hp hose raw water brine 2500l , hp pump crank case oil , belt spanner , jubilee clips 00 13mm to 20 mm , jubilee clips for d 25 , ss jubilee clips for dn 32 pipe , ss jubilee clips 2x 45 mm to 60 mm , jubilee clip

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44742138

17 Apr, 2026 4.00 Crore

Anandpur Sahib - Punjab

Tender For estimate providing gravitational distribution system network vill gambhirpur, surewal, dher etc in changer area of shri anandpur sahib incl. supply,installation, testing ,commissioning of various valves fittings, air valves etc. complete all respect - estimate for providing gravitational distribution system network for villages gambhirpur, surewal, dher etc in changer area of shri anandpur sahib including supply, installation, testing and commissioning of various valves fittings, air valves etc. complete in all respects

CTN :44726263

01 May, 2026 NA

Ernakulam - Kerala

Tender For tender for supply of v belt sea water pump ax56 , supply hand pump 3000072 , pipe injector over flowa a bank , pipe , strainer l ooo filler neck , hexbolt m8x1 25x95 8 8cl , ring round cord , screw plug , sleeve , rotor gear lo pump drysun , pipe air starting , pipe union , cap , impeller , key for impeller , washer , paper insert oil centr fug , spares kit unpack sea water pump , rubber ring for he 8 shel , hexagon screw , screw m 12x60 , hexagon screw , hexagon screw m10x1 5x30 10 9c , hexbolt m16x1 5x65 960 8g , screw hexagon , bolt m16x1 5x75 cl 10 9 , screw allen , stud m8x1 25x25mm 8 8 cl , hexagon nut , washer spring srl no 6 16 , spring ring , cylinderical pin 32 , dowel pin 33 , spring dowel pin m6x24mm 34 , grooved dowel pin 35 , ring locking 36 , ring locking 37 , ball bearing 38 , ball bearing 39 , valve starting air 40 , washer copper 41 , safety valve l o f head 42 , zinc anode 43 , cylinder liner 44 , ring set 45 , lub oil pump shaft 46 , lub oil pump shaft 47 , d pin bearing cap sur nitrid 48 , rod push 49 , gear wheel front 50 , support of rocker arm complete 123206100037 51 , cover 52 , gasket 53 , gasket shaped 54 , lub oil pipe 55 , lubricating oil pipe 56 , nest tubes v12 oilcooler 57 , support plate 58 , fuel off solenoid 59 , pipe flex inj o flow resistant 550l 60 , pipe flex flame res 1500l banjoswelling 61 , pipe flex flameres 800l 62 , fuel filter element coarse 63 , gasket 64 , gasket swp in out 65 , set of o rings 66 , set of copper washers 67 , set of flex fuel pipes fire resistant 68 , screw adjusting rocker 69 , hex screw 70 , bolt 71 , spring washer 72 , valve spring inner 73 , ring locking 74 , screw banjo 9411033404 75 , gasket 76 , washer copper 77 , ring cord round 78 , o ring 79 , o ring 80 , o ring 81 , o ring for cylinder liner 82 , filter disposable 83 , banjo screw 84 , con rod bolt 85 , gear wheel front 86 , washer packing 87 , pipe air starting 88 , plug 89 , cylinder head 90 , v belt a 54 cogged 91 , gasket for he 8 shell 92 , hose piece 93 , screw hex 94 , screw allen 95 , shc screw m10 x1 5x20 96 , clamping element 97 , flex pipe hand pump 98 , stud 99 , stud bolt 100 , stud bolt 101 , spring washer 102 , spring washer 103 , gasket shaped 104 , gasket 105 , hose 80x70 106 , gasket 107 , o ring 108 , breaker 100a circuit moulded case 415v 109 , hexegon screw m14x2x60 8 8 cl 110 , o ring 111 , filter cartridge 112 , connecting rod assy 113 , dipstick 114 , o ring 115 , valve seat exhaust 116 , cam shaft assembly v12 117 , kit repair for k 27 118 , coupling flange 119 , valve cone exhaust 120 , segmentsur nitr treat 121

Air Valves Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others