Latest air brake cylinder Tenders | Government air brake cylinder Tenders

Central Government/Public Sector

CTN :40946774

16 Jul, 2025 NA

Nagpur - Maharashtra

Tender For supply of universal test bench for airbrake components (cut off angle cock, 3-way dirt collector, isolating cock, non-return valve, load sensing device, automatic pressure modification device) & computerized test bench for conventional air brake cylinder (355mm & 300mm) as per attached annexure-1, annexure-2 and specifications.

Central Government/Public Sector

CTN :40946146

28 Jul, 2025 NA

Latehar - Jharkhand

Tender For supply of 203 mm air brake cylinder (with slack adjuster) with 32mm stroke for all main line coaches to rdso drawing no. sk 81200, alt.5 and rdso specn. c-k-013 (except item no.17,18 and 19)

CTN :40939696

14 Jul, 2025 NA

Hisar - Haryana

Tender For supply of repair overhauling of gen set,repair of fuel feed pump,repair of stopper assy,replace of piston ring set,checking and threading of piston sleeve assy,replace of connecting rod,replace inlet valve,replace of exhaust valve,threading of crank shaft,replace of rocker arm,repair of oil pump,replace of injector nozzle

CTN :40940150

08 Jul, 2025 NA

Dehradun - Uttarakhand

Tender For supply of hooter,rep kit for wheel cyl,bush king pin,arm assy kick starter,coolant pump assy,brg ball,chain and sprocket kit,throttle cable assy,kick starter crank,pulley,compressor assy,armature assy,solenoid switch,relay starter solenoid

CTN :40916642

11 Jul, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of talc sheet , alternator assy , head assy , rocker arm assy , over flow pipe with benjo nut , engine mounting pad , avr , head gasket , over flow pipe , overflow benjo bolt , crank shaft oil seal , fuel pump assy , exhaust fan

Central Government / Public Sector

CTN :40932789

24 Jul, 2025 NA

Secunderabad - Telangana

Tender For supply of 203 mm air brake cylinder with slack adjuster for emu trailer (hcc /non-hc c), motor coaches, memu (dmu & tc ) , demu (dpc) and main line gs and slr coaches ( wor king stroke - 40 mm) conforming to rdso spec. c- k013, rev. 1, drg no : rdso/sk-81200 , al t. 5 and rdso sk- 81057,item-2 in note-2,alt.11, type drg: rdso. [ warranty period: 30 month s after the date of delivery ]

CTN :40885825

19 Jul, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of reqmt of 15 kva generator spares e e - x3 nk 15kva 001 piston assembly , x3 nk 15kva 002 piston rings , x3 nk 15kva 003 sleeve , x3 nk 15kva 004 cylinder head assembly , x3 nk 15kva 005 rocker arm , x3 nk 15kva 006 double cylinder fuel injection pump , x3 nk 15kva 007 push rod , x3 nk 15kva 008 cr bearing std , x3 nk 15kva 009 crank shaft , x3 nk 15kva 010 nozzle , x3 nk 15kva 011 overhaul gasket

CTN :40886653

08 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of tank water reserver , cover assy clutch , disc clutch , spark plug , switch assy backup lamp , fog light assy , dearation tank , oil filter , front wheel brg , oil seal , assy hose , trafficator assy , carburator assy , oil seal crank shaft , hose assy , air filter , wiper blade , kick joint arm , gasket , flasher unit , master cyl assy , brake shoe liner

Co-operative

CTN :40828519

03 Jul, 2025 1.50 Lacs

Bahraich - Uttar Pradesh

Tender For skscm/supply of sugar bag stiching maching spares/2025-26 - particulars, throat plate, feed dog, needle bar with nut, presser foot assembly, bug set, screw set, ball joint assembly, feed ecc. rod, connecting link, feed ecc cam small & big, main shaft, needle gb-250 (big), looper, tunion assembly, looper drive ecc. assembly, feed ecc. fork assembly, connection, connecting stud, looper drive lever, needle lever, sprocket 7 teeth, sprocket 16 teeth, driving chain, feed left with block, feed shaft connection, arm shaft, double action foot switch, slate chain complete with roller, presser bar with spring, roller for slate, return roller, foot switch, super stiching high speed head, control panel, looper rocker assembly, looper avoid ecc. assembly, feed bar, needle bar connection, feed rocker, needle bar connecting link, rocker for looper drive lever shaft, bush set, pressure bar, feed drive ecc assembly, feed regulating stud assembly, pulley for stitching machine, crank shaft assembly, crank connecting rod assembly, shell assembly, needle lever upper bearing assembly, needle thread guide, feed rocker shaft, feed bar shaft, m.s slate for conveyor, return roller shaft complete, counter sunk screw complete, m.s chain for conveyor, end bracket complete for driving side, end bracket complete for rear side

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

Air Brake Cylinder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Co-operative