Latest air break contactor Tenders | Government air break contactor Tenders

Central Government/Public Sector

CTN :45731254

09 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of lifting tackle for bg locomotive wheel set assembly with bull gear, as per rdso drg. no. skdl- 4511 alt-1 or latest. set consisting of (1) base plate, qty- 01 no. (2) gusset plate, qty- 04 nos. (3) ms flat (30 x 10 mm thick), qty- 02 nos. (4) strengthening plate, qty- 02 nos. each set consists of 04 items 09 nos only. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government/Public Sector

CTN :45710554

08 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For x/6620/2026/0341b/1 cutting of plates - gusset plate1, gusset plate2, gusset plate3, gusset plate4, gusset plate5, gusset plate6, gusset plate7, gusset plate8, gusset plate9, gusset plate10, gusset plate11, gusset plate12, short support plate1, short support plate2, long support plate1, long support plate2, short support plate3, short support plate4, long support plate3, long support plate4, support1, support2, plate, end plate1, end plate2

CTN :45743720

09 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bolster bottom gusset. drawing no : wd - 90030 - s - 55, alt. 6, item no. 6. [ warranty period: 30 months after the date of delivery ] note: supplier should drill 4 holes for 22mm dia rivets onbolster bottom gusset (location of holes as mentioned in drawing) and supply accordingly. [ warranty period: 30 months after the date of delivery ] ]

CTN :45703728

11 Jul, 2026 2.41 Lacs

Bulandshahr - Uttar Pradesh

Tender For supply of electrial goods 1 b b - pvc , alluminium lug , alluminium lug 35 , alluminium lug 50 , alluminium lug 70 , alluminium lug 16mm , copper lug , empire tape , cotton , pt bulb , copper , gaugering , kit kat fuse base 16amp , kit kat fuse base -32amp , cartridge fuse 63amp , gaugering 25amp , continuty tester , dz fuse cap 63amp , dz fuse cap 25amp , crc 26 , cartage fuse 25amp , sm type fuse base 63amp , cartidge fuse base 63amp , cartidge fuse base 25amp , sm type fuse base 32amp , air break contactor 3ta 24 , siemens spares , auxillary block 3ta 24 28 , led bulb 9watt , three pin top 15 amp , carbon brush 20 20 100 , ampere meter 48 48 mm , amp meter 300 5 amp selec make , 6 mfd condensor , 10 mfd condensor , c t 150 5 a e make , 250 amp moving bridge , 630 amp moving bridge , taparia 814 make phase tester , 4 mfd condensor , push button mushroom type red , push button mushroom type green , 33 mfd condensor , 3 15 mfd condensor , arching contact 800 amp for ocb

Central Government/Public Sector

CTN :45710527

08 Jul, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap heavy-sheet of foot plate, gangway bridge, fall plates, gusset plate and heavy sheet (mixed material)of sorts and sizes with or w/o attachments us and ur. loc- lying at bin no. c-46 in scrap yard judw. remarks-(1)loading by purchaser. (2)private road crane allowed for loading purpose only. note- ferritic steel will be taken back if found in lot at the time of delivery.

State Government

CTN :45705895

30 Jun, 2026 NA

Pinjore - Haryana

Tender For cement plaster (in fine sand) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) ,steel door/ window frames and shutters providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 1. using m.s. angels 40x40x6 mm for diagonal braces, sigle/built-up steel/tubular sections steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level a,brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. cement mortar 1:4 (1 cement : 4 coarse sand)

State Government

CTN :45694285

06 Jul, 2026 80.98 Lacs

Umaria - Madhya Pradesh

Tender For procurement of critical spares of tg set for aoh of unit no. 3 and 4, at sgtps, mppgcl, birsinghpur. - hp shaft sealing front as per tender schedule, sealing ring, sealing ring, sealing ring, hp shaft sealing rear as per tender schedule, sealing ring, sealing ring, sealing ring, ip shaft sealing rear as per tender schedule, sealing ring, ip shaft sealing front as per tender schedule, sealing ring, lpc front shaft sealing as per tender schedule, sealing ring, sealing ring, lpc rear shaft sealing as per tender schedule, sealing ring, sealing ring, bearing yoke keys, fitted key for brg. no. 1 yoke bottom, fitted key for brg. no. 1 yoke side, fitted key for brg. no. 2 yoke bottom, fitted key for brg. no. 3 yoke bottom, fitted key for brg. no. 3 yoke side, fitted key for brg. no. 4/5 yoke bottom, fitted key for brg. no. 4/5 yoke side, radial and axial keys as per tender schedule, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key fb pedestal, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-fr) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (axial) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key for hp rear bearing pedestal (radial-rr) as per tender schedule, fitted key ( hp rear brg pedestals), fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (axial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key for ip casing rear (radial) as per tender schedule, fitted key l -196 (radial gusset block in condenser), key l-78, fitted key ip inlet insert as per tender schedule, fitted key ip inlet insert as per tender schedule, fitted key ip extraction connection, fitted key ip casing assembly, key ip casing assembly, fitted key (hp seal), fitted key for hp casing (radial), fitted key for hp casing (axial), brass sealing strip 8x2x845, brass sealing strip roll 8x2, stud m24 x 250 for ms/hrh strainer with hex nut & washer, coupling bolts m56 x270 for hp/ip, coupling bolt m64x335 for ip-lp, clamping piece for lp turbine, locking plate 7th stage for lp turbine, locking plate 8th stage for lp turbine, helical compression spring, fasteners, stud m52 x 220- 20 x185 modified, stud am64 x 305- 20x248, stud am 72x06x320 25x257, stud am 72x06x520 25x308, stud am 72x06x380 25x252, cap nut m52 for hp inner casing, cap nut pm 64, cap nut pm72 x 6, screw hex m 36x180, screw hex m 30x110, mop spares, bearing bush, bush, mop impeller ring dia 185, governor impeller ring dia 106, o ring, shaft check nut 30x1.5, sealing ring, .

Central Government/Public Sector

CTN :45702729

10 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For auction sale of others - condemned, released & un-serviceable x frame angles gusset plate and rivets.-33.496mts.[ total-33.496mts] location-available at in front of sse/bri/mdu office. not for sale:-nil. note-[1] delivery to be made on ¿as is where is and actual weighment basis only.[2] in all cases, i.e. poclain/jcb//crane loading/ manual loading, the purchaser (by engaging his own labourers). cuttings are permitted to loadable sizes and hand over the non-ferrous (if any) and excess quantity to the custodian,[3]any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian as nfs. s1539. udm lot no.089217-26-00053 dt.09.05.26 hsn code no. 72044900.

CTN :45683038

07 Jul, 2026 NA

Ratnagiri - Maharashtra

Tender For supply of air break contactors 240v a.c 50 hz 2 or 3 pole as commercially available 150a with 2no and 2nc auxiliary contacts. make yule l and t c and s or similar as per is29591985 dimensions 208x 171 x 202 mm (l x w x h) with 2no+2nc [ warranty period: 30 months after the date of delivery ] ]

Air Break Contactor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector