Latest air cooling fan Tenders | Government air cooling fan Tenders

Central Government / Public Sector

CTN :40753985

09 Jul, 2025 NA

Bongaigaon - Assam

Tender For corrigendum : custom bid for services - refurbishment and dynamic balancing of hgu id fan (82-id-001) rotor tender no bns25ml114-1..1 dismantling of rotor and inspection of each elements installed in it. iocl representative may be called up for joint inspection at vendor workshop 1.2 vendor shall produce detailed inspection report and recommendations for repair/replacement of parts 1.3 spares like impeller seal, bearing housings, bearings may be replaced if required, payment for spares shall be paid in extra 1.4 vendor shall arrange for blasting and painting for rotor parts as required and as per tlt guidelines 1.5 vendor shall assemble rotor 1.6 dynamic balancing of rotor is required to be carried out and detailed report shall have to be submitted. any jobs required for successful dynamic balancing has to be done by vendor (payment is inclusive in refurbishment) 1.7 vendor shall provide dynamically balanced ready for installation rotor. any job not mentioned in scope of work shall have to be carried out by vendor for successful refurbishment of rotor (except in case shaft or impeller replacement) 1.8 vendor shall carry out necessary maintenance at their workshop and send rotor back to iocl bgr along with documents required as per approved qap vendor shall submit detailed qap for review by iocl and also offer for thorough inspection by iocl for dismantled parts and assembly of rotor 1.9 transit insurances for rotor for travel towards bongaigaon refineryin included in vendor scope.

corporations/Associations/Others

CTN :40927063

10 Jul, 2025 NA

Durgapur - West Bengal

Tender For magnetic particle examination of the welding joints between id fd fan impeller holding hub and fan shaft of unit 4 and unit 6 or any two units of bms 1to 6 by m/s cmeri durgapur during overhauling period

CTN :40629829

30 Jul, 2025 NA

Rupnagar - Punjab

Tender For corrigendum : procurement of spares for id fan impeller housing (type an 25e6)

Central Government/Public Sector

CTN :40904705

14 Jul, 2025 NA

Ranipet - Tamil Nadu

Tender For supply of impeller for siv cooling fan as per drg. no. sr.dee/rs/ed/elect- 194, alt- 2 [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40851650

03 Jul, 2025 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : nctps i se mi circle aoh 25 26 bm dn unit i id fans renewal of id fan 1a and 1b wornout impeller assembly dynamic balancing of shaft with impeller assembly during annual overhaul for the year 2025 26

CTN :40902151

10 Jul, 2025 NA

Kalyani - West Bengal

Tender For supply of 22078s transportation of 1 no spare impeller shaft assembly of dedusting fan, from our kalyani work , 23147c transportation of 4 set complete assembly of 1710 mm dia id fan with motor from our kalyani w

State Government

CTN :40798889

12 Jul, 2025 NA

Parli - Maharashtra

Tender For supply of scanner fan impeller and suction filter at bm-1,250mw, tps, parli-vaijnath.

State Government

CTN :40767819

11 Jul, 2025 NA

Parli - Maharashtra

Tender For work of repair and reconditioning of fd fan impeller hub assembly, at bm-1, 250mw tps parli-v

State Government

CTN :40767823

05 Jul, 2025 NA

Parli - Maharashtra

Tender For work of repair and reconditioning of fd fan impeller hub assembly during aoh at unit-8 bm-2 250mw,tps parli-v..

CTN :40870533

18 Jul, 2025 NA

Uttara Kannada - Karnataka

Tender For supply of hf type fuse, rating- 4a, motor protection relay 415v ac, 50hz, 240v ac,50hz,, ps 3-8rg pipe, 2 x pg13.5 suitable cable dia 5-14mm, blower complete with motor. model vr-50-2-1 - 80 m3- hr,, power contactor coil voltage 120v ac, with inbuilt 1no aux, power contactor/1no-50hz-110v, add on contact 2no-2 nc, power contactor for mnx18 contactor,coil 240v ac,50hz, indicating lamp 120vac-50hz, green colour, led type, indicating lamp 120vac-50hz, green colour, led type, indicating lamp 120vac-50hz, white colour, led type, ammeter range - 0-150a dc, size 72x72, type no. smi-72, voltmeter range 0-250v dc, size 72x72, type no. smi-72, mpr300bb010, 110vac-50hz, relay contacts-1no 1nc-1-2.75a, mpr300bb040, 110vac-50hz, relay contacts-1no 1nc-4-11a, macerator, pump only, cover, suction chamber, rotating knife, macerator compl, nut for flap valve, flange w-connecting pipe dn50, screw,m10x170, fan, fan cover, l-coupling, screw,m8x20, screw,m8x20, screw,m8x35, nut,m5, washer,m6, screw,m6x16, o-ring, sealing ring, o-ring, rubber flap, orifice, shaft seal i 35 mm, ball bearing, ball bearing, flow orifice, indicating lamp red colour lens, 120v, indicating lamp green colour lens, 120v, voltage monitoring relay three phase, ammeter 0-100a, dc suitable external shunt 50mv,size 72 72mm, voltmeter range 0-250v dc, size 72x72, type no. smi-72, solenoid valve 1-4, fd valve w/vpc-v, complete, sheet and cover, comfort, release button, level controller gwt, y-strainer, 1-2, pvc, sched 80 (threaded), valve, 1 swing check, pvc, control relay 5a,relay with 230v ac retaining clip, solenoid valve 1 2-2 way direct acting, pump fresh water (hydrophore pump),, pump centrifugal monoblock pump in moc ss316,size-32 x 32mm, controller, flow, 0.5 gpm, control relay 110vac,50-60hz tesys k2 no 2 nc, overload relay 4.0 6a with spp, lrd-10, gasket, neoprene, for 1-2-150 flange, gasket, neoprene, for 1-150 flange, gasket, neoprene, for 1-1-2-150 flange, gasket, neoprene, for 2-150 flange, gasket, neoprene, for 3-150 flange, gasket, neoprene, for 4-150 flange, valve,solenoid, 1-4, brass, 120v (mounted at control panel), 1 hp motor(tefc) - baldor ip-56, seal kit ( mechanical seal, bushing, and o-ring), 5-8 coupling flange(pump side), axial cutter, radial cutter, impeller washer, cutter ring, 17-4ph, 7-8 coupling flange(motor side), impeller, dechlor replacement tube, santoprene, 2 pk, dechlor replacement tube, santoprene, 5 pk, relay, control, 24 vdc, din, 1pdt, relay, power, 40adc, dpdt, orifice plate, titanium, for 1 t-u ball valve (unsized), rod all thread, 1-2 x 4 brass, bolts, 5-16, 316 ss, washer, flat 3-8 316 ss, book cell assembly, 4-6-8m, complete cell unit, sealant, silicone, handle, chrome plated, pvc true union ball valve socket - 1-2, pvc true union ball valve socket - 3-4, pvc true union ball valve socket - 1, pvc true union ball valve socket - 1 1-2, pvc true union ball valve socket - 2, pvc true union ball valve socket - 3, pvc one piece flange socket - 1-2, pvc one piece flange socket - 3-4, pvc one piece flange socket - 1, pvc one piece flange socket - 1 1-2, pvc one piece flange socket - 2, pvc one piece flange socket - 3, pvc one piece flange socket - 4, pvc check valve - 1 1-2, pvc check valve - 2, pvc tee socket - 3-4, pvc tee socket - 1, pvc tee socket - 1 1-2, pvc tee socket - 2, pvc y strainer - 1-2, pvc cap fipt - 1-2, pvc female adapter socket x esr fjpt - 1-4, pvc female adapter socket x esr fjpt - 1-2, pvc female adapter socket x esr fjpt - 3-4, pvc female adapter socket x esr fjpt - 1, pvc female adapter socket x esr fjpt - 1 1-4, pvc female adapter socket x esr fjpt - 1 1-2, pvc female adapter socket x esr fjpt - 2, pvc male adapter socket x mipt - 1-2, pvc male adapter socket x mipt - 3-4, pvc male adapter socket x mipt - 1, pvc male adapter socket x mipt - 1 1-4, pvc male adapter socket x mipt - 1 1-2, pvc male adapter socket x mipt - 2, pvc 90 deg. elbow socket - 1-2, pvc 90 deg. elbow socket - 3-4, pvc 90 deg. elbow socket - 1, pvc

Air Cooling Fan Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

State Government