Latest air dryer sale Tenders | Government air dryer sale Tenders

CTN :45449253

26 Jun, 2026 NA

Hyderabad - Telangana

Tender For providing of custom bid for services - heat treatment of carbon carbon composites

CTN :45448808

26 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of neutral heat treatment salt nc-660 in 25 kg bag.

CTN :45405307

12 Jun, 2026 NA

Liluah - West Bengal

Tender For corrigendum : supply of ferritic steel sheet 2x1250x2100mm., as per drawing: rdso spec. no. c-k201, grade x2crni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction:stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel)coils. the coil shall be protected in reasonably good condition to with stand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gisheet. iv) side of the coil should be covered with card board sheet. v) after this whole coilshould be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edgeof the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on thecircumference of the eye. ix) whole coil should be mounted on wooden blocks for easylifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. protection procedue: covered in pi [ warranty period: 30 months after the date of delivery ] ]

CTN :45430333

19 Jun, 2026 48.44 Lacs

Avadi - Tamil Nadu

Tender For repairs to the existing damaged employees toilets of heat treatment shop at hvf avadi.

CTN :45438320

25 Jun, 2026 45.00 Lacs

Ranga Reddy-T - Telangana

Tender For supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box

CTN :45392677

23 Jun, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of quenching oil 1.the quenching oil shall confirm to is: 2664-1980 (additive type) 2.the oil shall be suitable for hardening and quenching of medium carbon steel as well as high carbon steel components. 3. the quenching medium shall be capable of producing hardness in the range of 58-62 hrc on components. 4. the oil shall be clean, homogeneous, and free from sludge, suspended matter,foreign particles, dirt and water contamination. 5. the quenching oil shall have low tendency for scaling formation on the surface of components. 6.the oil shall be non-corresive to ferrous metals and shall not produce excessive smoke, fumes, or unpleasant odor during operation. 7.the oil shall provide uniform and crack free hardening with minimum distoration of components during quenching. 8.the flash point of the oil shall be adequately high for safe operation under normal heat treatment shop conditions. 9.the supplied material shall be in original sealed containers properly marked with: name of manufacturer, batch no., date of manufacture, shelf life/expiry date, net quantity, relevant specification details. nil nil spec:is: 2664-1980 (additive type) [ warranty period: 30 months after the date of delivery ] ]

CTN :45179113

15 Jun, 2026 NA

Hyderabad - Telangana

Tender For corrigendum : supply of dual door high temperature heat treatment furnace

Central Government/Public Sector

CTN :45148406

04 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of consumables for heat treatment , de-oxidiser no 6 , silchrome

Central Government/Public Sector

CTN :45246959

05 Jun, 2026 NA

Udupi - Karnataka

Tender For corrigendum : supply of post weld heat treatment., unit charges., mobilization & de-mobilization charges.

Central Government/Public Sector

CTN :45395206

10 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of ss pipe 10 x 1.5 mm in length of 6000 mm conforming to specification din 2391-c, din 17456, grade 1.4301 (x5 cr ni 1810) nbk 3.1b or annealed heat treatment instead of nbk 3.1b.& identification marking as per sme/dev,ltr.no.md46131, dt 3/5/2006 .note: both ends of the tube shouldbe protected with a pvc cap. [ warranty period: 30 months after the date of delivery ] ]

Air Dryer Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector