Tender For purchase of equipments ( s.no 1 to s.no 08 ) for chemistry department - purchase of equipments, digital electronic balance /analytical balance load capacity: minimum 500 g readability: 0.01 g linearity: 0.02g display: lcd/led tare function: required top pan type power supply: 220 240 v ac, 50 hz , digital tds meter measuring range: 0 9990 ppm resolution: 1 ppm display: lcd automatic temperature compensation (atc): required waterproof: minimum ip67 protection power source: battery operated (button cell/aaa battery), digital ph meter benchtop model ph type microprocessor/microcontroller ph range: 0 14 resolution: 0.01 ph accuracy: 0.05 ph or better combined ph electrode with temperature sensor two or three-point calibration facility temperature compensation type automatic display: lcd power supply: 220 240 v ac, 50 hz warranty minimum 1 year, laboratory heating mantle (knitted glass yarn) capacity: 500ml temperature range: ambient to 350 c energy regulator/control knob: required power supply: 220-240 v ac, 50 hz, mortar with pestle material: porcelain size: 100 150 mm inner diameter exterior: glazed grinding surface: unglazed , hot plate top plate material: cast iron plate size: minimum 8 inch diameter power rating: 2000 w temperature range: ambient to 200 c minimum thermostatic temperature control: required power supply: 220 240 v ac, 50 hz, electric bunsen burner electrically operated energy regulator/ control knob operating temperature 800 c body: stainless steel power supply source: corded electric, supplied with a heavy-duty, heat-resistant, earth-grounded, 3-pin power cord (minimum length 1.2 meters). power consumption: between 350 and 500w power supply: 220-240 v ac, 50 hz , water distillation unit output capacity: 4 litres per hour (lph) ph value: 5.5 to 7.0 conductivity (raw water distillation):3.0 4.0 s/cm or less glassware material: borosilicate 3.3 glass (pyrex/duran equivalent) heating elements: silicaenclosed quartz heaters or chromium-plated element variants power supply: 220 240 v ac, 50 hz / 60 hz, single phase automatic water level cut-off
Tender For supply of spring kit for airflowmeasuringvalve as per rdso drg.no. skdp 2705 consisting :- sr.no.1, item- spring pt. no. a87822/329, ref.no. 4, qty/kit-1, sr.no.2, i tem- spring pt. no. a87822/159, ref. no. 5, qty/kit-1, sr.no.3, item-spring pt. no. 87821/88, ref. no. 12,qty/kit-1, sr.no.4, item- spring pt. no. a87822/325,ref.no.14,qty/kit-1. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of airflowmeasuringvalve,clw 's c& d no. f-315/498 & pipe mounted version with part no.c76574/002,specn.no.- mp-1412/88 and drg.no.- db 1035373 with latest [ warranty period: 30 months after the date of delivery ] ]
Tender For auction sale of depot non ferrous scrap - 98210142 scrap iron, brass, copper and aluminium mix released valves consisting of throttle valves,1 inch sl angle cock, hom, pulley, air drier consisting f1 selector valves, a9/sa9 valves, mu2b valves, r6 relay valve, pressure gauge indicator, airflowmeasuringvalve, pressure gauge of broken condition nh valve, mom, c2 relay valve, c3w valves, sand injectors, feed valves, duplex check valves, d1 emergency valves and auto drain valves, safety valves, large & small pipe connections, of different types & sizes, wiper motors and wiper switches etc. of sort and sizes parts released from loco, old used and unserviceable for rly use (mode of delivery by actual weight). (approximate weight per kg. ms= 63.36 %, brass= 08.54 %, al=26.0 %, cu- 02.1 %) note-indicative approximate composition only for reference not to claim)
Tender For supply of airflowmeasuringvalve as per specification no. mp1412/88 and drg.no.sk-dp-2705 [ warranty period: 30 months after the date of delivery ]