Latest air gauge Tenders | Government air gauge Tenders

Central Government / Public Sector

CTN :45737462

04 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of set of spares for ckd make prv items suitable for aal make vcb 1. ckd prv with gauge , input & output bolts with washers, to suit aal vcb, ckd make asper part no. w-2000-10-w-m1. 2. ss input pipe with base plate for ckd prv suitable for aal vcb to m/s solutions automation part no: stap-3/8. 3. air gauge with metal adaptor, used at air tank in panel as per part no: g49d-6-10 p. make: ckd only. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :44560290

01 Jul, 2026 NA

Goa - Goa

Tender For bid to ras supply of dew point meter (portable type) , dry film coating thickness (dft) gauge , wet film coating thickness (wft) gauge

Central Government And Public Sector

CTN :45709559

15 Jul, 2026 NA

Multi City - Multi State

Tender For air receiver tank of capacity 4 meter cube (4000 liters) as per following technical specifications.size of the shell: -diameter =1260 mm. height of the shell=3150 mm. 1. service: compressed air 2. capacity: 4000 liters 3. orientation: vertical 4. working pressure: 7.0 kg / cm2g 5. operating pressure: 6.0 kg / cm2g 6. hydro test pressure: 10.5kg/ cm2g 7. working temperature: ambient 8. design temperature: ambient 9. vessel dimension: a) diameter: 1260 mm, b) shell length: 3150 mm 10. thickness: a) shell: 10mm, b) dish: 10mm 11. fabrication code: is-2825/asmesecviiidiv1 12.materialofconstruction:is2062oraspertherequirement. 13 .valve: 150mm ball valve- 2 qty (with each air receiver). valve make- valvora/norflow /l&t /normex. 14. surface coating: internal: anticorrosion coating, external: one coat red oxide primer and 2 coats of enamel paint. 15. accessories included: suitable safety valves and pressure gauge. note: (1) air receiver shall be hydraulically tested as per is-2825/asmesecviiidiv-1, and test certificate shall accompany the supply. (2) necessary material test & guarantee certificates shall be submitted. (3) warranty: 24 months from the date of commissioning. (4) proper name plate indicating capacity, serial number, mfg date, max working pressure, test pressure, make etc. shall be provided on the tank. (5)inspection agency: tpi agency at firms works before dispatch. [ warranty period: 24 months after the date of delivery ] ]

CTN :45697894

06 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of cabin lifting pump assy , cabin ram assy , fuel motor , wiper motor , 4 way valve , contractor box , seat shocker , closing cock , tell light , side mirror , reverse light , dozer socket , head light , indicator light assy , fog light , equaliser , cabin fan , cabin light , map riding light , convoy light , pneumatic valve , fuel filter assy , km gauge , rpm gauge , air gauge , oil gauge , clutch cyl fluid container fitted , upper head light , air dryer

CTN :45678714

11 Jul, 2026 5.50 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of wooden hand wire brush 3 inch x 6 inch , teflontape 3or4inch x 10mtr , rustolene pidilite make 500ml , holdite 500 gm pack pidilite make , grinding wheel ag 4 inch carborandum universal make , grinding wheel ag 7 inch carborandum universal make , brasso liqued in tin of 100 ml , araldite in 1.80 kg , emery cloth in 500 sheet fine carborandum universal make , emery cloth in 500 sheet rough carborandum universal make , emery tape 50 mtr roll size 2 inch fine carborandum universal make , emery tape 50 mtr roll size 2 inch roughcarborandum universal make , cotton waste , m seal 1 kg pack astralorpidiliteor m m make , blue tube 15ml atlas orcamel make , piano wire , graphite powder fine , hacksaw blade double side 1or2inch x 12 inch hss miranda make , hacksaw blade double side 1or2inch x 12 inch low carbon steel , marken cloth cotton , conical grinding wheel 1inch x 2inch , grinding wheel 1.5 inch , buffing wheel 4inch for ag 4 grinder boschor dewalt make , cutting wheel 4inch for ag 4 grinder boschor dewalt make , cutting wheel 14inch boschor dewalt make , silicon brazing rod size 3mm , klinger make b-9 borocilicate gauge glass imported and plane , stainless steel plate grade 304 plain sheet size 4 feet x 8 feet x 3 mm thickness , anabond 112 thread locker 50 ml , loctite 609 retaining compound in 50ml , loctite 641 retaining compound in 50 ml , emery paste rough 400 gm carborandum universal make , emery paste fine 400 gmcarborandum universal make , brass solid round bar extruded quality size 20mm od , brass solid round bar extruded quality size 25mm od , brass solid round bar extruded quality size 50mm od , boiler gauge glass bishop make size 3or4inch x 16.5 inch , boiler gauge glass bishop make size 3or4inch x 22.5 inch , solenoid valve with coil rotex make model no 3012 two way , solenoid valve with coil rotex make model no 3013 one way , stag jointing paste type b red in 1 kg pack , galva coating gcs 73 bright finish make aerotech 500 ml , grinding wheel black for bench grinding machine size 1.5inch x1.5 xinch x12inch , grinding wheel green for bench grinding machine size 1.5inch x1.5 xinch x12inch , usha martin make steel wire rope 3or4inch,6or36 construction hemp core with test certificate 305mtr in one roll , love joy coupling set l-70 , love joy coupling set l-75 , love joy coupling set l-90 , love joy coupling set l-100 , love joy coupling set l-110 , spring washer bbbb make size 3or8 inch 100 piece per pack , spring washer bbbb make size 1or2 inch 100 piece per pack , spring washer bbbb make size 5or8 inch 100 piece per pack , spring washer bbbb make size 18mm 100 piece per pack , split pin champion make size 1or4 inch x 2 inch 100 piece per pack , split pin champion make size 1or4 inch x 2.5 inch 100 piece per pack , split pin champion make size 1or4 inch x 3 inch 100 piece per pack , anabond 666-250ml , leather hand gloves pair ador or asha make , rubber star for coupling set l-70 , rubber star for coupling set l-90 , rubber star for coupling set l-100 , rubber star for coupling set l-110 , paint brush size 2inch , paint brush size 3inch , paint brush size 4 inch , red oxide primer british paint-asian make 20ltr drum , borex powder suhaga , graphite fire crucible 120 kg ,make india super -double kabootar , ss flat grade -305 size -12mm x 65mm , silver rustam brazing flux 500gm , sleeve 3or4 inch nationalorleader make for tubular gauge glass , rubber cone 3or4 inch nationalorleader make for tubular gauge glass , flexible hand grinder for 2 inch wheel sf-2 model alond with shaft raly wolf 10fd accessories , wire rope u clamp heavy duty size 3or4inch , monarch save past tpxt-high temp titanium putty ,working temp 500centi complete kit , needle roller bearing axk4060 with sleeve , needle roller bearing axk7095 with sleeve , needle bearing ba1816 with sleeve , rubber oil seal 65x85x10 spring loaded oskoorsunnyormykoda make , rubber oil seal 42x55x8 spring loaded oskoorsunnyormykoda make , rubber oil seal 42x72x10

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

CTN :45666967

04 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab equipments - equipments for lab, direct shear machine:standard compliance:the equipment shall conform to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size:60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assemblyproving ring with calibration charttwo dial gaugesloading weights and hangerporous stones (2 nos.)specimen cuttertool kit, auger boring (or) any boring -soil sampling apparatus: engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), flow table test apparatus: dimensions and specifications as per is 9103, table top made from flat metal plate ,minimum thickness 1.5 mm, table top size:700 mm*700 mm ,with flatness tolerance of 1.5 mm.table top marked with: scribed cross at centre,lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top:16+_ 1kg table top base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface. minimizing bounce stop watch-digital -2 nos scale 1 mtr-2 nos mounting wooden platform 300 mm height amc for 3 years inclusive., drying oven:temperature range: ambient (room) up to 250 temperature control: digital pid controller / thermostat for accurate heating. prestogroupaccuracy: typically 1 2 c. chamber material: stainless steel inner chamber for durability and easy cleaning. air circulation: forced convection fan for uniform temperature. shelves: usually 2 3 adjustable shelves. power supply: single phase 220 230 v ac, 50 hz.

CTN :45586220

01 Jul, 2026 NA

Murshidabad - West Bengal

Tender For corrigendum : supply of measuring instrument for inspection and quality checking of materials of different major rli scheme berhampore-i (a-m) division - tubular vernier inside micrometre extension rod type 50-1000mm range, 8 pc extension rod least count 0.01mm ( mitutoyo brand), s.s pi tape 28 mm to 300mm, least count 0.02mm ( pi tape brand), s.s pi tape 300mm to 600mm least count 0.02mm ( pi tape brand), outside micrometre, range 0-25mm least count 0.01 (mitutoyo brand ), vernial caliper 0-200mm least count least count 0.02mm (mitutoyo brand), coating thickness gauge meter (electrocoat brand), oscilloscope for solar vfd ( hand held type) suitable for 415 volts (sky king brand), auto level with heavy duty aluminium double lock tripod stand and 6m levelling staff (sokia brand), laser type digital techometer (generecbrand), digital power clamp meter (sigma brand), meger digital type 1000 volt insulation tester (sky king brand)

Central Government/Public Sector

CTN :45658744

03 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of coating thickness gauge (q3)

CTN :45638959

13 Jul, 2026 NA

Jamalpur - Bihar

Tender For supply of digital coating thickness gauge ferrous(dft meter) 0-2000 microns with cal. certificate foil set.technical specification:- 1. instrument type: f-ferrous, c-conductive, f&c combined, 2. range:-0-(1999,3000,6000,12000) ,microns. 3. resolution(microns):-0<20, 1>20, 4. accuracy:-1.5% or 2 microns whicheveris more, 5. min. base thickness:-0.3mm 6. min. measuring area:-6mm, 7. working temperature:-0-50 degree c, 8. instrument size: -135x70x24mm battery:-9v 6lf22 alkaline battery, (duracell/gp etc.) make - eray, precision, elpidan. [ warranty period: 30 months after the date of delivery ] ]

Air Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government/Public Sector