Latest air governor Tenders | Government air governor Tenders

CTN :45318831

09 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of living shelter ojl 2467 - supply and construction of hybrid pre-engineered ojls building offr jcos living shelter , water storage tank triple layer 1000 ltrs , fabrication from structural steel section for staging of water storage tank made of capacity 500 oblique 1000 ltrs made out of ms angle iron frame , wc european type model 2008 ewc and combi flush pvc flushing cistern of 10 ltr capacity , looking mirror of selected quality frameless of size 600x450x5mm , chromium plated toilet paper holder with flap , brass chromium plated towel rail 600 mm long 20 mm dia with cloth hooks min 04 nos , chromium plated piller cock swan neck with aerator and butter fly handle weight not less then 450 gm , stop cock angular type chromium plated brass 15 mm weight not less then 330 gm , stop cock t type chromium plated brass 15 mm weight not less then 330 gm , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm weight not less then 330 gm , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , corner sheet glass shelf with two shelf assembly consisting of 5 point 5mm thick sheet glass shelf with cromium plated brass bracket guard and railing , soap dish ss flat back complete with screw , 2000 ltrs anaerobic frp oblique lldpe septic tank , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr elbow 90 degree 32 mm , ppr elbow 20 mm , ppr female thread elbow 90 degree 20 mm dia , ppr female thread t 20 mm dia , ppr plain t 32 mm , ppr reducer t , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 20 mm , gate valve 32 mm , m seal 150 gm pkt , taflon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick , cp grating 100 mm dia , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , pvc air pipe 32 mm dia , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass cp jet water spray for ewc , plastic dustbin of capacity 40 ltrs , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1 point 5 sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2 point 5 sqmm single core , pvc casing capping of size 1 inch medium grade snow white , pvc casing capping of size 3 oblique 4 inch medium grade , switch piano 5 amp 230 volts flush type one way , led tube light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug 1 1 oblique 2 inch size , pvc switch board snow white size 6 inch x 6 inch for sockets , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches oblique db , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 , switch socket combination snow white multipurpose 2 in 1 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing me

CTN :45175967

11 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of piston , circlip piston , piston pin , piston rind std , cylinder linner std , main bearing 010 , big end bearing 010 , cam bush std , sleeve o ring , thrust washer std bm , cr bush std , valve inlet and exhaust , valve guide , valve seat ring intake , valve seat ring exhaust , valve stem seal , oil seal crank shaft front and rear , oil jet with packing , engine gaskit set overhauling complete with gaskit and tappet cover packing , oil filter element , oil pump assy , belt alternator , timing chain assy , clutch disc assy , chain guide set primary and secondary , chain tensioner assy , guide tensioner type assy , oil strainer , thermostate valve , crank sensor , fuel return pipe injector , fly wheel assy , clutch cover assy , bearing clutch release , pilot bearing , fuel filter head assy , fuel filter assy with sep , element primary air , safety element , water pump assy , fuel filter assy , oil pressure switch , temp sensor , egr valve , valve tappet guide , push rod , radiator assy , cooling fan with thermo clutch , vaccume modulator , fip , injector , brake acctuator rear , turbo charger assy , oil return pipe rubber hose , hose pipe set , solenoide switch self 12v , copper brush gear plate self , copper brush set , gun metal bush set , voltage regulater , rail pressure sensor , water in fuel sensor , tensioner roller , engine mounting lh , engine mounting rh , wipper blade , brake dual valve , steering rod with cross , acc pedal , front axle bearing , front axle oil seal , crown wheel front axle , pinion front axle , side view mirror lh rh , concentric slave cylinder , shock absorber assy front , shock absorber rear , rear brake shoe , hand brake cable frt , hand brake cable rear , shocker gas stud hood , propeller shaft 4x4 , fuel injection pump , uj cross , ignition switch , wiper blade front , wiper blade rear , fan belt 4pk 1171 , fan belt 4pk 1115 , wheel cylinder frt rr , suspention bush kit comp front , suspention bush kit comp rear , vaccum moduler , clutch master cylinder , brake master cylinder , fuel filter , ac filter , oil filter , air filter , disc pad front , pipe overflow injector with lock , head gaskit , ball joint upper lower , tail light assy lh rh , reverse light switch , supporting stud intercooler , bleeder clutch slave cylinder , drain plug , vaccume booster , head lamp bulb h7 h1 , self stater assy , self copper brush , self solonoid switch , self bendix pinion , alternator regulator , carbon brush set , wheel stud with nut , hub front comp lh rh 4x4 , wheel bearing front , axle boot kit rubber , water hose plastic with o ring , fog light assy , axle seal front lh rh , fan belt , rear view mirror lh and rh , rear brake shoe set , head light bulb h7 , fuel pump , wiper blade //bid details 2 / 108

Central Government/Public Sector

CTN :45458971

15 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of pway scrap - steel scrap other than rail (m.s. scrap) slide chair, stretcher bar, gauge tie plate, fish plate, glued joint plate etc

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

State Government

CTN :45433533

25 Jun, 2026 9.23 Lacs

Jaipur - Rajasthan

Tender For supply of tube clamp , rail , support , front plate unpainted , union nut , union , valve cap 184697 , valve cap 184838 , valve cap 191569 , ring , support a , valve house , sy house , block , arm , plate cp a z , coil , valve body , chassis cp with bush , screen cp unpainted , bracket , stand , distance piece , screw , console , joint , stub , spring house , stud , cannula 4x3 18x20 , filter unit cp

Central Government/Public Sector

CTN :45417504

24 Jun, 2026 NA

East Singhbhum - Jharkhand

Tender For rate contract for spares for normet make - rate contract for spares for normet make, spacer flange part no 4570149, bushing part no 5051925, meter set complete part no 5124748, shelter plate part no 5613380, seal part no 5700467, magnetic plug part no 5728380, brake cam part no 5728992, hose assembly part no 6045630, hose assembly part no 6045640, hose assembly part no 6045660, hose assembly part no 6045690, hose assembly part no 6046860, pr. releif valve part no 10000283, inner scissor part no 15078270, base frame part no 15243570, side guide part no 15243580, jack part no 15246970, external scissor part no 15270317, meter kit part no 15876220, platform frame part no 16098380, widener part no 16098800, widener part no 16098810, flange part no 25131541, distributor block part no 31715063, guide part no 33091208, cylinder tube part no 33300971, exhaust purifier part no 35058429, axle part no 35071729, axle part no 35071737, axle part no 35071745, bearing housing part no 35071786, pin part no 35071869, stripe tape part no 35120427, bushing part no 35340280, lifting lug part no 35552010, pin part no 35562600, armour part no 35662630, gear shifter part no 35843460, gear shifter part no 35843750, frame joint part no 35994500, shelter plate part no 35995460, rubber mat part no 36059100, air cleaner part no 36094350, elbow part no 36094390, framing plate part no 36192420, framing plate part no 36192450, damper rubber part no 40590200, coupling part no 41211343, work light cover part no 41483223, framing part no 41483231, grid iron part no 41483272, roller part no 41555608, hose support part no 41575242, banjo bolt part no 41662552, hinge plate part no 41753526, pin part no 41753807, coupling part no 41777046, axle part no 41820416, spacer ring part no 41821380, fastener part no 41887951, hose support part no 41889601, rail pipe part no 41906702, hinge part no 41950437, seat (opt) part no 41952250, support part no 41954504, fastening screw part no 41956731, junction part no 41959875, piston part no 42842799, piston rod part no 43300946, charge valve assy. part no 45042200, extension pipe part no 45051570, flange part no 45071800, bearing housing part no 45071818, sliding part part no 45071842, pin part no 45071859, sliding part part no 45072170, bearing housing part no 45073608, flexible pipe part no 45100997, exhaust pipe part no 45137668, hinge part no 45155652, bearing plate part no 45170131, flange part no 45170149, tightening part no 45177177, groove sleeve part no 45178118, fastening plate part no 45249790, spacer ring part no 45271930, brake linkage part no 45319800, reduction fitting part no 45331540, rod part no 45363670, reduction fitting part no 45366250, extension shaft part no 45367100, adapter flange part no 45367110, junction part no 45431190, extension pipe part no 45435200, lug part no 45437070, pressure plate part no 45482150, plain bearing part no 45482190, coupling part no 45491400, pin part no 45497970, bolt part no 45497990, shelter plate part no 45498000, reduction fitting part no 45499330, intermediate flange part no 45513430, pin part no 45554240, pipe handle part no 45555480, fitting part no 45566220, seal part no 45567360, cover plate part no 45572480, support part no 45615110, shelter plate part no 45663500, stand part no 45668930, valve assy part no 45673610, brake valve part no 45675730, shuttle valve part no 45677350, fastener part no 45709100, mounting plate part no 45709110, fastening plate part no 45711200, propeller shaft cover part no 45716750, stand part no 45718710, fastener part no 45789870, handle part no 45813130, u-bracket part no 45844690, hydraulic throttle pedal part no 45882450, brake valve part no 45886440, magnetic valve fittings part no 45887140, ls-signal valve fittings part no 45888370, drivers panel part no 45924870, hinge part no 45933130, top holder part no 45952340, graphite seal part no 45970700, junction part no 45980780, pressure relief valve part no 45981870, pressure relief v

CTN :45454844

21 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of kit for pantograph throttle valve to rdso's str no.-rdso/2008/el/str/0049 (rev.-2) forpantograph type ir 01 comprising of 4 items 4 nos. /set to m/s gsec's drg. nos. as follows duly approved by rdso similar to --- (1) ring type r no. 7 drg no. gsec/panto/042 = 1 no. (2) joint for valve drg no. gsec/panto/100 = 1 no.(3) piston ring drg no. gsec/panto/063 = 1 no. (4) joint drg no. gsec/panto/111 = 1 no.(total qty.= 4 nos./set) or for pantograph type pan 01 comprising of 4 items 4 nos./set to m/s concept rail engineen's drg. nos. as follows-- (1) ring type r no.- 7 drg. no. 0103172 = 1no. (2) joint for valve drg no.- 0103174 = 1 no. (3) piston ring drg no. 0103178 = 1 no. (4) joint drg no. - 0103180 = 1 no.(total qty.= 4 nos./set). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45429756

16 Jun, 2026 NA

Multi City - Jharkhand

Tender For auction sale of pway scrap - check rail 90r off short ,glued joint 60kg off size , etc.

Central Government/Public Sector

CTN :45431073

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - (1) 60 kg ch/r 01 nos 0.241mts (2) 60 kg g/j 21 nos 9.38 mts (3) 60 kg b/m sej t/rail 02 nos 0.82mts (4) 60kg special repair 18 nos 14.112mts (5) 60kg t/r 12.35 m 12 nos 7.104 mts (6) 60ke t/r 11.90 m 04 nos 2.20 mts (7) 52 kg t/r 11.90 04 nos 1.9 mts (8) 52 kg special repair 7 nos 4.718 mts (9) 52 kg g/j 2 nos 0.784 mts (10) 52 ke sej t/r 02 nos 0.6 mts (11) 52 kg sej special repair 02 nos 0.64 mts (12) 90 lbs special repair 03 nos 1.338 mts (13) 60 kg f/cut ch/r 6.68 repair and maintenance 0.367 mts total lot qty- 44.215 mts approx sse lot no bpl/pw/n/sc.p & xing rails/2025-26/06/02 1. buyer should visit the site before bidding. 2.mode of delivery given by actual weight. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5.material other than description not to be delivered.

Central Government/Public Sector

CTN :45431074

10 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For auction sale of pway scrap - scrap point and crossing 1. 60 kg g/j with plate 6 nos 2.739 mts 2. 52 kg g/j with plate 11 nos 4.534 mts 3. 52 kg t/o c/r 11 nos 2.216 mts 4. 60 kg t/o t/r 8 nos 2.896 mts 5. 52 kg guard rail 4 no 0.993 mts 6. 90 lbs guard rail 77 nos 9.611 mts 7. 52 kg sej t/r - 2 nos 0.617 mts 8. 52 kg l/c c/r- 7 nos 2.503 mts 9. 60 kg t/o c/r -3 nos 0.723 mts 1060 kg t/o special repair - 2 nos 1.577 mts 11. 52 kg t/o t/r 1 no 0.505 mts 12. 52 kg sej special repair 2 nos 0.617 mts 13. 69 lbs rail 18 nos 2.659 mts total 152 nos and 32.190 mts sse lot no bpl/s/bina/pw/scrap point and crossing 2025-26 12 tms lot no. bpl/s/bina/pw scrap point and crossing 2025 26 12 note: 1. buyer should visit the site before bidding. 2.mode of delivery by actual weight. 3.it is strictly advice to the bidder to see the lot and loading point personally before bidding the lot in e-auction. no claim will be entertained after sale of the lot. 4. after joint lot inspection, if any addition, deletion, alteration & variation comes in the lot, stock holder will be fully responsible. 5. material other than description not to be delivered.

Air Governor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector