Latest air heater tube repair Tenders | Government air heater tube repair Tenders

Central Government And Public Sector

CTN :40098701

14 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For corrigendum : supply of spares for stack loss monitoring system - item no.1 2 channel i o board, auto gain , item no.2 lcd interface board assembly , item no.3 power supply board assembly , item no.4 motherboard assembly , item no.5 processor board assembly , item no.6 laser module for hdo analyser , item no.7 beam splitter for hdo , item no.8 fiber bulkhead connector , item no.9 bnc panel mounted bulkhead adapter for coax connection , item no.10 solid state relay for heating tape , item no.11 heated tape for hdo gas cell , item no.12 thermocouple-j- type , item no.13 fiber optic jumper cable , item no.14 coaxial cable with sma and bnc terminations , item no.15 detector, sma mounted with isolator , item no.16 window for hdo measurements , item no.17 o- ring for window and window holder , item no.18 mirror for gas cell , item no.19 pump uiipl-vp , item no.20 pressure controller , item no.21 flow controller , item no.22 solenoid valves , item no.23 temperature controller , item no.24 relay module , item no.25 analog output module , item no.26 hmi uiipl-hmi , item no.27 power supply uiipl-ps

CTN :40218965

13 May, 2025 52.49 Lacs

Multi City - Karnataka

Tender For procurement of lab equipments for quality control lab of no 1 qc subdivision kibbanahalli - supply, instalation, testing and comissioning speedy moisture meter, as per is2720 (part 2), is12175 range 0-25% (gauge div.0.5percent) with digital weighing balance. item code aim-036-1 with all lead and lift complete as per specification and directions of the engineer-in-charge of work., suply, instalation, testing and comissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c item code aim-9109 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comisioning specific gravity bottle-100ml item code aim-401-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml item code aim-401 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, instalation, testing and comissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, item code aim-054-1 with all lead and lift complete as per specification and direction of the engineer-in-charge of work., suply, installation, testing and comissioning sieves as per is 2720 (part 4) sieve bras frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning 20cm dia bras frame sieves with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning lechatelier flask - used for the determination of specific gravity of hydraulic cements as specified in is4031-ii, aim-401 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, installation, testing and comissioning digital thermometer range-50 to 280 deg c , aim-9622 with all lead and lift complete as per directions of the engineer-in-charge of work., suply, instalation, testing and comissioning specific gravity bottle-50ml with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., suply, instalation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., suply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, aim-414 with all lead and lift complete as per direction of the engineer-in-charge of work., spply, instalation, testing and comisioning vicat apparatus with isi certification mark is5513 fitted in aluminium box. item code aim-394 with all lead and lift complete as per specifiations and directions of the engineer-in-charge of work., suply, installation, testing and commisioning le-chatelier mould, with isi certification mark is 5514, each (resistance of mould test apparatus). supplied complete with over weight 300g +/- 1 g item code aim-400 with all lead and lift complete as per direction of the engineer-in-charge of work., suply, instalation, testing and commisioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per direction of the engineer-in-charge of work., suply of heating glove with all lead and lift complete as per direction of the engineer-in-charge of work., suply, installation, testing and comissioning swell test apparatus as per is2720 (part 16

CTN :40218973

13 May, 2025 34.46 Lacs

Channarayapatna - Karnataka

Tender For procurement of lab equipments for quality control lab of no.1 hrbhlc subdivision q.c channarayapatna - supply, installation, testing and commissioning specific gravity bottle-100ml conforming to is2386 mis-401-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 3.35mm , item code aim-05304 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 10mm , item code aim-05337 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning environmental test chamber eco friendly with cooling temperature range-10c to 60c +-1c, humidity-50% to 95% + -4%, double walled, inner chamber ss 304, digital controller cum indicator, size - 610x610x610mm, item code aim-9878 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, specimen size 100mm & 150mm cube, 100mm dia x 150mm dia cylinder, one electric motor, single phase 220v, 50hz, ac supply digital display, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning vibration machine, with built-in digital timer, nabl calibrated - as per is4031, machine is supplied with one cube mould with isi certification mark and poking rod. suitable for operation on 220v, 50hz, single phase, ac supply. item code aim-418-2 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning sieves as per is 2720 (part 4) sieve brass frame 20cm dia x 90 microns, item code aim-05325 with all lead and lift complete as per directions of the engineer-in-charge of work. , supply, installation, testing and commissioning heating gloves item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and universal automatic compactor aim-11001-ms ,compaction mould 100mm id, 127.3mm height 1000ml volume,complete with collar and base plate, made of mild steel and aim-11101-ms - compaction mould 150mm id, 127.3mm height 2250ml volume, rammer - circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight, drop - adjustable to 310mm or 450mm.with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation,testing and commissioning digital laboratory california bearing ratio test apparatus , as per is2720 (part xvi). suitable for operation on 220v, 50hz, single phase, ac supply,digital indicator. no of channels - 2 nos, load cell , capacity - 50 kn compression type, maximum overload -110% of the rated capacity, item code aim-121-4-ms with all lead and lift complete as per directions of the engineer-in-charge of work, supply, installation, testing and commissioning core cutter - ref. standard is2720 (part 29) , core cutterof known volume is driven into the soil by a rammer. the core cutter is dug out, trimmed and the soil inside weighed and dried for moisture and density check. replaceable parts steel dolly, 25mm high and 100mm dia item code aim-161 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter - ref. standard is 2720 (part 29) , core cutter of known volume is driven into the soil by a rammer. cylindrical core cutter, made of steel 100mm dia x 130mm long, steel dolly, 25mm high and 100mm dia rammer with steel rod item code aim-161 with al

CTN :40218946

13 May, 2025 58.87 Lacs

Tumkur - Karnataka

Tender For procurement of lab equipments for quality control lab of no.29, q.c subdivision tumkur - supply, installation, testing and commissioning laboratory electric oven with digital indicator cum controller with safety alarm, range 50deg to 250 deg c +/-1 deg c with air circulating fan, s.s. inside size 600 x 900 x 450mm item code aim-9109 with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning of sieve shaker, motorised, with built-in digital timer and 20cm and 30cm dia adaptor suitable for operation on 220v, 50hz, single phase, ac supply with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply of mould, steel, for 70.6mm cube-for preparation of mortar and lime cubes, item code aim-414 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning core cutter machine with all accesories including generator with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning digital compression testing machine, capacity 1000kn, range 1000kn, least count 0.1kn, max.clearance between platens 390mm, max.distance between side plates 260mm, platen size 222.0 dia, piston dia 157mm, piston stroke 50mm, item code aim-314e-dg-1 with all lead and lift complete as per directions of the engineer-in-charge of work., supply of sieve brass frame 20cm dia x 90 microns with all lead and lift complete as per directions of the engineer-in-charge of work., supply of heating gloves with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning swell test apparatus as per is2720 (part 16).capacity 5kn, aim-11001-mould 100mm dia x 1276.3mm height (1000ml volume) with base plate and collar, aim-265 - proving ring, 2.5kn capacity, aim-072 dial gauge 25mm travel, 0.01mm least count, aim-13201, item code aim-132 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning centrifuge extractor, capacity 1500g electrically operated. the new design of centrifuge extractor is compact with inbuilt dimmerstat for speed veration from 0 rpm to 3600 rpm. suitable for operation on 220 v, 50 hz, single phase, ac supply. each unit is supplied complete with a set of 25 filter paper discs with all lead and lift complete as per specifications and directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 16c range 90c to +370c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer ip 15c range 5c to +110c with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ball valve 4mm item code aim-53302 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning cup 4mm item code aim-53301 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 61c item code aim-56111 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning thermometer, ip 60c item code aim-56110 with all lead and lift complete as per directions of the engineer-in-charge of work., supply, installation, testing and commissioning ring and ball apparatus. the ring and ball apparatus is a compact user friendly apparatus. it has magnetic stirrer with heating facility and digital display of temperature, the heating can be adjusted through knob in aim 561-1 and can be controlled through the integral pid controlled in aim 561-2. suitable for ope

CTN :39774511

08 May, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of aiir condiitiioniing system - supply charges for mr item no 1.001 , supplycharges for mr item no 1.002 , supply charges formr item no 1.004 , supply charges for mr item no1.005 , site work charges as per mr sl no 02.001 foritem no 1.001 , site work charges as per mr sl no02.002 for item no 1.002 , site work charges as permr sl no 02.004 for item no 1.004 , site workcharges as per mr sl no 02.005 for item no 1.005 , freight charges as per mr sl no 03 , total lumpsumpwcamc charges for 5 years as per mr sl no 12.001for item no 01.001 , total lumpsum pwcamc chargesfor 5 years as per mr sl no 12.002 for item no 01.002, total lumpsum pwcamc charges for 5 years as permr sl no 12.004 for item no 01.004 , total lumpsumpwcamc charges for 5 years as per mr sl no 12.005for item no 01.005 air conditioning system, vrf system, hvac, heatingventilation air conditioning, heating ventilationand air conditioning system, vrf unit, vrf system

Central Government And Public Sector

CTN :40199586

14 May, 2025 NA

Dibrugarh - Assam

Tender For supply of set of item no. 1&2 for modification works as per rdso specn.no.rdso/pe/ms/ac/0089-200 2 rev.0 and hq lr.no.el/268/24/modification /2059 dated 28.10.2024. item no.1 : differential pressure swi tches (dps) of pressure range from 0.08 -1.20 (inches wc) shall be provided with more than 10,00,000 ope rations with automatic reset with ip-54 protection as per iec-60529 with ul-94 v0 -qty 01 no. per set. item no.2: suitable length ss 304 tube with id 4.0mm and 6.6 of od and length : 1.173 mtrs to connect the diff erential pressure switch to heating element -qty 01 no.per set. make brand: beck or similar. [ warrant y period: 30 months after the date of delivery ]

Air Heater Tube Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector