Get complete information related to latest Air Heater Tube Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Air Heater Tube Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Air Heater Tube Tenders.
Tender For provide electrical material at grampanchayat jambhiwali tal khalapur dist raigad - sensor, surya straith light 50w, surya straith light 72w, panasonic straith light 50w, panasonic straith light 72w, flood light 50w, led bulb 9w, led bulb 12w, led bulb 18w, led bulb 23w, led bulb 30w, submarcial wire 2.5mm * 3core, fle wire 2.5mm * 3core, 6amp switch, 6amp socket, 16amp switch, 16amp socket, surya flood light 100w, 3 pin top 16amp, 3 pin top 6amp, service wire aluminium 6 core, service wire aluminium 8 core, service wire aluminium 12 core, service cable 3 phase coper, service cable 4 phase coper, holder for simple bulb, tape bundle, tripple 18 ampier, tripple 32 ampier, starter for 3 hp pump (lnt crompton), starter for 5 hp pump (lnt crompton), starter for 15 hp pump (lnt crompton), street lite set led 50 wat with all fitting, pipe for cement poll with clamp, nut bolt, pipe, pipe for iron poll with clamp, nut bolt, pipe, capacitor for fan, main switch icdp, simple bulb 60 vat philips, street lite set led, 50 wat with all fitting (micronic co.), street lite set led, 70 wat with all fitting (micronic co.), street lite set led, 100 wat with all fitting (micronic co.), street lite set led, 50 wat with all fitting (syska co.), street lite set led, 70 wat with all fitting (syska co.), street lite set led, 100 wat with all fitting (syska co.), street lite set led, 50 wat with all fitting (philips), street lite set led, 70 wat with all fitting (philips), street lite set led, 100 wat with all fitting (philips), solar led streetlight 50 wat with all fitting (syska co.), solar led streetlight 70 wat with all fitting (syska co.), solar led streetlight 100 wat with all fitting (syska co.), solar led streetlight 50 wat with all fitting (philips co.), solar led streetlight 70 wat with all fitting (philips co.), solar led streetlight 100 wat with all fitting (philips co.), four phase cable wire, one phase fitting wire, electric celling fan (cromton), electric celling fan (havells), led bulb syska 24wt, led bulb syska 18wt, control panal 32 amp, control panal 63 amp, cfl bulb 75 vat (ajenta), cfl bulb 75 vat (crompton), screw, electric tube 4 ft fixtures with all fitting, electric cut out, inverter luminous 1500 va (with all fitting including exide battery), inverter luminous 2000 va (with all fitting including exide battery), inverter luminous 2500 va (with all fitting including exide battery), mccb (lt) 10amp, mccb (lt) 16amp, mccb (lt) 28amp, mccb (lt) 32amp, leg 16, leg 18, leg 32, led booster (50 vat) (micronic co.), led booster (70 vat) (micronic co.), led booster (50 vat) (syska co.), led booster (70 vat) (syska co.), led booster (50 vat) (philips co.), led booster (70 vat) (philips co.), led stips (50 vat) (micronic co.), led stips (70 vat) (micronic co.), led stips (50 vat) (syska co.), led stips (70 vat) (syska co.), led stips (50 vat) (philips co.), led stips (70 vat) (philips co.), air conditioner (a.c) 1 ton carrier (with including all taxes & service charges), air conditioner (a.c) 1 ton blue star (with including all taxes & service charges), air conditioner (a.c) 1.5 ton blue star (with including all taxes & service charges), air conditioner (a.c) 1.5 ton carrier (with including all taxes & service charges), air conditioner (a.c) 2 ton blue star (with including all taxes & service charges), air conditioner (a.c) 2 ton carrier (with including all taxes & service charges), freeze (samsung) 160 ltr, freeze (samsung) 180 ltr, freeze (lg) 160 ltr, freeze (lg) 180 ltr, water puryfier 12 ltrs (with including taxes & services), elctrical shagadi prestige 230vt, elctrical shagadi prestige 2000wt, honda co. generator (7 kva), honda co. generator (7.5 kva), honda co. generator (10 kva), honda co. generator (15 kva), honda co. generator (20 kva), runmax co.generator 13 kva (silent soundproof power electric diesel ), runmax co.generator 15 kva (silent soundproof power electric diesel ), runmax co.generator 20 kva (
Tender For auction sale of depot ferrous scrap - ubl/gsd/0426-0427 /ms/26/c [pl no.98987331] condemned and un- serviceable ms scrap consisting of ms/gi sheets, boilers, tube/pipes, cut channels, alternator covers ,ceiling fan rods, empty solar panels, bend, elbows, flanges, angles, frames, doors, trolleys, boards, nut & bolt, footsteps, fan motor covers, fan guard, sheets/plates, grills, shutters, ms bowls, ms trays, ms rope wires, racks, tie bar, boxes, rods/bars, ms window frames off sizes, fishplates, screw bolt, square chairs, ms grasser tanks, ms chaqured plates lt panel, cubical boxes steel bars in window frames, tie bars, coach light cut up part, iron doors off sorts & sizes. ms electrical boxes, ms rope/chain, channels, rail trolley wheel set, battery boxes, battery containers and ms stand, packing rings, angles off sizes, speed breaker, different types boards, wagon body cut parts, rail dolly, distressing rollers pantograph, coach light cut up parts and other ms/pway scrap ,with/without any attachments. available under the custody of cdms/rs ward/gsd/ubl. note:- bidder has to physically inspect the lot before bidding, cutting permitted by gas/manual during the course of delivery if any nfs, ci, ss and rails found in the lot should be returned to railways.location: road no -04 gsd/ubl bin no- 426-427. remarks-. delivery should start from one end. no pick and choose allowed.
Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)
Tender For repair/replacement galvalume sheets, ceiling and certain joinery related items in permanet and temporary bldgs of n-4, narendra ground and rama devi at afs chakeri , kanpur - taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed., ditto all as per item no.01 above but exceeding 1.5 sqm but not exceeding 4sqm each., dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed., framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde-e-165, s&f solid pvc door frame of size 50mmx 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube all as per specification and drawing., s&f factory made solid panel factory made solid pvc moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded pvc sheet on the front face & 2mm plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing, s&f pvc butt hinges medium weight, 100 mm long, complete all as specified and directed., s&f 150 mm size aluminum, anodised, barrel tower bolts of extruded section., s & f 125 mm long aluminum anodised bow handle fabricated type extruded section complete all as specified and directed., s&f 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 85 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50 x 125 mm for double shutter door comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum comp ressive strength of 58 n/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant note: for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of k value 58-60 (s