Latest air heater tubes Tenders | Government air heater tubes Tenders

CTN :45716965

13 Jul, 2026 3.27 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for remove the worn out runners from the main bagasse carrier bagasse elevator and return bagasse carrier errect 8x65 10x50 mm flat iron bars in their place clean the welded areas using a grinder , cut and remove the worn out bottom plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect new 6 8 10 mm , cut and remove the worn out side plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect 6 8 10 mm plates satisfactory trial run , cut out and remove the damaged and weak sections of the main bagasse carrier fabricate and errect a new assembly including the gear shaft system using the supplied plate , cut out and remove the weak and corroded sections of the bagasse feeding chutes errected boilers fabricate and replacements using the provided plates and repair the associated shafts and gears , the casings of the boiler id and fd fans have become severely weakened and damaged the task involves cutting away and removing the weakened sections fabricating , cut and remove the deteriorated side bottom and top plates surrounding the air heater of boiler no. 3 fabricate and errect new plates using the specified 6 8 mm plate in their original positions , fully strengthen the air heater plates and conduct a satisfactory trial. , dismantling the old air heater tubes of boiler no. 01 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 02 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 03 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , a. dismantling old columns beam channels etc. b. manufacturing and installing new columns beam channels , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to twenty hp , dismantling fabricating and erecting weak corroded pipe lines up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 and providing a satisfactory leak proof trial. , removing the old corroded platform and replacing it with a new one

State Government

CTN :45699708

16 Jul, 2026 1.61 Lacs

Korba - Chhattisgarh

Tender For work contract of application of rtv silicon sealants in air heater tubes of 210mw abl boilers during aoh of u#3, htps, korba west.

Central Government/Public Sector

CTN :45688982

24 Jul, 2026 NA

Ropar - Punjab

Tender For supply of spare for bhel boilers drg. no. 00-b-007-197 , replacement of platen super heater panels , spare for bhel boilers drg. no. 00-b-007-160 , replacement of final super heater panels -to manufacture, testing, supply of platen super heaterpanels as per drg.no.00-b-007-197 and 10-b-007-258/b.tube size: o.d. 54.0 dia x thickness 5.0, 5.6, 6.0 & 8.0 mmmaterial of construction: sa-213 t11 & sa-213 t22

Corporations And Associations And Others

CTN :45402417

02 Jul, 2026 NA

Rupnagar - Punjab

Tender For corrigendum : e-tender for purchase of boiler tubes/ibr tubes/air heater tubes - common e-tender for all nine working csm in punjab for purchase of boiler tubes/ibr tubes/air heater tubes.

corporations/Associations/Others

CTN :45666729

08 Jul, 2026 34.11 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of tubular protector for spacer tube , size l-1000mm , id-55 mm , tubular protector for rear w.w. screen tube , size l-1500mm , id-55mm , tubular protector for final s.h. tube , size l-1000mm , id-55mm , tubular protector for tertiary super heater & reheater size 1500x58.0x4.0 mm , tubular protector for tertiary s.h. tube , size l-1000mm , id-57mm , u clamp of size id-57 mm , u clamp of size id-63mm , tubular protector for economizer & primary s.h. vertical tube , size l-1000mm , id-52mm , tubular protector for economizer & primary s.h. vertical tube , size l-1500mm , u clamp of size id-53mm , tubular protector for pri. s.h. tube , size l-1500mm , id-45mm , u clamp for ash protector of primary sh horizontal size id-45 mm , tubular protector for sec. & ter. rh coil , size l-1500mm , id-64mm , u clamp of size id-65 mm , width 40mm , th.-4.0mm , 90 degree bend tubular shield for primary super heater horizontal size id-45.5 mm , reverse 90 deg bend ash protector for primary sh horizontal size id-45.5 mm , semi circular protector for spacer tube 60 deg bend size-1500x65x4 mm

CTN :45647293

30 Jun, 2026 11.00 Lacs

Sonipat - Haryana

Tender For purchase of instrument spares. - purchase of instrument spares., control valve 4 (4440) (pnuecon valves make) only diaphagram for boiler super heater control vbalve. sr. no- 210970776, model 810/pdo 055t, size- 3 characterstic-linear travel-38mm, supply failure-close, guage vaccum-760 (1968) (micro/forbes marshell make) dial-6 bottom connection, bsp thread, s.s 316 bourdon tube., jumbo ceiling rose (6240) (electromed make) jumbo display flow monitor, input 4 to 20ma, power supply 230 vac with tps-24 vdc raqnge 0 to 9999. having previous, current and flow rate, pressure gauge assorted size (4665) (forbes marshall/micro make) range 0 to 10 kg/cm2, dial size-6 bottom connection , bsp thread, s.s casing and ss-316 bourdon tube, rpm indicator for pt (6618) (beacon make) range 0-10000, cut size- (92*92)mm, power supply-230vac, signal input-24 d.c. output-4 to 20ma, air filter regultor (5000) (festo/jenetics make) fitting size-1/4 range (0 ti 10kg/cm2) with gauge, air filter regulator (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., air filter regultor (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., p u connecter lock bolt (2051) (jenetics/festo make), p.v. tube 8mm (4974) (jenetics/festo make) pu tube-size 8mm, rubber sheet for pan disc charge valve (2876) (puri make) size of sheet- 654*490*25, seal kit complete set for 12 pan (5746) (puri make) for kit for 12 discharge valve, c.s. steam valve (4504) (leader/sant/wj make) for steam/impulse lines class-300, conector (2032) (jenetics/airmax/festo make) for pu tube -8mm and bsp thread, discoratry valve (2031) (airmax make) connection size-1/4 , draught gauge (vacuum) dial size-6 (circular type) range- 1000/0 mmwc, fitting size-1/2 (m) bsp bottom side make- baumer/micro (3389) (forbes marshall/baumer/micro make) draught gauge-dial size-6 range(0-1000 mmwc), s.s body and bourdon tube ss-316, bottom connection b.s.p, guage indecator temprature 0-100 (3485) (forbes marshall make) temperature gauge-dial-6: range (0-1500 c), s.s body and bourdon tube ss-316, bottom connection bsp stem length-300mm, guage pressure 0-40 kgs/600 lbs (1965) (forbes marshall/genernal make)dial size-6 , s.s. body and bourdon tube ss-316, bottom conection bsp, guage pressure 0-40 kgs/600 lbs (forbes marshall/genernal make) dial size-10 ss body and bourdon tube ss-316 bottom connection bsp, kit 3 (1798) ( puri make) model-complete set of pneumatic cylinder of discharge valve, kit 8 (1797) (puri make) model-complete set of pneumatic cylinder of discharge valve, level flow transmiter (5385) (honey well make) range-0 to 10000 mmwc, make-honey well, supply-24 vdc, signal input-4-20 ma connection-1/4 bsp, ms seamless pipe (3608) (leader/sant/wj make) for steam/impulse line (class-300) of transmitter, pu connector 6 mm (367) (jenetics/festo make) one side tube connection-8mm, other side thread connection of bsp, pid controller, 72*72 mm, i/p-rtd, o/p-two relay (no-nc) (5010) (honey well make) input/output-universal, cutsize-92*92, make-honey well, model-dc-1040, supply-220 ac, plc card inpur/output for boiler (3867) (allen bradley make) model-1762-if2/of2, plc card input/output for boiler (3867) (allen bradely make) model-1762-if4/of4, plc controller (6180)(allen bradely make) model-micrologix-830, make allen bradely, with modules, pneumatic positioner for control valve (4823) ( aira/ytc/rotex make) type:- rotary, model: e/p-1000r, i/p signal:- 4-20 ma, air supply:- 0-7 kg/ sqcm, standard stroke-10-80mm, air connection:- , pneumatic positioner for control valve (4823) (ytc/aira?rotex make) type:- linear, model:- e/p-1000l, i/p signal:- 4-20 ma, air supply:- 0-7 kg/sqcm, standard stroke-10-80mm, air connection:- , positiner relay (5933) pilot valve realy for aira positioned, pressure gauge 2 kg (4772) (forbes marshall/genernal make) dial size-6 , ss b

CTN :45571051

02 Jul, 2026 NA

Jalandhar - Punjab

Tender For replacement of air heater tubes - dismantling & fitting of air heater tubes

CTN :45571053

02 Jul, 2026 NA

Jalandhar - Punjab

Tender For external and internal cleaning and checking of air heater tubes of boiler no. 1&2

CTN :45586875

02 Jul, 2026 9.00 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for labour charge for boiler roof front tubes screen tubes of 76 point 2 mm dia dismantaling , labour charge for boiler roof front tubes screen tubes of 76 point 2 mm dia fabrication , labour charge for boiler roof front tubes screen tubes of 76 point 2 mm dia fitting of tubes , labour charge for boiler drum to drum tubes of 63 point 5 mm od dismantaling , labour charge for boiler drum to drum tubes of 63 point 5 mm od fabrication , labour charge for boiler drum to drum tubes of 63 point 5 mm od fitting of tube , labour charge for side wall tube size 76 point 2 mm dismentalling , labour charge for side wall tube size 76 point 2 mm fabrication , labour charge for side wall tube size 76 point 2 mm fitting of tube , super heater coil od 44 point 55mm dismentaling , super heater coil od 44 point 55mm fabrication , super heater coil od 44 point 55mm fitness of tube

corporations/Associations/Others

CTN :45237118

15 Jun, 2026 34.11 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of tubular protector for spacer tube , size l-1000mm , id-55 mm , tubular protector for rear w.w. screen tube , size l-1500mm , id-55mm , tubular protector for final s.h. tube , size l-1000mm , id-55mm , tubular protector for tertiary super heater & reheater size 1500x58.0x4.0 mm , tubular protector for tertiary s.h. tube , size l-1000mm , id-57mm , u clamp of size id-57 mm , u clamp of size id-63mm , tubular protector for economizer & primary s.h. vertical tube , size l-1000mm , id-52mm , tubular protector for economizer & primary s.h. vertical tube , size l-1500mm , u clamp of size id-53mm , tubular protector for pri. s.h. tube , size l-1500mm , id-45mm , u clamp for ash protector of primary sh horizontal size id-45 mm , tubular protector for sec. & ter. rh coil , size l-1500mm , id-64mm , u clamp of size id-65 mm , width 40mm , th.-4.0mm , 90 degree bend tubular shield for primary super heater horizontal size id-45.5 mm , reverse 90 deg bend ash protector for primary sh horizontal size id-45.5 mm , semi circular protector for spacer tube 60 deg bend size-1500x65x4 mm

Air Heater Tubes Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others

corporations/Associations/Others