Latest air leg Tenders | Government air leg Tenders

State Government

CTN :45414122

15 Jun, 2026 1.90 Crore

Jalandhar - Punjab

Tender For prov installing and drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer const of pump chamber pumping machinery di fitting rising main ohsr of 250 kl capacity complete in all respect. - augmentation of water supply scheme village padhiana block adampur distt. jalandhar (under head: nabard 31/4215) providing, installing & drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer, construction of pump chamber of size 3.05m × 3.70m with wc, providing & installing pumping machinery, di fitting, disinfections unit, rising main(10kg/cm2), household connections with water meter and distribution system, solar panel, bulk meter, environmental charges, development of water works, construction of 1 no. ohsr of 250 kl (2,50,000 ltrs) capacity with sill level not less than 23.50m height upto fsl 27.50 m from formation level complete including the cost of inlet, outlet, overflow & scour & vertical pipes, di duck foot bends, expansion joints, puddle collar, lightening conductor, earthing, aluminium ladder inside the ohsr stair case, scour/overflow sluice valves, d/f extension joints, automatic electronic water control device and construction of plinth protection around ohsr, all civil works as per site complete in all respects.

CTN :45430246

15 Jun, 2026 4.78 Lacs

Ranchi - Jharkhand

Tender For repair cum maintenance of (a) shaper machine (b) radial drill machine and (c) vertical milling machine with replacement of components under gone wear and tear of cutting feed system, drilling feed system, clutch, gear and lever assy system of above

CTN :45412005

12 Jun, 2026 13.40 Lacs

Nuapada - Odisha

Tender For periodical maintenance with reaming and re-drilling of vertical porous hole of drainage gallery of spillway of lower indra irrigation project

CTN :45416078

30 Jun, 2026 NA

Cuttack - Odisha

Tender For supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

Central Government/Public Sector

CTN :45176892

10 Jun, 2026 NA

Kalol - Gujarat

Tender For corrigendum : supply of wire rope casing rope 34 mm ahwr-50 , wire rope main jib crane 16 mm ahwr-50 , wire rope tensioning cylinder 20 mm ahw* , wire rope drilling line 42 mm , wire rope mast jib crane line 14mmx40 m , wire rope vertical pipehandler crane-24 , wire rope vertical pipehandler manipula* , wire rope sling dia 26 mm x 15 m

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

State Government

CTN :45350048

08 Jun, 2026 15.60 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For drilling of 15 nos. 150 125 115mm dia 120 mtr. deep vertical telescopic tubewells in different habitations schools aanganwadies of block rajgarh district rajgarh including installation of handpumps and construction of cement concrete platforms ,

State Government

CTN :45350049

08 Jun, 2026 15.60 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For drilling of 15 nos. 150 125 115mm dia 120 mtr. deep vertical telescopic tubewells in different habitations schools aanganwadies of block sarangpur district rajgarh including installation of handpumps and construction of cement concrete platforms

State Government

CTN :45350055

08 Jun, 2026 15.60 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For drilling of 15 nos. 150 125 115mm dia 120 mtr. deep vertical telescopic tubewells in different habitations schools aanganwadies of block zeerapur district rajgarh including installation of handpumps and construction of cement concrete platforms

State Government

CTN :45350058

08 Jun, 2026 15.60 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For drilling of 15 nos. 150 125 115mm dia 120 mtr. deep vertical telescopic tubewells in different habitations schools aanganwadies of block narsinghgarh district rajgarh including installation of handpumps and construction of cement concrete platfo

Air Leg Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government