Latest air motor repair Tenders | Government air motor repair Tenders

Central Government And Public Sector

CTN :40621466

27 Jun, 2025 NA

Bengaluru - Karnataka

Tender For supply of "motor protection circuit breaker rated for 13a with 1no+1nc aux. contac ts with overlode setting 6-10a with manual on/off provision. the cb should have featur es of single phase preventing; thermal overload;a short circuit protection with din rai l mounting facility. similar to model no.3vu 1340-1ml with add on block of 1no + 1nc, ty pe 3vu9 131-3aa00 of siemens make or telemechanique make gvi-m14 with auxilary contac t block 1n/o + 1n/ctype gv1-ao1 or sprecher + schuh make model no.kta3-25-10a with ad d on block of 1n/o + 1n/c type kta3-25-pa-11 or equivalent." note: make offered shall be indicated.2.authorisation letter from the manufacturer shall accompany the quotatio n.note:make shall be indicated. 2 authorisation letter from the mfg shall be enclosed 3 rly's warranty of 30 mths from the date of delivery or 24 months from the date of pl acement in service shall be applicable." [ warranty period: 30 months after the date of deliver y ]

Central Government And Public Sector

CTN :40622263

17 Jun, 2025 NA

Bengaluru - Karnataka

Tender For " thermal magnetic motor circuit breaker 3ph, 415v, rated current 2.4a, du ty ac3, covering a minimum current setting range from 1.6 - 2.4a with the following fac ilities. a)din rail mounting.b) single phase protection.c) thermal overload & short circuit protection.d) shrouded contacts e)1no + 1nc auxiliary contacts rated for 4a,a t ac11 duty.the mpcb shall be supplied in assembled condition.similar to modelno.gv1m0 7 of telemechanique make. manufacturer's test certificate shall be enclosed along wit h supply of material.only the manufacturer/authorised dealers shall quote. warranty:12 months from the date of commissioning or 18 months from the date of su pply." [ warranty period: 12 months after the date of delivery ]

CTN :40581060

24 Jun, 2025 NA

Panchkula - Haryana

Tender For tender for supply of mpcb and mcb - motor protection circuit breaker asper iec 947 having magnetic thermal release with 1no aux contact range 2.5 - 4 amps make siemens or schnider , motor protection circuit breaker asper iec 947 having magnetic thermal release with 1no aux contact range 0.25 - 0.4 amps make siemens or schnider , motor protection circuit breaker 10-16 amps 3pole over load range 10 -16 amps 1n0 make siemens or schnider , air break contactor ac3 duty 4kw dol minimum current rating 9a aux.contacts 2no+2nc coil voltage 220v 50/60 hz along with suitable coil suppressor make siemens or schnider , air break contactor ac3 duty 5.5kw dol minimum current rating 12amps aux contacts 2no + 2nc coil voltage 220v 50/60 hz make siemens or schnider , air break contactor ac3 duty 4kw dol minimum current rating 9 a aux contact 1no coil voltage 220v 50/60 hz along with suitable coil suppressor make siemens or schnider , miniature circuit breaker as per is 8828 1966 iec 898 c type 1amp sp breaking capacity 10 ka make siemens or schnider , miniature circuit breaker asper is8828-1996 iec 898 c type 2amps sp breaking capacity 10 ka make siemens or schnider , miniature circuit breaker as per is 8228 1996 iec 898 c type 6amps sp breaking capacity 10 ka make siemens or schnider , miniature circuit breaker as per is8828 1996 iec 898 type c 4 amps dp breaking cap 10ka make siemens or schnider , miniature circuit breaker , asper is8828 1996 iec 898 c type 6 amps dp breaking capacity 10 ka make siemens or schnider

Central Government/Public Sector

CTN :40468765

09 Jun, 2025 48.55 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : procurement of spares of mineline private limited make flp vcb 3 3kv flp tsu 3 3kv 550v flp acb etc - isolator 400a , vacuum circuit breaker 3.3kv , potential transformer 3.3 kv , hrc ht pt fuse , primary side p.t fuse plate wiring assembly , h.t. control plate wiring assembly , voltmeter , fuse terminal , multicore bushing , indicating lamp , 3.3kv adopter , 3.3kv coupler , bullet pin 3.3kv , hv bushing , dc power pack , neutral monitoring relay with resistance , earth leakage 50 750m a and 750ma 2a dual settings , earth leakage relay 50 750m a with time lag with cbct , overload short circuit and motor protection relay , vcb aux .rotary switch , control relay , ht bushing , vcb shunt trip coil , timer , 3 pole oil dashpot relay , cover bolts , insulator assembly k3 on off , overload assembly breaker 110a 200a , overload assembly breaker 310a 400a , overload coil 200a , short trip assembly complete , shunt trip coils , no volt coil assy. under voltage coil assy. with moulding , catcher assembly , arc chutes , ammeter 200 5 for acb , ammeter 100 5 for acb , ammeter 300 5 for acb , ammeter 400 5 for acb , busbar , potential transformer , brass cone and gland assembly , indicating lamps , power cable for 300a for breaker chamber ic and og , limit switch 2no 2nc for breaker , brass terminal for cp , brass terminal with dmc insulator , terminal bushing insulator dmc incoming 10mmx25mm , on off isolator 300a , split type terminal box , on off isolator 400a , circuit breaker for 100a with complete assy. , circuit breaker for 200a with complete assy. , complete control wiring including pla relay ptds elm7 control fuses control plate wiring harness etc mounted on control plate or circuit breaker for 300a with complete assy , complete control wiring including pla relay ptds elm7 control fuses control plate wiring harness etc mounted on control plate or circuit breaker for 400a with complete assy , earth leakage 50 750m a with time lag , core balance transformer , on off isolator 100a , isolator handle , 1ph 5kva lighting transformer 550 440v sec.110v with mid point earthed , earth leakage relay , brass terminal with dmc bushing , brass stud with dmc bushing for og , magnetic ol relay , thermal ol relay , on delay timer , push button and element , isolator on off rev 100a , pilot relay , switch module , isolator on off rev 200a , on off rev isolator 300a , copper terminal bushing cp og , aux. contactor 220v ac , resistance

CTN :40540705

27 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.

CTN :40541325

20 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of radial-lip shft seal , valve spring , pan head rivet , rivet , 200a contactor with 110v operating coil , bearing (de nde) , pinion shaft , bearing , bearing , bearing , bearing , motor starter (contactor) , add on block 1 no contact , add on block 1 no contact , add ob block 1 no contact , 1 no contacts add on block for 3rt1.2-3rt1.7 , front mounted , 1 no contacts add on block for 3rt1.2-3rt1.7 , front mounted , soft starter rated 51a , indicating lamp integral led green colour 220-240v ac , indicating lamp integral led amber colour 220-240v ac , indicating lamp integral led blue colour 220-240v ac , indicating lamp red colour , 22 5 mm dia , 24v dc , oil level indicator , float switch , temperature sensor with display unit , suction stainer , element for return line filter , hose assemblies , proportional d.c. valve , pressure gauge , relief valve , pressure relief valve , counter balance valve , coiunter balance valve , coils for valves , friction lining group , main shaft , slipping clutch cum flexible coupling , contact kit for 25a t.p. contactor , 6a contractor 220v ac coil (5 no-3 no) , thermal over load relay 32-50a , o ring , fixing bolt , screw , non driving end bearing for motor , over load relay (2.2-3.1)a , thermister protection relay , over load relay (4.5-6.5)a , bearing , push button , kit contact for 70 amp tp contactor mcide , thermister relay (1no-1nc) (1e & 2a) , pilot lamp yellow lens 230v bulb , timer on-delay , control terminal 2 5mm , junction for accumulator , thrust , cylinder double action , roller bearing , lock plate , hydro pneumatic accumulator , bearing taper roller , support plate otside curved rail , inside roller strip , platform support plate , return pulley dia280 , roller holder , roller holder , cam follower 2 , shaft , bearing

Central Government/Public Sector

CTN :40511913

27 Jun, 2025 NA

Ajmer - Rajasthan

Tender For supply of mpcb (motor protection circuit breaker), current rating: 3-4a, thermal release range: 2.5-4 a, class:10, breaking capacity: 50ka, pole: 3p, voltage: 415v ac, 1no+1nc auxiliary contact block. as per sr no. 74 of bill of material (bom) of rdso specification no. rdso/pe/spec/ac/0184-2015(rev.0) & conforming to rdso spec no rdso/pe/spec/ac/0184 -2015 (re v. 0) suitable for use in ventilation fan unit. rdso approved make only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40485735

16 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of mpcb (motor protection circuit breaker), thermal release range - 1.6 to 2.5 amps, class -10, breaking capacity: 50ka, 3 pole, voltage rating - 415 volt ac, abb catalogue no: ms116-2.5, schneider cat alogue no. gv2me07, l&t catalogue no. st41895oooo, siemens catalogue no. 3ru2011-1ca10+3rv290 1-1e, confirming to rdso specification no. rdso/pe/spec/ac/0184-2015 (rev-0). accepted make- abb/sch neider/ l&t/eaton/siemens only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40152315

15 Sep, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of self priming monoblock pump (five terminal) 0.5hp/0.37kw, 415v ac, 3 phase, 50hz, 2 800 rpm, insulation class 'f' conf to rdso specification no. rdso/pe/spec/ac/0022 , rev -0, sept - 20 02 with amndt no. 1,with thermal switch as protection device embedded in the motor. [ warranty pe riod: 30 months after the date of delivery ]

Air Motor Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector