Latest air pressure gauge Tenders | Government air pressure gauge Tenders

Central Government/Public Sector

CTN :44800392

17 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of fuel oil level gauge to drg.no. tpl-0378 sheet 1 of 3,line-1 , alt-h, dlw part no. 11440030. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44547623

17 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : procurement of beml make dozer (bd-155) spares for chp . - link master,130ct51225,beml,bd355, track shoe,beml, idler assy,130tf00147,beml,dozer,bd355, universal joint assy,130uj01001,beml, hex nut,040202021300,beml,dozer,bd-155, spacer,130ct21199,beml,bd355, minor f.d repair,130fd00108,bd355, strainer,130fl91629,beml,bd355, seal kit,130hc02142,beml,bd355, carrier roller,130tf00139,beml,dozer, hose,130ss91005,bd355, hose,chh2201605,beml,bd355, hose,0710320415,beml,bd355, hose,0710000403,beml,dozer,bd-155, hose,0710000404,beml,dozer,bd-155, hose assy,768ph02053,beml,dozer,bd-155, hose assy,768ph02037,beml,dozer,bd-155, hose assy,768ph02045,beml,dozer,bd-155, hose assy,768ph02029,beml,dozer,bd-155, hose assy,821ph02121,beml,dozer,bd-155, hose,chh2220604,beml,bd355, hose assy,821ph02138,beml,dozer,bd-155, hose assy,821ph02081,beml,dozer,bd-155, hose,chh2200804,beml,dozer, hose,chh2201204,beml,dozer,bd-155, gasket,125oc71186,beml,bd355, relief control valve,767cv01008,beml, fuel level sensor,767eg81008,beml,dozer, cable tacho hour mtr,985eg11103,beml, operator seat assy,767os01005,beml,dozer, pilot oil device,768cv02029,beml,dozer, radiator assy,130ec00111,beml, wear ring,125tf73503,beml,dozer,bd-155, hyd pump assy,130hm01035,beml,dozer, fuel strainer,125fl92676,beml,bd355, protection device,51z7185373,beml,dozer, self starter,51z8200723,beml,dozer, fuel fltr cartridge,51z7185908,beml, hose,chh3025822,beml,bd355, o-ring,chs0113038,beml,dozer,bd-155, o-ring,chs0113095,beml,dozer,bd-155, gasket,125ec13163,beml,dozer, brake band assy,130br00188,beml, eng maint kit,51z9900906,beml,dozer, maintenance kit,51z9901619,bs6 d170, steering pump assy,130hm01027,beml,dozer, ring seal,130cs92769,beml,bd355, element,41z1280176,bs6 d170, element outer,41z1280184,bs6 d170, pilot pump,126hm01002,beml,bd355, universal joint assy,130uj01001,beml, pilot filter,781ph11813,beml,bd355, o-ring,chs0113062,beml,bd355, o-ring,0700015100,beml,dozer,bd355, bearing,cbb0006016,beml,bd355, bearing,0600032220,beml,bd355, bearing,cbb4006213,beml,bd355, hose,chh3611425,beml,bd355, relief valve,125tc03098,beml,bd355, clutch assy,130cs02006,beml,bd355, steering ctrl valve,130cv02073,bd355, bolt,0101032055,beml,dozer,bd-155, gear,130fd52349,beml,bd355, lift cyl assy,130hc01008,beml,bd355, lift cyl assy,130hc01016,beml,bd355, tilt cyl assy,130hc01024,beml,bd355, seal kit lift cyl,130hc02134,beml,bd355, hyd pump assy,130hm01035,beml,dozer, tube,130ph02284,beml,bd355, tube,130po02108,beml,bd355, tube,130po02116,beml,bd355, tube,130po02124,beml,bd355, service kit,130sk01009,beml,bd355, seal,130tc91776,beml,bd355, tube,130td02004,beml,bd355, idler assy,130tf00147,beml,dozer,bd355, pump assy,125tc03008,beml,dozer,bd355, carrier roller,130tf00139,beml,dozer, track roller assy,130tf00171,beml,dozer, track roller assy,130tf00188,beml,dozer, tube,130ph02292,beml,bd355, tube,1957131471,beml,bd355, tube,200600020001,beml,bd355, steering pump assy,130hm01027,beml,dozer, coupling assy,ccc0902400,beml,bd355, hose,chh1502029,beml,dozer,bd-155, oil seal,0701200100,beml,bd355, o-ring,chs0113022,beml,bd355, banjo bolt,11z7181912,beml,bd355, track roller,125tf00181,beml,dozer, carrier roller assy,125tf00198,beml, strainer,0705618416,beml,dozer,bd-155, water temp gauge,071005200050,beml,dozer, brake band,125br03008,beml,dozer,bd-155, gauge,125cs02024,beml,dozer,bd-155, m.kit,w/125/fd/k01,beml,bd-155, m.kit,1750400166,beml, gauge,125fl91103,beml,dozer,bd-155, hose,chh1502026,beml,dozer,bd-155, tube assy,125ph02553,beml,dozer,bd-155, tube,125po02126,beml,dozer,bd-155, tube,125ph02456,beml,dozer,bd-155, tube,125pt02034,beml,dozer,bd-155, service kit,125sk01043,beml,dozer,bd-155, rack roller assy,125td51725,beml,bd-155, idler assy,125tf00213,beml,bd-155, m.kit,floating seal,125tf00221,beml, shaft,125tf02263,beml,bd-155, hose,1750331511,beml,dozer,bd-155, universal joint,1752000050,beml,bd-155, control valve assy,125cv01028,beml, nut,125td11362,beml,dozer,bd-155, trans pump assy,07

State Government

CTN :44798192

28 Apr, 2026 1.97 Lacs

Durg - Chhattisgarh

Tender For the detail of works includes:a. the tenderer shall carryout the following works during annual maintenance contract period along with the servicing of the diesel generator set.1. general checkup & preventive maintenance and to fill up preventive checkup schedule as follows:a) check lube oil level and conditioning of lube oil, top up/refill if required.b) the oil filters shall be replaced whenever oil is changed.c) the air filters shall be cleaned periodically with compressed air, check batteries and top up the distilled water if required.d) check functioning of changing alternator.e) engine safety viz. high water temperature gauge, oil temperature gauge and high speed gauge shall be checked for their functions and repaired/replaced if required.f) coolant level and conditioning of coolant shall be checked and refilled if required.g) check fan and alternator drive belts and tightened if required.h) the governor shall be checked and tuned for proper functioning.i) check for leaks if any and shall be rectified.j) check reports shall be submitted every month/every breakdown calls.2. checking and servicing of engine for smooth running, its unusual sound and color of smoke and exhaust and set it right in case of deviations.3. checking and repairing and leakage of fuel, lubricating oil and coolant.4. cleaning and changing of air filters as per requirement.5. setting of valves tappets whenever required.6. checking and repairing of accessories drive, turbo charger and crankshaft endplay whenever required.7. checking of alignment of engine & alternator as per requirement.8. checking of throttle control and its setting.9. checking of instrument panel including replacement as and when required.10. checking of rotating diodes assembly in brushless alternator including replacement as and when required.11. checking of wiring system and repairing/replacement as and when required.12. repair and maintenance of relays including contractors in control panel.13. checking of battery terminal and de-sulphating.14. diagnosis of faults in engine and alternator and its rectification.15. breakdown calls to be attended on priority within 6 hrs.16. providing spare avrs, self-starter and accessories, free of charge, if the repair/overhaul/replacement is expected to be taken in more than two days.17. checking/repair/adjustment/replacement/servicing shall be carried under annual maintenance contract except cost of component/parts to be replaced due to wear & tear.18. the firm should undertake to arrange genuine spares of the diesel engine, alternator and amf panel as and when required within two working days.19. the tendererâ€™s service engineer shall visit the site for attending the generator sets not less than twelve times during the contract period (minimum once in a month) and shall inspect the generator set thoroughly. each visit shall take place during 1st week of each month.20. the tendererâ€™s service engineer shall visit once in two month for checking of electrical side viz. alternator, amf control panel, if any.21. the engine shall be run on no load or at available load, and should be checked for any leakage and abnormal noise. if any such abnormality noticed shall be diagnosed and remedial action shall be taken.22. standard check list:a) replace minor parts (i.e hoses and filters etc) sub-assemblies as and when required.b) service engineers during the visit will report on the performance or any other abnormality and inform parts requirement. he shall also submit the report on work done and recommendations as well as spare parts required.c) attend emergency call on priority (usually same day). however, if the engineer is required or any particular date and time, it would be the responsibility of the customer to intimate the contractor in advance.d) major overhauling/ top overhauling / pt pump & injector calibration /replacement of major parts/ rewinding of alternator or repairs or breakdown of the diesel generator set are to be charge

State Government

CTN :44774828

10 Apr, 2026 NA

Kolhapur - Maharashtra

Tender For installation of new gauge strip and painting to measure the water level of panchganga river at rajaram dam.

Central Government/Public Sector

CTN :44464625

13 Apr, 2026 NA

Saran - Bihar

Tender For supply of fuel level gauge

Central Government/Public Sector

CTN :44790280

05 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For standardization and upgradation work at lc gates (i.e. improvement of level crossing gate lodge, toilet block, water supply, surfacing of road and provision of standard height gauge fencing etc.) lc no. 312, 324, 326, 327, 328, 329, 331, 332,336,338, 339, 340,341, 342, 343, 344, 346, 347, 349, 350, 351, 353, 355 on brgt - kte and lc no. 94, 98 and 100 on bin - kte section under jurisdiction of sr. den (central).

Central Government/Public Sector

CTN :44772905

20 Apr, 2026 NA

Coimbatore - Tamil Nadu

Tender For supply of box type gauge cum level (bg) as per rdso specification no. tm-58 dt. 29.06.2001 (first revision of 2020) along with spirit level as per rdso specification no.tm-52 dt.24.05.2000 [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44720345

29 Apr, 2026 4.40 Crore

Jaipur - Rajasthan

Tender For supply of disposable laboratory items - container for urine, sputum, stool sample collection, leak proof with wide mouth, conical wide bottom & screw cap, 50 ml capacity with label for patient name, ward/opd and registration number, pack size – 1 x 100 , esr disposable pipette with tube, tube 13 x 75 mm clean transparent with graduation at 0.4 ml and 2 ml should allow to fill by air pressure through the rubber piston blood lift up – up to zero level. pipette should be made with transparent polystyrene with graduate d scale 0 to 180-200. it should be fine finished; pack size – 1 x 100 , evacuated blood collection tube with spray dried k2edta with lavender safety closure. it should be made of clear latex free polyethylene terphthalate. size – 13 x 75 mm with 4.0 ml, volume capacity. batch wise gamma sterilized /pyrrogenicity/toxicity certificate should be given. it should be iso and us-fda/ce certified. firm should provide training to technicians/nurses regularly for blood collection. clinical services should be documented by company. pack size – 1 x 100 , sodium citrate evacuated tubes for coagulation test with vacuum (with na. citrate – 0.109 m/3.2% plastic tube made of clear latex free polyethylene terphthalaste with light blue safety closure, 13 mm x 75mm vol. 2.7 ml. batch wise gamma sterilized /pyrogenicity/toxicity certificate should be given. it should be iso and us-fda/ce certified, firm should provide training to technicians/nurses regularly. clinical services should be documented by the company; pack size – 1 x 100 ,, evacuated tubes for silica-clot activator/silicon coated made of clear latex polyethylene terphthalate with safety closure 13 x 75 mm vol. 4.0 ml. it should be iso and us-fda/ce certified. batch wise gamma sterilized /pyrrogenicity/toxicity certificate should be given. firm should provide training to technicians/nurses regularly. clinical services should be documented by the company; pack size – 1 x 100 , blood collection needle 21 or 22 gauge with cap for evacuated tube. it should be iso and us-fda/ce certified and gamma sterilized certificate. firm should provide training to technicians/nurses regularly. clinical services should be documented by the company; pack size 1 x 100 , evacuated tube needle holder; pack size – 1 x 5 , "clot activator for serum with gel 3.5 to 4 ml, 13 x 75 mm 1. vacuumized blood collection tube should be suitable for venous blood collection from adults and children2. should be sterile, evacuated and pet and with safety closure and single hand operation for capping and decapping 3. should provide standardized filling of blood and fit snugly on holder. should have fill mark to indicate the draw volume4. shelf life should be minimum 12 months or more from the date of manufacturing 5. the quantity of additives in the respective tube should be as per nccls/clsi guidelines. 6. should provide different color coding cap for different additives.7. the tube should contain a label for noting the patient’s details8. manufacture should provide iso and us-fda/ce certification 9. expiry dates should be printed on blood collection tubes. blood collection should be gamma sterilized. paramedical to be trained10. batch wise sterilized /pyrrogenicity/toxicity certificate should be given. firm should provide training to the technician/nurses regularly, clinical services should be documented by the company (1 x 100)11. adequate/combustion data to prove that it is safe for the environment incineration pack size (1x100)" , "clot activator for serum with gel 5-6 ml, 13 x 100 mm1. vacuumized blood collection tube should be suitable for venous blood collection from adults and children2. should be sterile, evacuated and pet and with safety closure and single hand operation for capping and decapping 3. should provide standardized filling of blood and fit snugly on holder. should have fill mark to indicate the draw volume4. shelf life should be minimum 12 months or more from the date of manufacturing 5

Central Government/Public Sector

CTN :44773582

27 Apr, 2026 NA

Mysore - Karnataka

Tender For supply of air pressure gauge bp coach/ freight stock to rdso specn 02-abr-02, amendment no.4 ofsept - 2016 , appendix 'h' to drg.no. rdso sk-73553 alt-5. [ warranty period: 30 months after the date of delivery ]

CTN :43644891

04 May, 2026 NA

Delhi - Delhi

Tender For corrigendum : procurement of spares for mig-29 upg aircraft - ramp cylinder (lh), level gauge, jet level gauge, charging valve, filter, wedge flap cylinder (rh), wedge flap cylinder (lh), body, cylinder up lock contrl, pedal load cylinder, drain unit, jet quantity transmitter, safety valve, telescopic venting and pressurization uni, ventral drop tank lock (lh)., depressurization valve, electro magnetic valve, hood control mecha, telescopic unit (lh), telescopic unit (rh), fuel drop tank probe, air separator, vent flood valve, disk, disk, hyd damper, bearing

Air Pressure Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors