Air Pressure Vessel Repair Tenders

Get complete information related to latest Air Pressure Vessel Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Air Pressure Vessel Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Air Pressure Vessel Repair Tenders .

Filter

Loading....

Get Tender in Email

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :42948696

16 Dec, 2025 12.21 Lacs

Malkangiri - Odisha

Tender For corrigendum : repair of surge tank control room and store including beautification of area and repair of road at turning area at bhep, balimela.

State Government

CTN :42974586

30 Dec, 2025 83.10 Crore

Channagiri - Karnataka

Tender For design, supply, installation,testing and commissioning of lift irrigation system(head works consisting of construction of intake canal, jack well,pump house, control room,power supply including terminal bays sub station, transmission lines, rising main, gravity main distribution main, delivery chamber, thrust block, surge tank,service road,approach road,railway crossing, national highway crossing, cross drainage works, road bridges office buildings,etc) for feeding iidentified tanks in channagiri taluk of davanagere district by lifting water from right bank of tunga bhadra river near anveri village including operation and maintenance for a period of 5 years after successful completion of work channagiri tank filling scheme phase -i, on turn- key basis.

Loading, Please wait...

Air Pressure Vessel Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government