Latest air quality monitoring station Tenders | Government air quality monitoring station Tenders

State Government

CTN :45430002

13 Jul, 2026 NA

Goa - Goa

Tender For corrigendum : procurement of medical consumables items for use by the department of cardiac surgery, goa medical college - ported iv cannula 14g, ported iv cannula 16g, ported iv cannula 18g, ported iv cannula 20g, ported iv cannula 22g, non ported iv cannula without wings 21/4" 20g, non ported iv cannula without wings 21/4" 22g, non ported iv cannula without wings 2 24g, arterial cannula with switch 20g, ported i v cannula with safety device with self activating clip technology size - 16g, ported i v cannula with safety device with self activating clip technology size - 18 g, ported i v cannula with safety device with self activating clip technology size - 20 g, iv.macro sets with luer lock, blood transfusion set with 200m filter with luer lock, volumetric sets (non pvc) with luer lock (burrette set), pressure transducer kit (giving cco and predict hypotension ), 3-way stop cock (poly amide), 3-way stop cock with poly amide ext tube-10cms, nirs sensors compatable with hemosphere monitor adult, nirs sensors compatable with hemosphere monitor peadiatric, 3-way stop cock with poly amide ext tube-150cms, disposable syringes latex free size: 2 ml, disposable syringes latex free size: 5 ml, disposable syringes latex free size: 10 ml, pressure monitoring lines 200 cms male to female should have psi of equal to or greater than 500., pressure monitoring lines 200 cms male to male should have psi of equal to or greater than 500., disposable pressure transducers kits us fda approved, with interface cables ( compatible with philips and ge monitors ) atleast one cable to be provided free for every 25 transducers, single lumen 16g cvp catheter set in tray pack with needle with non kinkable guide wire appropriate dilator, introducer sheath to match sg/ cco/cedv/svo2/ref catheters, combi catheter (cco & svo2), triple lumen catheter 5 f 6 cms size 22,22,20 g with non kinkable guide wire with j tip, triple lumen catheter 7f 16 cms size 18, 16,16 heparin and antimicrobial coated with non kinkable guide wire with an appropriate dialator, transducer holders to hold 4 pressure transducers, endo-treacheal tube cuffed disposable 3.5, endotracheal tube plain 4.0 size microcuffed, endotracheal tube plain 4.0 size plain, endotracheal tube plain 4.5 size cuffed, endotracheal tube plain 4.5 size plain, endotracheal tube plain 5.0 size plain, endotracheal tube plain 5.5 size plain, endotracheal tube cuffed disposable 5.0 size, endo-treacheal tube cuffed disposable 5.5 size, endo-treacheal tube cuffed disposable 6.0, endo-treacheal tube cuffed disposable 6.5, endo-treacheal tube cuffed disposable 7.0, endotracheal tube cuffed disposable 7.5 size, endotracheal tube cuffed disposable 8.0 size, endotracheal tube cuffed disposable 8.5 size, bacterial filters machine end 22f/22m, heat moisture exchange bacterial and viral filters 22/15 hydrophobic only(pediatric), heat moisture exchange bacterial and viral filters 22/15 hydrophobic only (adult), dpt kits (10 nos of interface cable to be provided compatible with philips), anaesthesia masks reusable transparent 2 with air cushion, anaesthesia masks reusable transparent 3 with air cushion, anaesthesia masks reusable transparent 4 with air cushion, anaesthesia masks reusable transparent 5 with air cushion, oxygen therapy masks adult, oxygen therapy masks paediatric, ryles tube 8, ryles tube 10, ryles tube 12, ryles tube 14, ryles tube 16, rebreathing bags/reservoir bags 0.5 liters, rebreathing bags/reservoir bags 2.0 liters, incentive spirometer, bains ventilation circuit (disposable ) adult sizewith 2 litres bag, infant feeding tube size 5, rotem sigma complete cartriges for intem c, extem c, fibtem c, aptem c (rotem machine ), rotem sigma complete cartriges for intem c, extem c, fibtem c, heptem c (rotem machine ), breathing tube circuit adult compatible with the f & p 950 humidifer system. should be light weight with sprial heating inluded in tube wall and insulating layer to prevent condensation with in

CTN :45648864

02 Jul, 2026 NA

Bharuch - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - selection of agency for supply, installing commissioning& one year operation and maintenance of 4 nos of air quality monitoring stations at multiple locations in bharuch

corporations/Associations/Others

CTN :45617259

10 Jul, 2026 NA

Bacheli - Chhattisgarh

Tender For supply of 2200002085- continuous ambient air quality monitoring station caaqms , installation and comissioning , camc - first year camc charges , camc - second year camc charges , camc - third year camc charges

State Government

CTN :45451304

26 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : rfp for supply, installation, commissioning and 5 years of comprehensive operation & maintenanceservices of 14 continuous ambient air quality monitoring stations (caaqms) in the state of uttar pradesh

CTN :45569930

20 Jun, 2026 NA

Dahej - Gujarat

Tender For annual comprehensive maintenance contract (acmc) for the work of operation, maintenance and repairing of all and all risk comprehensive maintenance contract for all installed air quality monitoring station covering all manpower support, moving crane, transport, sensor replacement, cloud software and all allied accessories at dahej pcpir industrial estate

CTN :45384476

17 Jun, 2026 NA

Dharmapuri - Tamil Nadu

Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

CTN :45219998

18 Jun, 2026 1.11 Crore

Chhabra - Rajasthan

Tender For corrigendum : supply, installation, testing and commissioning of 02 nos. fixed station of continuous ambient air quality monitoring stations at ctpp,rrvunl chhabra

CTN :45230440

18 Jun, 2026 1.11 Crore

Baran - Rajasthan

Tender For corrigendum : supply, installation, testing and commissioning of 02 nos. fixed station of continuous ambient air quality monitoring stations at ctpp,rrvunl chhabra

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

CTN :45417603

09 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of mechanical department lab items - mechanical department lab items, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter

Air Quality Monitoring Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government