Latest air rotor Tenders | Government air rotor Tenders

State Government

CTN :45741096

07 Jul, 2026 9.10 Lacs

Udhampur - Jammu And Kashmir

Tender For impregnation / repair / rewinding of 25 hp motor alongwith allied works at malhar intake stage-0, repair to 50 ampere lt control panel alongwith allied works at malhar intake stage-0, repair to 100 kva voltage stabilizer alongwith allied works at ma

corporations/Associations/Others

CTN :45707328

03 Jul, 2026 NA

Ahmedabad - Gujarat

Tender For procurement of 17a1 dental consumable items - acrylic cold cure powder + liquid, acrylic fullteeth set, acrylic posteriro teeth set of 16, adhesive powder, air rotor hand piece spray, bott, alpine mounted stone for c.a hp/ st. hp, amalam capsules single use, anterior teeth set of 6 upper/lower, applicators tips brushes for bonding agent, arch wire- 032" round can wires ( straight, length), autoclave strip, barb broches n0.15-40, begg's buccal tubes weldable--- oval, beggs t-pins, blue inlay wax, bonding kit ( light cure ), bonding kit ( self cure ), brass lock - pins stege - 1, brass lock - pins stege - 3, brass wire, bristle brush for polishing, buccal tubes ( oval ), buff for polishing - bondable, buttons -rect-curved -1, calcium hydroxide with iodofoam, carbide bur cahp, carborundum disc, coe pack, combifin material set, composite finishing & polishing kit (abrasive, stris & discs), composite material, brown,white,black,yellow, composite placement instruments +, contouring instruments (teflon coated), core formers, dental floss, dental mercury, dental napkin, disposable sleeve cover for opg bite block, disposeble sucction tip, dowel pin, edta gel, elastic rubber rings indian, endo block, endo flass, expansion screw, expansion screw ( conventional ), expansion screw hyrax (size : 9 mm & 11 mm ), extra oral film - { size : 8"x10"} for kodak, system, flouride varnish, foamtray (flouride applicator) size- adult, formacresol, g.p.stick, gold alloy, gold castin wax, gutta percha cutter, hand protaper files, h-file, high hat pins -1, impression compound, investment materials, iodoform powder, iopa x-ray film for kodak system, light tranimiting wedges (010), liquid for electopolishing unit, low friction lig - ties, magic foam cord, mandril for sand paper, mandril for st.h.p., material for temporary gingival, miracle mix (silver reinforced gic), modeling wax, needle no 18 half circle, niti -file .02 taper ( 21mm) no. 15-40, niti -file .02 taper ( 25mm) no., 15-40, niti plugers no.15-40 assorted sizes, pediatric iopa x ray film{iopa size 0} for, kodak system, pesso reamers no.1 to 6, pretrimmed,precontoured,prefestoond s.s, crown, pumic powder, relining gel, relining material/soft reliner for acrylic, rotary protaper files, rotational wedges, rubber cup for ca hp, rubber dam sheets, sand for sandblasting unit, sand paper, sand paper sheets, scaler handpieces, scalertips, seprating medium, silver amalgam alloy, sodium hypocloride, steel valcanite trimmer, sticky wax, tooth preparation kit, topical fluoride gel (apf gel), universal polishing paste for denture, wax carving set, wires can beta - jit wires, zero degree molar teeth set of 16, preadusted edgewise 0.022 mbt kit, container complete no. 22 (plastic box), 8x10 dry view films 125 sht, non absorbable black braided silk surgical, suture on reel non sterile length 25/30 mtr, diametr 3-0, unolock syringe 2.5ml, rvg sleev for x ray(pktt-500), mercury (225gm), etchent jumbo syringed, occlusal film for x ray, fluride gel, fluride application tray, cool temp, metal alloy (white metal), prophylaxis paste, zinc oxide (100gm0, eugenol, 17% edta liquid, fiber splint, fogar solution, skyblue wax

CTN :45358214

13 Jul, 2026 18.60 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-18368 supply of various electrical items at kstps, kota - supply of 3 phase, 415v lt motors for unit #1 to 7 at kstps, kota., supply and retrofitting of oltc of unit auxiliary transformer-4b at kstps, kota., supply of conveyor carrying idler frame & carrying idler frame troughing trainer for conveyor system in chp area., supply, installation, testing & commissioning of vaccum type gaseous chlorinator system capacity up to 20kg/hr with all accessories for pre treatment plant clarifier-iii for u# 6 & 7 of kstps, kota., supply of submersible dewatering/ mud pumps for cw, bcw & dmcw area of kstps, kota. kst, supply of middle collectors (laterals/intrabed distributors) for strong acid cation vessels of dm plant, stage-ll, kstps, kota., supply of various electrical items at kstps, kota., supply of portable and trolley mounted fire-extinguisher of different capacities for first-aid fire fighting system (extinguisher) installed at kstps, kota., supply of valves at kstps, kota., supply of misc. rubber items at kstps, kota., repair/machining of components of turbine & auxiliaries of unit 1 to 7 of kstps, kota, online helium leak detection test of condenser vacuum zone of unit # 1 to 7 (stage i to v) of kstps, kota, day to day joinery works inside & outside plant site, kstps, kota, capital, routine & breakdown maintenance of c&i instruments and equipments of stage-i to v, analyser, dm plant, clarifier, ics and cctv systems at kstps, kota., annual rate contract for 6.6kv vpi and non vpi ht motor rewinding from 175 kw to 4000 kw with new coils of insulation class 'f' and other additional works of stator and rotor.

CTN :45357098

13 Jul, 2026 18.60 Lacs

Kota - Rajasthan

Tender For corrigendum : supply of various electrical items at kstps, kota- supply of 3 phase, 415v lt motors for unit #1 to 7 at kstps, kota. , supply and retrofitting of oltc of unit auxiliary transformer-4b at kstps, kota. , supply of conveyor carrying idler frame & carrying idler frame troughing trainer for conveyor system in chp area. , supply, installation, testing & commissioning of vaccum type gaseous chlorinator system capacity up to 20kg/hr with all accessories for pre treatment plant clarifer-iii for u# 6 & 7 of kstps, kota , supply of submersible dewatering/ mud pumps for cw, bcw & dmcw area of kstps, kota , supply of middle collectors (laterals/intrabed distributors) for strong acid cation vessels of dm plant, stage-li, kstps, kota , supply of various electrical items at kstps, kota , supply of portable and trolley mounted fire-extinguisher of different capacities for first-aid fire fighting system (extinguisher) installied at kstps, kota , supply of valves at kstps, kota. , supply of misc. rubber items at kstps, kota. , repair/machining of components of turbine & auxiliaries of unit 1 to 7 of kstps, kota , online helium leak detection test of condenser vacuum zone of unit # 1 to 7 (stage i to v) of kstps, kota , day to day joinery works inside & outside plant site, kstps, kota , capital, routine & breakdown maintenance of c&i instruments and equipments of stage-i to v, analyser, dm plant, clarifier, ics and cctv systems at kstps,kota , annual rate contract for 6.6kvvpi and non vpiht motor rewinding from 175kw to 4000 kw with new coils of insulation class fand other additional works of stator and rotor

State Government

CTN :45722552

13 Jul, 2026 NA

Chandigarh - Chandigarh

Tender For purchase of air rotor burs (quantity - 4020 nos.)

CTN :45615628

30 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of ecg patient cable 10 lead , ecg cable 7 pin round , spo2probe 6 pin single notch , spo2 6 pin double notch , bp cuff digital , endo motor , high speed air rotor hand piece with led

Central Government/Public Sector

CTN :45469070

02 Jul, 2026 6.75 Crore

Goa - Goa

Tender For corrigendum : annual operation & day to day maintenance of internal & external e&m installations at goa international airport for the year 2026-2028. - servicing, testing and checking of breakers , "servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. l&t make acb of rating 800-1600 a " , "servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. l&t make acb of rating 2000 a - 2500a " , servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. l&t make acb of rating 3200a - 4000a , servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. schneider make acb of following rating , servicing, checking and testing of lt air-circuit breakers including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. ge make acb of following rating , one time servicing, checking and testing of 33kv vaccum circuit breakers (vcb) including testing of wiring of standards and minor repairing works complete as required including documenting the testing as per recommended standards (through authorised agency of oem / agency approved by engineer-in-charge) followed with submission of test report to aai. make jyoti , servicing, checking and calibration of the following relays as per recommended standards and submission of calibration report complete as required through authorised agency of oem / agency approved by engineer-in-charge. , servicing of 3x 4kw grundfos make hydropneumatic pumps along with control panel which includes cleaning, safety check, motor, gear box, drive check, vfd parameters check etc. as per oem recommendation through oem or authorised service partner of oem. , servicing of 0.55 kw - 5kw grundfos make pumps which includes cleaning, safety check, motor, gear box, drive check etc. as per oem recommendation through oem or authorised service partner of oem. , dehydration & filteration of transformer oil of 1000 kva transformer of aai residential colony to improve the breakdown voltage of oil up to 50 kv by oil filtration machine and carrying out bdv test of oil, top up of transformer oil etc. by keeping the dehydration equipment out side the 33kv yard including transportation of filtration machine up to site etc. complete as required (excluding the cost of transformer oil). , "the execution of items mentioned in cpwd, delhi schedule of rates (e&m) 2025 for electrical repair and maintenance of electrical e&m installations as and when required as per direction of engineer-in-charge at goa airport for period of two years. agency will quote against basic rate of rs. 5,00,000.00 (say x) (including gst) in ""rate column"" for examples : (i) if bidder is quoting rs. 4,00,000.00 (including gst) (y1) then it will be

Central Government And Public Sector

CTN :45279869

29 Jun, 2026 2.90 Lacs

Ahmedabad - Gujarat

Tender For bid to ras corrigendum : supply of service 11 kv ht panel as per sepcifications , sf new mineral oil for panel etc as per sepcifications , calibration relay etc as per sepcifications , replacement digital ammeter for ht panel , replacement digital voltmeter for ht panel , replacment ryb ind lamp led type in ht panel , sf 2a hrc fuselink in ht panel , servicing 1500kva dry type transformer as per sepcifications , servicing 2 runs 2500a tpn bustrunking as per sepcifications , service mv lt panel with 2500a 4p acb 3 nos as per specifications , service mvlt panel with mccb incoming as per specifications , checking and repair of em intelocking , dismentaling 3.5 sq mm 240 or 300 sq mm al cable as required , pf adaptor box aprx 1.5 ft x 1.5 ft x 1.5ft of 16swg ms sheet as reqd , pvdg panel module door key as reqd , pvd and fixing operating handle for 250a 4p changeover as reqd , replacement 160a hrc fuse with base in extg cap panel , replacement 3p 50kvar cap duty contactor in extg cap panel , replacement 25sq mm cu lead wire 1ft length in extg cap panel , checking etxg 2no 25kvar cap bank and fault repair reinstallation , dismentaling uv protection connections as reqd , replacement digital ammeter for lt panel , replacement digital voltmeter for lt panel , replacment selector switch in lt panel , replacment ryb ind lamp led type in lt panel , sf 2a hrc fuselink in lt panel , sf 32a hrc fuseling incl removing faulty item from lt panel as reqd , sf 63a hrc fuseling incl removing faulty item from lt panel as reqd , sf 100a or125a hrc fuseling incl removing faulty item from lt panel as reqd , sf 250a hrc fuseling incl removing faulty item from lt panel as reqd , sf new 5 or 6 amp piano switch in replacement of faulty item , sf new 5 or 6 amp 3pin socket outlet in replacement of faulty item , sf new 15 or 16 amp piano switch in replacement of faulty item , sf new 15 or 16 amp 6pin socket outlet in replacement of faulty item , rewinding ceiling fan motor , sf 4ft 20w led fitting against faulty fitting , service of 750kva dg set as per specification , service dgset control panel 1250a 4p acb as per specification , repacement ryb ind lamp in dg set panel , repacement digital ammeter in dg set panel , earthing testing in existing earth pits and report submission

CTN :45673508

04 Jul, 2026 NA

Firozpur - Punjab

Tender For supply of double gauge o2 regulator 10x-13b , isolation ball valve 15mm , air rotor hand pc , contra angel hand pc , adult finger spo2 6 pin

CTN :45692588

02 Jul, 2026 16.49 Lacs

Jamtara - Jharkhand

Tender For water treatment plant cleaning,purchasing of equipments for wtp, laying of di pipes and sluice valves, construction of sv chamber and phed esr repairing for jamtara nagar panchayat. - labour for site clearance -do--e/i, desilting the supply well, intake well /head works, sump of water supply /sewerage works etc. in wet or dry condition including lifts upto 9 m and lead upto 150m as required beyond the work site,stacking, spreading, including necessary guarding, etc. complete, as directed by e/i, supplying and laying of rapid sand gravity filter sand, supplying and laying of rapid sand gravity filter gravel, supplying of bamboo for scaffolding works, supplying of narial ropes for binding works submersible pump set, requirement of plumber class-ii for opening & closing of valve & other related works, requirement of electrician grade-ii for making required connections & other related works, hiring of different tools,chain pulley & tackles for cleaning & other works, disposal of excavated earth & filter bed sand, sand (lead 02k+10p=12 km), gravel (22 k.m. lead), tyre coupling (unique 3409-gn tyre coupling for 100hp & 50hp), bosch lithium based grease, graphit gland pack rope 12mm, graphit gland pack rope 16mm, 2.2kw (3hp) foot mounted motor tefc 1500 rpm 3-phase motor for clariflocculator, multi-blade paddles mounted on central shaft driven by foot-mounted geared motor, onload changeover switch 800a,415v, 4 pole, digital voltmeter (0-500v)-3 phase indicator, digital ammeter (0-500a)-3 phase indicator, led indicator lamp or phase light (r/y/b/g), pvc/xlpe insulated pvc sheated heavy duty,armoured lt cable with aluminium conductor voltage upto and including 1100 v, 240sqmm, 3.5 core, 2.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, 1.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, laying of one number pvc insulated and sheated/xlpe power cable of 1.1kv grade of size not exceeding 35sqmm direct in ground including excavation, sand cushioning and refilling the trench, tapered bearing 7316 mcb (large), deep groove ball bearing 6311 mcb (small), chain pulley block hoist 5 tonne, 360 rotation, 3mtr lifting height, pipe wrench, 18 inch taparia adjustable heavy duty pipe wrench, pipe wrench, 14 inch taparia adjustable heavy duty pipe wrench, 1/2" sqaure drive flank drive taparia goti 22mm socket set, 1/2" sqaure drive flank drive taparia goti 20mm socket set, rachet wrench, 18 inch single sided rachet wrench, 1/2 inch drill bit for threading di/ci pipe, tata agrico hammer -dfs- 2.5kg, 6 inch tyton epdm/sbr rubber gasket for 150mm di pipe conforming to is:5382 isi mark, 4 inch tyton epdm/sbr rubber gasket for 100mm di pipe conforming to is:5382 isi mark, 6 inch di end cap flanged type for 150mm di pipe, 4 inch di end cap flanged type for 100mm di pipe, epdm rubber gasket for non-return valve, earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 150mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm repair), earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches wit

Air Rotor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government And Public Sector